Thoughts on the Reylight Pineapple Mini / comparison of v1 and v3
-
@Farmer X said:
And I won't hold a flashlight in my mouth anymore; I use a headlamp or free-standing work lights if I need to use both hands. I'll have to see what Reylight has in the way of single AA lights.
There is a lot to be said for not doing this. The thing is that to a lazy guy like me, not having to go and fetch a different light is part of the appeal of always having one in my pocket. So unless I know in advance I have to do something where I’ll need a hands free light, and bring one, I’ll just stick the damn thing in my mouth. It’s no good for more than a minute or two, but that covers most uses that come up. The most regular one is putting out the bins at night.
-
My Copper Pineapple feels very nice and sturdy in hand. Not sure it it's a 1, 2, or 3! It didn't come with any paperwork. Still figuring out the UI.

-
Ok, mine is a v2, forward clicker. I have one in the chamber and three spare 1440s, for other flashlights, and a tiny charger. Fortunately I kept them, even though I've largely gone over to using USB chargables. Charging used to be a pain, and all my old Eneloops are dead.
I normally carry two lights, and there are AAAs scattered everywhere, so a surprise blackout shouldn't be a thing. A very nice light, for allbthe reasons you mentioned.
-
@Jack the Zipper said:
My Copper Pineapple feels very nice and sturdy in hand. Not sure it it's a 1, 2, or 3! It didn't come with any paperwork. Still figuring out the UI.Lovely copper carry! Those are going to patina up nicely. I think I have the same pen as well but in titanium - Big I Design mini pen.
Out of interest , how much does the copper version of the light weigh with battery in?
-
@fullbreakfast said:
Lovely copper carry! Those are going to patina up nicely.Out of interest , how much does the copper version of the light weigh with battery in?
I don't have a suitable scale but the Internet says 52 grams (1,8 freedom ounces), which could be without the battery. It's heavy for the size, being copper, but that's part of the charm.
As for Eneloops, I had a bunch for some walkie talkies ca 2013, and they were in heavy use. They started to charge slower and slower and then not at all. I just gave up on them, didn't need the walkie talkies anymore. Later I tried charging them but they just died. Maybe it was my charger, I don't know. I've been using lithium primaries in my flashlights ever since, until easy USB charging became the norm. Now I have a one-cell mini charger for AAA-sized batteries just in case, and for the Reylight, of course.
-
@Jack the Zipper said:
I don't have a suitable scale but the Internet says 52 grams (1,8 freedom ounces), which could be without the battery. It's heavy for the size, being copper, but that's part of the charm.Yeah, I used to have an Olight i3T in steel that was very heavy for a AAA light, but I did enjoy the weight of it in the hand. Unfortunately the clicky button failed after only six months, so it was a poor buy.
@Jack the Zipper said:
As for Eneloops, I had a bunch for some walkie talkies ca 2013, and they were in heavy use. They started to charge slower and slower and then not at all. I just gave up on them, didn't need the walkie talkies anymore. Later I tried charging them but they just died. Maybe it was my charger, I don't know. I've been using lithium primaries in my flashlights ever since, until easy USB charging became the norm. Now I have a one-cell mini charger for AAA-sized batteries just in case, and for the Reylight, of course.Thanks for the notes. Most of the ones I have are not in such heavy use, so far all are fine.
I keep thinking to get a single-cell AAA charger, so I can take it with me when travelling and use my Reylight. At the moment to avoid the bother of carrying spare batteries I usually take a USB-C light (Rovyvon A8) when travelling instead. Arguably carrying a mini charger is more fuss than carrying the spares, but somehow I would feel better being able to charge.
-
Well, there you have it, the ultimate EDC conundrum. Do you Carry your best and dearest Every Day, or do you pick cheap & easy for travel, etc. If I fly, I don't bring my nice stuff - it's a gamble. A fully innocuous (steel) pen and (2xAA) flashlight combo baffled an airport security person so that I was sure he would confiscate them. And what about hotels, I've had a few items pinched by cleaning staff, including Photon Light, Bullet Pen, a Gerber folder... So yeah, cheap lights only when not in the daily routine. No extra gadgets to worry about. Olight i3E goes for 6-7 Euros so that's what I have in my travel kit. For a short trip there's no need for spare batteries.
At home, tinkering with your fav toys is pure pleasure :D
-
An everyday tale of EDC foolishness:
Having written the opus above about my Mk.1 RPM, and even fondly imagined my son carrying it after I was dead, I lost it on 16 January this year. Not mislaid it around the house, permanently lost it. We’d been in London for the day and I’d had it clipped into my jeans pocket as usual. After we got home I realised with a pang that it was no longer there. It wasn’t in any of my pockets, it wasn’t in the car, it wasn’t anywhere. And I recalled the sensation of something having come out of my pocket when I pulled my wallet out to pay for our parking at the machine. I was in a hurry as we were late, and it was dark, and I thought it was a receipt or other bit of litter. By the time I’d finished paying I’d already forgotten about it and left without another thought.
I can’t say I shed bitter tears, but I was quite annoyed as I’d become attached to the thing, having carried it daily for several years. It kept bothering me. I had my spare Mk 3 with the frag pattern to carry, but it wasn’t really the same. I even went back to the place where the car park was the next time I was in London to see if it had been handed in as lost property. It hadn’t, of course. So that was that.
Several weeks later I was still sore about it. And then I noticed Reylight were having a sale. So of course I bought another Mk 3, with the seigaiha pattern on it like the one I had lost. I also ordered a spare steel clip, like the one on my lost light, to swap out for the big titanium clip the new one came with. Only when it came, I didn’t like it with steel clip, as you could see one of the screw holes from the titanium clip. And also the new steel clip wasn’t quite the same as the old one and didn’t feel quite right. So I put the titanium clip on it again and carried it like that. After a few weeks I started to like it. But still not as much as the one I lost. Tough life.
Then last week my wife found the lost forever Mk 1 seigaiha at the bottom of the handbag she’d been carrying on 16 January. I must have given it to her to use for something and we had both forgotten this.
-
So:

