Spirit owners club
-
@LoopCutter said:
That you should! 😘It is thin at the point. The blades are not large to begin with, considering the handle size.
Yours looks very nice. I always consider mine a work of art when I use and continue to be amazed that everytime I put it back in the sheath after wiping down from the grease or dirt and even mud, it looks nearly new.
I always find it curious how much empty space there was in the spirit and how much bigger they could have made the tools.
A small saw makes sense, since it lessens the chance to bind up. The blade is curiously small, the one handed opening blades seem smaller than the two handed blades. The file is also smaller than one would expect
-
@LoopCutter said:
Doing that would result in an even shorter blade, not gaining any benefit. Even loosing the needed nail Nick to extract the blade.I mean one benefit would be not having to send it in
Also a nail nick is a problem that a dremal could address
-
@Richard Zheng said:
I mean one benefit would be not having to send it inAlso a nail nick is a problem that a dremal could address
That is a good point, not sending it via post with chance of parcel being misplaced.
Yet the tool does have a quality support team behind it, and the owner is on the same continent as Victorinox’s home base.
This is a good example, of the advantage of STROPPING VIC’s steel, instead of stones with grit that remove material quicker.
My MXBS’s blade is smaller, the only disappointment with the tool. I consider myself a newbie as SAKS are concerned, observing the same components are utilized over and over across so many models.
Thank you for sharing your observations, the file and saw particularly!

-
@LoopCutter said:
That is a good point, not sending it via post with chance of parcel being misplaced.Yet the tool does have a quality support team behind it, and the owner is on the same continent as Victorinox’s home base.
This is a good example, of the advantage of STROPPING VIC’s steel, instead of stones with grit that remove material quicker.
My MXBS’s blade is smaller, the only disappointment with the tool. I consider myself a newbie as SAKS are concerned, observing the same components are utilized over and over across so many models.
Thank you for sharing your observations, the file and saw particularly!

With my MXBS I actually put a steeper angle on that knife, I think mine is around 15 degrees, find its really good at slicing.
-

One of my boys was busy today.
-
Excellent!!
-
@FrenchEOD said:
what a great picture
I found my new wallpaperWallpaper is a great idea for that image!
Does my phone lock screen have a picture of my kids or a Spirit? Tough decision

-
[attach id=0 msg=2567352]

-
So this winter we had a total of almost 3ft of snow. The last several weeks all that snow plus a couple inches of rain has melted off and our basement took the brunt of that elevated water table. To combat the standing water I had to get a submersible pump and find a way to drain it.
I took a broken expandable house and cut it to length and removed the cloth housing with the Spirt scissors. This allowed me to fit the water to temporarily drain into the washing machine discharge tube. As we all know, these snips cut through rubber no problem.
[attach id=0 msg=2567360]
I guess I need to install a sump pump!
With all this melt our neighbor called saying she had water in her basement and heard rushing water. It sounded like her sump wasn’t draining so I went to take a look. Thankfully, the discharge PVC has just come uncoupled. I used my Spirit to remove a cover plate and reattach the hose clamp. But, I also found the flipper special outlet for her sump. An uncovered outlet right next to the sump discharge and it was soaked! I had to remove that outlet and install a GFCI out of the splash zone. Now she’s up to code and safe.
[attach id=1 msg=2567360]


-
Great use GB!

-
@Barry Rowland said:
Great use GB!

Thanks, Barry!
I wish I had taken pics and logged all the use this Spirt has gotten over the last several months. It has definitely taken a beating. I bought it used but it was like new.
The Phillips is starting to wear down. The file has some significant wear it’s much less aggressive than my backup Spirit. I’ve resharpened the chisel tip, wire scraper, and blade serrations a dozen or so times. The saw is still wicked sharp but I can tell it requires more force to get as clean of a cut. The flat heads especially on the cap lifter tool are rounding off. The snips still work well but there’s some play in blades. The pliers are really worn down. Surprisingly I haven’t really dulled the cutters and the hard wire cutters have snipped countless finishing nails and copper wire.
[attach id=0 msg=2567524]
[attach id=1 msg=2567524]
This tools is such a beast. I am however wondering if Vic should take a note from Leatherman and make the plier teeth a tad more aggressive.


-
The Spirit, beauty and brawn in one gorgeous package!
I'd like to see that too. You've definitely gotten use out of yours GB

-
Ok, one more from today. Crimped the thread on these aluminum fly wheel covers on my kids fishing poll. I had to unscrew it to snip and re-line a tangled mess and it just wouldn’t rethread.
[attach id=0 msg=2567565]

-
At first I didn’t see the Spirit, only strawberries!

Market or did you pick those?
-
@Grand_Banana said:
At first I didn’t see the Spirit, only strawberries!

Market or did you pick those?
We have a yearly tradition of taking a road trip to buy strawberries straight from the farm

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

