The SAK Whittling Club
-
-
@pfrsantos said:
+1


-
I have been following The Maker Experience for a while now on YouTube.
Check out what this guy makes with a bog standard Explorer!
His tutorial videos are excellent, and he explains all the steps he's doing, proportions, reasons why, etc, and his carvings are amazing -
They say in wood carving and whittling forums etc that basswood is what you want as a beginner.
I have never had access to any locally here in Australia. However, my wife has an Amazon Prime account, so I had a look at what was on offer.
For not too much money, I was able to get a couple of different batches of Basswood from Chinese suppliers.
From my research the Chinese Basswood differs from American basswood varieties a little bit, both Tilia varieties but possibly similar to the European basswood that is sold by Beavercraft.[attach id=0 msg=2566114]
[attach id=1 msg=2566114]
Having some 1"x1"x4" pieces to muck around with and experiment on different animals, caricatures, or trinkets I can then try things out in the Tassie woods I have ready access to.
[attach id=2 msg=2566114]
[attach id=3 msg=2566114]
I have held off making some of these things in the past like a chain, want to try some pliers or scissors at some point




-
Holy crap, that's amazing; the chain is so cool! Did you modify the small blade to be better for whittling?
-
@TazzieRob said:
They say in wood carving and whittling forums etc that basswood is what you want as a beginner.
I have never had access to any locally here in Australia. However, my wife has an Amazon Prime account, so I had a look at what was on offer.
For not too much money, I was able to get a couple of different batches of Basswood from Chinese suppliers.
From my research the Chinese Basswood differs from American basswood varieties a little bit, both Tilia varieties but possibly similar to the European basswood that is sold by Beavercraft.[attach id=0 msg=2566114]
[attach id=1 msg=2566114]
Having some 1"x1"x4" pieces to muck around with and experiment on different animals, caricatures, or trinkets I can then try things out in the Tassie woods I have ready access to.
[attach id=2 msg=2566114]
[attach id=3 msg=2566114]
I have held off making some of these things in the past like a chain, want to try some pliers or scissors at some point
Nicely done!

-
@Tuisto said:
Holy crap, that's amazing; the chain is so cool! Did you modify the small blade to be better for whittling?
Yes, based on Chris Lubkemann's style of roosters and branch whittling, the narrower tip helps to get tighter turns. It isn't strictly required, though, I'd also like to have a more standard small blade in there as the upswept tip does give better access to some spots
-
@TazzieRob said:
…the narrower tip helps to get tighter turns. It isn't strictly required, though, I'd also like to have a more standard small blade in there as the upswept tip does give better access to some spotsI realize this is the SAK whittling thread, but have you tried any of the trad whittlers?
-
@nate j said:
I realize this is the SAK whittling thread, but have you tried any of the trad whittlers?No, they aren't as common here in Aus as they would be in the US. I keep my eye out at markets for old knives but they're usually crappy Chinese SAK or Leatherman knock offs. I think a seahorse or congress pattern would be good ones to try.
Check out this dude's 60yo Case congress! (r/whittling on reddit u/HolidayUsed6866)

-
There are some people that would accuse him of ruining a perfectly good knife. Every time I see a knife like that I seem to always assume that the modifications were intentional. Very rare to see a whittler (the person) that uses a stock knife.
-
@TazzieRob said:
I think a seahorse or congress pattern would be good ones to try.I’m not really an avid (or skilled) whittler, but I think you would be pleased with a Seahorse if you can get one…

-
@TazzieRob said:
That is a nice looking knife

I initially found the design somewhat off putting visually. (And I still don’t think it is ideal for general utility use.)
But when I held one in my hand, I realized it actually makes a lot of sense for what it was designed to do.
-
I have a Seahorse and I am not a fan of it at all. The main blade is way too thick. So it just sits in my collection at this point.
-
@MTSAK said:
I have a Seahorse and I am not a fan of it at all. The main blade is way too thick.I understand where you’re coming from.
The main blade is quite thick, especially at the tang and the spine near the tang. But it tapers significantly from the tang to the tip, and is flat ground, resulting in an acute point that is strong with minimal flex.

-
OOPH!
Small Congress (3 1/8") $135-$150 AUD plus shipping
Seahorse $160-$210 AUD, plus shipping.Can usually get a Vic Hiker for less than $50
Rough Rider versions roughly 1/3 price of Case
-
@TazzieRob said:
OOPH!Small Congress (3 1/8") $135-$150 AUD plus shipping
Seahorse $160-$210 AUD, plus shipping.Can usually get a Vic Hiker for less than $50
Rough Rider versions roughly 1/3 price of Case
Case was never going to be the low-priced option, though they are a bit cheaper over here (even factoring in the exchange rate; all prices in USD). Small Congress $70 - $90; Seahorse $80 - $120 (not counting things like Yellowhorse Customs, which go for a massive premium).
Vic Hiker around $36, so that’s pretty comparable given the exchange rate.
Most RRs here around $20, give or take. The higher-end Rough Ryder Reserve line is more like $50 - $60. Not sure if you have any RRs, but my opinion is that while they tend to be somewhat chunkier/heavier and less refined than Case’s designs, F&F is generally excellent, they are functional knives, and good value for the money.
-
@nate j said:
Case was never going to be the low-priced option, though they are a bit cheaper over here (even factoring in the exchange rate; all prices in USD). Small Congress $70 - $90; Seahorse $80 - $120 (not counting things like Yellowhorse Customs, which go for a massive premium).Vic Hiker around $36, so that’s pretty comparable given the exchange rate.
Most RRs here around $20, give or take. The higher-end Rough Ryder Reserve line is more like $50 - $60. Not sure if you have any RRs, but my opinion is that while they tend to be somewhat chunkier/heavier and less refined than Case’s designs, F&F is generally excellent, they are functional knives, and good value for the money.
Yeah, with import duties and all that we pay about double for American stuff, like Leatherman etc, not just a direct exchange rate comparison.
Given our English Colonial heritage, i'd say Sheffield cutlery brands would possibly be more prevalent here.
I have asked my Dad what old pocket knives he might have lying around. I remember on the farm he always had a Barlow style, bone scale 2 blade pocket knife. I also remember one stormy night he was in the shed trying to free up an old stuck knife and somehow it slipped, and we had to drive the 18km into town in lightening and thunder for him to get it stitched up.
My fist pocket knife was a SAK, maybe an Angler or Fisherman, I can't really remember, but it had a fish scaler and didn't have pliers. My Great Grandparents bought it for me for my 6th birthday, 1989. Unfortunately I lost it out of the sheath on my belt whilst chasing cattle up some rough bushy back paddock on the quad, so i bought a Vic Huntsman to replace it, which I still have ~30+ years later. I've had SAKs therefore, a majority of my life.
-
This is one of my Dad's old pocket knives, a Joseph Rogers Barlow with clip point and pen blades.
The clip point needs some of the blade stop grinding down to get the tip back into the frame, and an edge straighten. Then it all needs a good clean and sharpen. The scales are some sort of plastic and appear to have shrink, could potentially replace with some nice Tassie hardwood.[attach id=0 msg=2569260]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login