Carrying the OG again, and very pleased to have it. Though sometimes I carry a pair of them, just for fun.
-
Glad the missing light turned up. It’s always annoying to lose things; even more so when they aren’t easily replaced exactly in kind.
-
I am very surprised to read this.
I recently got a Reylight Pineapple Mini Mk 3 and I am as unimpressed with it as I could possibly be.
I got the cheesy green one in aluminum and honestly, I haven't seen a flashlight emit so little light since the good old days of the incandescent Mag Solitaire. I have dollar store lights that cost a lot less than this one, and and a heck of a lot brighter. I have never seen an LED light emit such a pathetic and small amount of light.
I thought it might have been the battery, so I replaced it and there was no difference.
I was going to do a beam shot comparison with the dimmest light I have, the ring light on the LoopDot, and the Pineapple was completely washed out by it.
I haven't tried them side by side, but I don't know that it's much brighter than the light on my G-Shock- and that's not an exaggeration.
Maybe I got a bad one?

When I spoke to Reylight about it they didn't seem concerned about the lack of light coming out of it which lead me to think this was normal.
For $35 I have quite a few suggestions of lights I'd rather have than this one.
Def
-
@Grant Lamontagne said:
I recently got a Reylight Pineapple Mini Mk 3 and I am as unimpressed with it as I could possibly be.I’ve eyed them up, but haven’t pulled the trigger.
While I think they are cool looking, I’m incredibly leery of any flashlight manufacturer who doesn’t post the objective performance specs of their lights on their website.
-
I did a comparison after making my post last night.
While it doesn't have much throw, info believe the light on my G Shock is brighter than this light.
I did notice one thing I liked about this light- there is a small glowing o ring just under the lens. It was so faint I barely noticed it, but after charging it with a brighter light it was unmistakable.
Def
-
@Grant Lamontagne said:
I am very surprised to read this.I recently got a Reylight Pineapple Mini Mk 3 and I am as unimpressed with it as I could possibly be.
I got the cheesy green one in aluminum and honestly, I haven't seen a flashlight emit so little light since the good old days of the incandescent Mag Solitaire. I have dollar store lights that cost a lot less than this one, and and a heck of a lot brighter. I have never seen an LED light emit such a pathetic and small amount of light.
I thought it might have been the battery, so I replaced it and there was no difference.
I was going to do a beam shot comparison with the dimmest light I have, the ring light on the LoopDot, and the Pineapple was completely washed out by it.
I haven't tried them side by side, but I don't know that it's much brighter than the light on my G-Shock- and that's not an exaggeration.
Maybe I got a bad one?

