Opinel and Peasant knife owners club
-
Buy cleats!
Helps on ice even when snow is present!
-
I had a small pile by the back door but I should've made a bigger one. Lesson learned.

Funny you mention cleats LC. It's not until after I came back inside that I remembered I had bought some lawn aerators that tie on to your feet. Bet I could've used those.

-
that would be the scene, elevated cleats!Reminds me of an ice storm in Michigan, I was maybe 10 or eleven.
Ice was very thick and smooth, the type that did not crack when you walk on. Even in the yard.
My mom strapped on her ice skates and had a ball skating from the driveway (which was pea gravel) into front yard. She loved to skate, and was very athletic.
After a good 45 minutes she came back into the breezeway. Took her skates off, and put her sneakers on. Then remembered she meant to grab the mail. Walked/slide down the driveway.
Fell and hit her head hard, I went out to help her, blood everywhere. Got her in the house, kitchen towel served as compress.
Neighbor drove her to hospital. 8 stitches. And mail was still in the box.
She kept recalling that day, even into her 90s. “Should have put those skates back on!”Maybe her only fail. My mom was pretty and perfect!
-
Another Opinel photo from my chilly walk yestiddy. For some reason I like how the blue part peeks out from between the locking ring. I'm not sure exactly why. I have enough beeswax lip balm distributed in the area where the blade tang pivots to make opening easy. My carbon No.8 was very sticky for a while after I got it but opens easily now. Same with the blue one. I might get the yellow one out later. Best wishes. G

[attach id=0 msg=2561663]
-
I like the way the BLUE just pops!
It is -3° this morning, feels like -19° and to get colder by the week end. No walk today.
Stay safe my friend.
-
Art and I just got in. It was -5 here at 6 am, now up to a tropical 25 degrees F 🦜🌴🍹🍍. With the wind it's still below zero. I have an air force high altitude parka that has spent the majority of its life hanging out because it's too warm for most winters. It's definitely making up for lost time this year

-
@LoopCutter said:
neo6. OPIFLLEX. Part 2[attach id=0 msg=2538643]
The blade’s tip is not pointed. Reminds me of a typical butter knife that is part of my table ware.
No understanding or explanation provided.
I can see a benefit, if shucking nuts like walnuts or almonds, you will be less likely to poke your skin and bleed.
It is duller than any Spley blades I have. Not likely to cut contents of a package slicing the blades edge across the tape. 😉
[attach id=1 msg=2538643]
Comparison to my No6 walnut blade with point. Length not sacrificed.[attach id=2 msg=2538643]
And, the handles are the same size.
The lanyard tube is only difference.The size is right for my neck sheath that I have for my garden knife. And, the thin leather lanyard does make it easy to extract.
I did not try the free sheath, it is listed to be compatible with. o6, o7, & o8 models.
It does not have a belt loop, instead a longer tie, likely to be looped around a belt or belt loop.
Regards
I've only just noticed that these non-locking Opies exist and I felt sure someone here would have some details. Cheers for the guide LC.

-
I mentioned in a previous post about checking on my Opies after a prolonged rainy spell. The wood handled Opinels always stiffen up some and have since the beginning. Hygroscopic tendencies for a natural material, right?
I read how the French workers would take a paper match and rub petroleum jelly into the sticky joints of their knives. If a Frenchman isn't well acquainted with Opi problems, then who is? I went with something similar.
My solution was to use a lip balm containing beeswax. Worked like a charm. When I was doing the Soldier challenge, I checked out my other SAKs and things to see nothing was succumbing to the moisture laden conditions. Several SAKs had a little gritty feel on opening. I brushed them with an old toothbrush and it freed up all of them. The Opies were a little hard to open.
I assumed the woodies would be sticky. They were. Both beech handled and painted/dyed hornbeam felt about the same. Usually the beech is first to get hard to open. They both got the beeswax treatment and loosened right up. Then I opened the No.09 DIY model. Plastic never absorbs moisture, right. The yellow plastic Opi was stiff. The temps by themselves might have made a change, since the plastic can't soak up water. I then ran a finger across the screwdriver bits that are held in the handle by friction. Not to see how tight they were, just passed a finger across very lightly. One bit fell out. I pressed it back in more tightly than before and gave the joints of the blade the beeswax cure. Instantly it felt just like always. If you have one of these and it has been subjected to temperature change, you might want to inspect your bit slots for looseness.
Best wishes. G

[attach id=0 msg=2565695]
-
A very good PSA!
Never thought of lubing the pivot of the DIY. And I do check the bit holder. Usually require a bit or both to be pressed into place.
Even thought of just wrapping a piece of electrical tape around the handle and then replace as needed.
-
I thought of using a couple of short strips of black electrical tape to retain the bits as well. There is a good possibility that the electrical tape could be just as useful by itself. Similar idea to carrying duct tape for a MacGyver inspired precaution. Best wishes. G

-
I know wonder if the stretchy wrap labs use after blood draws would work, as it sticks to itself, not so much to your skin. So no residue on the handle, plus comes in many colors.
I had used athletic trainers tape for this reason, less residue. Or, even the old style cloth electrical type tape I would use instead of band aides on the farm before the fancy 3M stuff was made.
-
Seems like a couple tiny rare earth magnets would require more effort upfront than the tape, but be a more permanent solution and more convenient to actually use the bits.
-
I must say Nate, that is a very good idea!
I however would be very concerned that the magnets could disrupt the natural balance of such a precision tool🤪
-
About 2 3/4 inches of tape is about the maximum length of tape unless you go down the length of the handle. Naturally you could take several turns of tape around the handle, but then you couldn't access the blade. I like the idea of having a little tape on hand. If the bits fall out, I think I will tape them . Best wishes. G

-
@LoopCutter said:
I must say Nate, that is a very good idea!I however would be very concerned that the magnets could disrupt the natural balance of such a precision tool🤪

-
[attach id=0 msg=2565798]
The peasants demanded to be heard from. So, I took a Svord photo. Seems like there was a lot of talk about these things a few years ago, then the interest sort-of faded. People bought one. Carried it a time or two. Found out that it takes up quite a bit of pocket space. Laid it aside. People got interested in something else.Best wishes. G
:(
-
Gary- is that considered a FRICTION folder?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login