Leatherman PST chronology project
-
@Charged said:
NEVER SEEN ANY PST LIKE THAT WITH SERRATED KNIFEthe serrated knife is clearly factory made, the serrations are different than PST II(way more aggressive and deep).
does some one have any info? how rare this is? or a link
It is quite obvious that both the serrator and the rest of the sharpening of the blade are homemade, perhaps with the use of special equipment, but this is not LM factory production.
-
here is the photos of the other side of the awl.
a bit different than my other Japanese pst. the plat part is large
-
Take this with a grain of salt, but I believe a previous owner tried to repair or modify the awl. The grinds look very uneven to me. Whatever the case, a very cool JPST!

-
@Charged said:
here is the photos of the other side of the awl.
a bit different than my other Japanese pst. the plat part is largeThis looks very interesting to me. From my experience in metalworking and manufacturing, this looks much more like a prototype than a modification. The nail nicks on the other tools are all large, like on the blade, and the hollow grinding on the back of the awl would be very difficult to produce without specialized equipment. The uneveness of the grind on the back of the awl would testify to the fact that this is a prototype, not part of a production run.
Very cool knife! It would be interesting to find out from someone at Leatherman if there are any records of such a prototype.
-
This is clearly a modification as stated by wowoboro. Leatherman, and especially Japanese craftsmanship, would be much higher in my opinion. This looks sloppy.
-
@Legend said:
This is clearly a modification as stated by wowoboro. Leatherman, and especially Japanese craftsmanship, would be much higher in my opinion. This looks sloppy.Agreed Sir, the work is sloppy by production standards. Your own impressive collection of PSTs and your cataloging of minute production differentiations in your book makes you an authority with extensive knowledge of the PST. However, I think you would agree that Tim Leatherman's own prototypes were quite sloppy by production standards. The low quality would indicate to me that this is either a prototype, or an early attempted counterfeit. I simply think the likelihood of a prototype is higher. Particularly with the Leatherman tang stamping, and the fact that the later production PST II did in fact have a combo blade. Just my thoughts of course.
-
Knurled screws
No lanyard attachment
Small diameter plier pivot
LEATHERMAN USA on plier pivot
No hard wire cutter notch
Handles stamped with small "LEATHERMAN TOOL/US PAT 4238862/PORTLAND OR" and "POCKET SURVIVAL TOOL"
Inch ruler only
No date codes
Saber point blade
Knife blade tang stamped LEATHERMAN U.S.A.
Screwdrivers pivot-in
Outie can opener
Also file tang has "JAPAN" stamped on it. Only visible when disassembled.So I think this is mid'ish 85 or a little earlier??? Pics below.
[attach id=0 msg=2569668]
[attach id=1 msg=2569668]
[attach id=2 msg=2569668]Two more pics to follow



-
[attach id=0 msg=2569669]
[attach id=1 msg=2569669]

-
This is a drop point blade, more likely a 1986. Great looking piece for sure..
-
Thanks! Knew I would get something confused.

-
Nice early example

-
-
Bravo 👏🏼
Absolutely incredible find. You never cease to amaze.
-
That is very awesome, congrats.

-
@wowaboro said:
Only today (after fifteen years of studying and collecting), I learned that the earliest date code on the handle is not 1192 (as was until now thought), but 1092. Once again I am convinced that PST is simply an endless history of discoveries :)
..
Need to make changes to the first post of the thread:o
Thanks W - I changed the text - But not the image .... Yet!
EDIT PS: Great to see you still posting W
- And collecting and analysing of course !! -
@wowaboro said:
Only today (after fifteen years of studying and collecting), I learned that the earliest date code on the handle is not 1192 (as was until now thought), but 1092. Once again I am convinced that PST is simply an endless history of discoveries :)
[attach id=0 msg=2583512]
Need to make changes to the first post of the threadVery cool


-
Hello, this PST that has the words EXTENDED POCKET SURVIVAL TOOL, JAPANESE RIVETS, AND JAPANESE PLIERS, in it, in your opinion was it reassembled or is it original? Thanks
[attach id=0 msg=2587767]
[attach id=1 msg=2587767]
[attach id=2 msg=2587767]


-
Ah... I just read through the timeline on the first page... sorry, I'm new to the forum. So, it seems the PST I posted photos of corresponds to this period:
3] Late 1985 – early 1989 Made in Japan concurrently.
• Riveted construction
• Hollow base rivets
• No lanyard attachment
• Small diameter plier pivot
• Staked plier pivot
• Only LEATHERMAN cast into plier pivot
• No hard wire cutter notch
• One handle stamped: LEATHERMAN TOOL, US PAT 4238862, PORTLAND OR
• Other handle stamped POCKET SURVIVAL TOOL
• Inch ruler only, no metric
• No date codes
(Note some Japan tools appear to have handles obtained from the same source as some USA tools)
• Drop point knife blade
• Knife tang stamped LEATHERMAN JAPAN
• Milled awl blade
• Off center screwdrivers pivot IN
• Can opener has left hand cutIt seems to me that everything matches up.
Do you think it's a rare piece? How much might it be worth? Thanks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


