Combo Edge 30 Day Challenge: 2-1-26 to 3-2-26
-
I apologize for the autocorrect errors in the details above.
Yes. You never forget the strange jobs. Pulling fairly fresh loop out of concrete is not that difficult, even with incorrect wire, as the sealant forms to the shape of the cutout, about 3/8” wide and 1-1/2” deep.
In asphalt, it is porous and the sealant is absorbs into the wall around the gravel material, that is used to mix the batch.Be the low man on the ladder, cutting loops was a given! It was dirty and dusty work. Sometimes wet cutting is mandatory. Minimum 2 loops per lane, about 4 hours per lane. I had gotten efficient and some days 2.5 hours a lane. Freezing weather the worst, as the sealant had to be kept warm, laying out of dashboard helped but some days the tube for freeze before empty. Each tube was 32oz.
In my 8 years of more I estimated I cut a thousand loops and was grateful when I was not assigned loops a given week. I was 66 when I retired.
Some sites like new hospitals, airports, a total of 120 or more loops on a single site. Parking garages with count systems involved 4 loops per lane.So now you know why my user name🤪. Joined MTo to learn about my ST300 during hotel stays Monday thru Friday.
-
HA! That's a cool origin for your user name.

<u>Day 25 - Mini Challenge</u>
I think we've all used our blades as screwdrivers, chisels, and pry bars at least once in our lifetimes. (Some of us still do.
)My then girlfriend, now wife, and I had just to moved to another apartment and we were trying to make dinner but we couldn't find where we packed the can opener. No worries, I always come prepared for just such an occasion. My Kershaw leek took one for the team just to illustrate. :D
-
Day 26
I learned early today that I had overlooked another tool fitted with a COMBO BLADE! 😊
My WINGMAN, it has a nice combo blade, sharp and shaped in the similar manner of my SIGNALs.

[attach id=0 msg=2565109]
In my defense, (i feel I owe it an apology😉), the WINGMAN is used primarily as my finger extension on days my digits just will not cooperate. Especially when working with LEGOS or producing artificial purple crawlers for my fishing grandkids.
The SPRING LOADED pliers make my task easier. Also, the scissors work well with the black cord I use to thread the hooks into the crawlers and tie the swivel.
I checked the SIDEKICK, it is a plain edge.

PS: actually LEATHERMAN does do a nice job producing function COMBO BLADES on their tools, as well as full SE secondary blades, very sharp, and stay sharp even after heavy use.

-
@AzteCypher said:
HA! That's a cool origin for your user name.
<u>Day 25 - Mini Challenge</u>
I think we've all used our blades as screwdrivers, chisels, and pry bars at least once in our lifetimes. (Some of us still do.
)My then girlfriend, now wife, and I had just to moved to another apartment and we were trying to make dinner but we couldn't find where we packed the can opener. No worries, I always come prepared for just such an occasion. My Kershaw leek took one for the team just to illustrate. :D
That there is the reason that I awlways carried a SAK for so many years, and joined MTO.
-
@LoopCutter said:
Day 26I learned early today that I had overlooked another tool fitted with a COMBO BLADE! 😊
My WINGMAN, it has a nice combo blade, sharp and shaped in the similar manner of my SIGNALs.

[attach id=0 msg=2565109]
In my defense, (i feel I owe it an apology😉), the WINGMAN is used primarily as my finger extension on days my digits just will not cooperate. Especially when working with LEGOS or producing artificial purple crawlers for my fishing grandkids.
The SPRING LOADED pliers make my task easier. Also, the scissors work well with the black cord I use to thread the hooks into the crawlers and tie the swivel.
I checked the SIDEKICK, it is a plain edge.

PS: actually LEATHERMAN does do a nice job producing function COMBO BLADES on their tools, as well as full SE secondary blades, very sharp, and stay sharp even after heavy use.
I know what you mean about the finger extender. … I think that’s the best description of what I used to use my original combo edge Cold Steel and SAK for most often. I fell out of the habit, for better or worse, when I started carrying my Leatherman Micra which is more finicky to open.
-
@ElevenBlade said:
That there is the reason that I awlways carried a SAK for so many years, and joined MTO.Silly part was I knew I had my Tinker somewhere... in one of those packed boxes.

