SAK cleaning & grumbling
-
I managed to salvage a spring for the scissors off one of the junkers I'd picked up along the way. Now, to get 'round to removing the spring residue from the damaged Huntsman... Yeesh.
I actually washed these in water with a tiny drop of dishwashing soap in it. Flushed them, let them dry, then used WD-40 on them. (I know some people go :ahhh over that, but it works for me, and I clean it up afterwards.) I've used Simichrome to take REALLY bad stuff off of blades, etc. (Mainly because I have a supply here, as it's widely used to clean the metal parts of fountain pens.) The last thing I generally do is put a tiny drop of 3-in-1 on the joints. Again, it works for me. If I ever do any food prep (which, for me, is generally limited to peeling/cutting up fruit), I wash the blades.
So far, I've had no trouble. But, then, I don't generally put my knives through massive amounts of sturm und drang, so... :D
:tool:
-
And a bit more grumbling...
I finally decided to fix up a Climber in the junk bin. All it needs is a new set of scales, and a new spring in the scissors. (I cannibalized the spring for the Huntsman...) While digging through the bin to see if there was anything else I could maybe salvage, I hit a Wenger Backpacker that was only lacking the Wenger emblem, and a Wenger Tradesman with some chips out of the end of its scales.
I had a really bunged up low-end Wenger advertising knife and. well the choice between it and the Backpacker was easy. I prysed the emblem out of the ad knife, and set it aside. Then started to clean up the Backpacker.
And ran into a mess that made the Huntsman above look clean. I'm not sure what the mass was gluing the the can opener and the saw together was, nor what the white substance is that's practically glued the screwdriver/caplifter into the handle... The stuff on the can opener & saw sorta looked...well...organic... I really don't want to know... I dug off the worst of it, and now have the knife in some cleaner for a bit...
Good God...................
Who were these owners?? I really want to find them, and

-
My friend, you have not yet even come close to the worst substances that can be found in used SAKs. At least you are only dealing with inorganic matter... :o :D :D
-
@max6166 said:
My friend, you have not yet even come close to the worst substances that can be found in used SAKs. At least you are only dealing with inorganic matter... :o :D :DOh, I have my suspicions about the composition of whatever the Hades was in that Backpacker. It looked like certain organic materials that shouldn'd be anywhere near a knife... :ahhh
It actually got worse when I opened up the Tradesman... I swear to God it looked like someone puked in that knife! :o And it was packed down in the chassis of the knife. I almost wanted a pressure washer to take this stuff out...
Maybe it's just because I'm coming from a background of repairing fountain pens, where the worst you get is generally a mass of 60 year old solidified ink (think something akin to blue-black concrete), or a melted filling bladder. Occasionally you'll get a pen where some nasty little lifeform took root in the ink and made the pen it's home. (This is colloquially referred to as "SITB", or "Slime in The Bottle". You can generally smell it the minute you open a bad bottle of ink, or uncap a contaminated pen.)
I don't like cleaning a puke analog out of a knife... :D :D
-
Ok, I take it back. Sounds like you are starting to get a glimpse of some SAK horror sludge. :D :D
Personally, I have developed strong misgivings about using any used SAK that hasn't been thoroughly disassembled before cleaning.
Removing scales is usually no longer enough for me if I plan on regularly using the SAK. I once thought I had cleaned a SAK thoroughly and EDCed it for a while. I later disassembled it and found some very nasty stuff hiding in the pivots and spacers. :ahhh
And here's some general advice to everyone: Don't even trust a new toothpick unless you have removed the scales and cleaned inside first.
-
'Course, I think I should correct myself. I kept saying Tradesman, but this is a Handyman. No pliers...
My bad...:D
-
Best I not bring up dead bugs, blood and hair then :D (yes all in the same knife).
-
I can cope with hair, bugs and budgie poo, but blood is just too much.
-
I've had a couple that have obviously been used for field dressing and then never cleaned.
-
Eeew!
-
Needless to say, I've become quite the master at SAK sterilisation and for that matter knowing when to give in and lob in the bin :)
-
I don't understand some of you. You buy USED SAK's then complain how the former owner treated it. If you want a nice knife buy a new one, or get a "gently used" one from Felinevet. Now of course if you bought it and it was advertised as "like new" condition and it isn't then I understand being mad. Granted we love these tools but they are that, tools. And sometimes situations pop up that you have to use your SAK in a way that it wasn't designed to do.
Myself, I generally try to take care of my knives but there have been instances where I've abused and broken SAK's. When I do that I don't send it back in for a warranty since I did abuse it.
Some of you are too sensitive. :D :D :D :D

-
Yeah, I've done some pretty mucky stuff with knives over the years, but somehow I always found the time to clean them afterwards. :)
-
Hey, I just like to b****! :D
Still, it amazes me that people don't take care of things. Granted, as I've said a 1000 times before, I can be a bit lackadaisical with tools and machinery, but I try not to be. I try to take care of stuff. I had it drummed into my head as a kid (by parents who came out of the Great Depression) that you take care of things. By God, you paid good money for that, so take care of it! Hell, I didn't pay very much for any of these SAKs, but I'm going to take care of all of them. Same with my MTs, which I do abuse the hell out of at times. I still clean them afterwards.
To get all serious for a moment, I just have very little patience for stupidity, and as far as I'm concerned anyone who treats a tool the way the previous owners of these SAKs did are...well, stupid. Sorry. But that's the way it is.
OK, seriousness over. (If I keep this up, I'll start telling stories about my gov't servitude a few years back. Talk about a primer on stupidity!! :D)
-
@jzmtl said:
Better pop off the scale and clean under it as well, I've read some, um interesting stories regard that.I recently won an auction for a really old Vic Ambassador (has the screw in the scissors).
It had a cracked scale on it so I bought a new set of scales from BenX and they arrived the other day.
I popped the scales off the SAK and holy crap, what a disgusting mess underneath.
Now I am wondering how to clean the other used SAKs I have bought without having to remove the old scales and buy new ones.
Is soaking the SAKs in hot water with some dish soap sufficient?
EDIT: I decided to take the scales off of a couple of the used ones I have. They weren't too bad underneath actually.
They are currently soaking in soapy hot water anyway.BTW, the blade on the Gerber Clutch works very well for removing the scales from (58mm) SAKs without damaging them.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login