When I spoke to Reylight about it they didn't seem concerned about the lack of light coming out of it which lead me to think this was normal.
For $35 I have quite a few suggestions of lights I'd rather have than this one.
Def
I just want to check that you are aware of how to increase the light level by making a half-press on the button? From factory there are four levels, and it will come on at the lowest level which is basically moonlight. You then cycle through the levels with half-presses. It soon becomes intuitive. Sounds like you may not have got above the moonlight level.
You can also programme in different options, using instructions linked to on the Reylight web site, though for me the factory settings are fine.
Noting, whilst you should be able to get a good light using regular disposable batteries, you will get a lot better output with lithium rechargeables.
-
It is at home and I am not until the end of the month, but I will be sure to try this as soon as I can.
My version of this light did not come with instructions or anything, and I didn't mage to find a way to alter the settings. I will experiment more. If there are better settings that actually produce light I will definitely update my opinion of it. But, it is going to have to really impress me if they want me to actually like it. I've said it before and I'll say it again- if you can't put a flashlight in someone's hands and they can't immediately make a useable amount of light come out the end of it then that's a problem.
And, while I am not a flashlight guy, I have had dozens of lights over the years and if I couldn't figure it out, I am still going to call it a fail. Just maybe not as big a fail as I thought.
Def
-
@fullbreakfast said:
You then cycle through the levels with half-presses.I think I have a couple lights that operate this way.
I agree with Def that it isn’t the most intuitive option, but I suppose it’s all what you get used to.
-
@nate j said:
I think I have a couple lights that operate this way.I agree with Def that it isn’t the most intuitive option, but I suppose it’s all what you get used to.
It’s fairly common I think. If you want to have a flashlight that operates with just one button - which is good for me, KISS! - but has several light levels there’s only a few options. Of those this (reverse clicky) is the one I prefer. But others will differ of course.
-
I also have several lights that do that and I did try pressing the button partway and it didn't seem to make a difference. Perhaps I pressed not halfway enough or too halfway?

Either way, I am all about giving a product it's due and if I screwed up then I screwed up. It wouldn't be the first time and I doubt very much it will be the last.
That having been said, I stand by my statement of if someone can't make light come out the end it's a problem, and if someone like me, who has had his share of flashlights can't make a useable amount of light come out then I have serious doubts about it.
Def
-
@fullbreakfast said:
It’s fairly common I think. If you want to have a flashlight that operates with just one button - which is good for me, KISS! - but has several light levels there’s only a few options. Of those this (reverse clicky) is the one I prefer. But others will differ of course.I’d argue that, while one-button (or twist or rotary switch only with no buttons) looks cleanest and simplest, two-button is actually the easiest and most intuitive UI for a multi-mode flashlight.
On the best of the two-button lights I have, the tail switch turns the light on/off, and maybe has a momentary on function. When the light is on, the side switch cycles through modes. The light has mode memory, so if you’re using the same mode repeatedly, you don’t have to cycle through modes every time. That really covers the basic operations, with the exception of things like “hidden” and programming modes. These are lights I can easily hand to a child (or someone else with only a basic knowledge of flashlights), and they can turn the light on, use it for what they need, and turn it off, without needing instruction. (This is especially true if I’m able to pre-select a suitable output level for them, usually medium or low.)
In contrast, single-button multi-mode lights often have more complex control sequences…
- full press vs. half press
- short/quick press vs. long press
- press and hold; pressing and holding for different lengths of time may yield different results, e.g. “hold for more than 0.5 but less than 1.5 seconds to…”
- single press vs. double press vs. triple press
- etc.
Of the single-button/single-switch multi-mode lights I’ve had, I think the following were the most intuitive to use (in no particular order):
-
Rotary switch is dead simple to use. Just rotate it to the desired output; repeat as needed. Rotate to off position when done. The big disadvantages of this are (1) unless you just happened to want the mode right next to “off”, you were cycling through multiple modes every time, both when turning the light on and when turning it off; (2) while it was possible to operate the rotary switch with one hand, doing so was a bit fiddly/tricky, and 2H operation was much preferred.
-
Quick press to turn on/off; press and hold to cycle through modes. Biggest problem with this light was accidental/inadvertent activation, but that could have been mitigated with a better quality/designed switch IMO.
-
Long press to turn on/off; quick press to cycle through modes. Maybe the best of the one-button options. But as silly as it may sound, that short on/off delay got annoying.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login