-
-
@AzteCypher said:
<u>Day 26</u>Breaking out my Wenger Ranger 106 for the rest of this challenge. This is supposed to be a beast of a knife in my pocket however, I didn't feel it most of the time. Even when I sat down it seemed to disappear in my pocket. Here it is helping me open a new jump pack.
I need to get a jumper. There are so many options that I don’t know where to start! :ahhh
-
@ElevenBlade said:
I need to get a jumper. There are so many options that I don’t know where to start! :ahhhDepending on your vehicle type and amount of electronics, I recommend one with most cranking amps.
Strange to me, is that the feature I use most is the tire inflator. My KIA SORENTO is AWD and the sensors detect the smallest change in tire pressure, even from temperature changes, as fall 32° to a drop of 20°, may affect a two or three psi difference in one or two tires. Then best to fill all four to 34 or 36psi.
Works like a champ.AWD requires each tire to be same diameter and same pressure. If one tire goes bad it is suggested you replace all four.
Just my experience.
-
Day 27
My carry today,
[attach id=0 msg=2565156]😉 it is also BO FRIDAY😎
More appointments this morning :ahhh


-
@LoopCutter said:
Depending on your vehicle type and amount of electronics, I recommend one with most cranking amps.Strange to me, is that the feature I use most is the tire inflator. My KIA SORENTO is AWD and the sensors detect the smallest change in tire pressure, even from temperature changes, as fall 32° to a drop of 20°, may affect a two or three psi difference in one or two tires. Then best to fill all four to 34 or 36psi.
Works like a champ.AWD requires each tire to be same diameter and same pressure. If one tire goes bad it is suggested you replace all four.
Just my experience.
I didn’t know that about AWD. And I just noticed that one of my tires is 5 kPa below the others.
-
-
Day 28
Pleasant 48° this afternoon. Explored the area surrounding my homestead and decided it was proper to tidy up the yard. Picking up dead fall and items that were blown into the yard including a rubber ball, card board and some miscellaneous trash.
The SIGNAL’s saw help cut down large branches and the Gerber reduced the size of a rubber ball and card board for the trash bin.
[attach id=0 msg=2565284]
Enjoy your SATURDAY!

-
day 28 bonusPackaged delivered.
Gerber did honors opening
[attach id=0 msg=2565291]
Serrated no issue with paper shell, but inner package (plastic), plain edge handle much smoother.The freed contents,
[attach id=1 msg=2565291]Wenger 81 and Spartan 91mm economy(?), different shield and no scale tools.


-
That's a nice bonus right there LC!
<u>Day 28</u>
It was package duty today again but I had forgotten about this package. coming in.
Swiss cheese brain I guess. Oooh... swiss cheese sounds good. Need to put that on the grocery list.This one was a fun package though as it arrived with a few goodies from a knife lot.
-
Three sharps,

Almost did not see the SAK, a Wenger Traveler? , love the colorful scales. It blended into the colorful picture.
-
@ElevenBlade said:
I didn’t know that about AWD. And I just noticed that one of my tires is 5 kPa below the others.Yes, in AWD, it is my understanding that, power is applied to one front tire and one rear tire opposite.
There are sensors that monitor the rational speed of each wheel. If one tire is low, it is spinning at different speed than the other three and then the transfer case adjusts which wheels are getting power.Have been told in a coffee shop discussion, a persons wife ignore the tire pressure warning for a long time, one was low by three or four PSI.
EVENTUALLY BURNED OUT THE transfer module, cost a couple thousand $ to replace. Instead $.75 to inflate a tire or four to recommended specs. -
Day 29
The PASTEL colors of the SIGNAL Family match the colors of,
[attach id=0 msg=2565345]
The GUAVA color blends in nicely on a lovely SUNSET as the sun lowers behind the horizon.
The COYOTE BROWN blends well with the sands of any where the raw dirt is exposed.
And, the AQUA color of many bodies of water that we desire to relax in on vacations to sunny warm climates.
The Combo blades of these three tools are sharp and mesmerizing.
One day to go😉 🌹 😎

-
Those pastels do work well with that background!
It's a Wenger Commander from the Snife Series.
SAKWiki | Wenger Snife Series
SAKWiki - The online Swiss Army Knife Encyclopedia. Information and Identification on Swiss Army Knives by Victorinox and Wenger.
SAKWiki (sakwiki.com)
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







