Giants of June / Big Blades Challenge - June 2026
-
They are heavy. By the way, I already have the badge for the challenge, so I will likely request either the folding hunter badge or the CASE badge. Assuming I can complete the challenge.
I'm not sure whether or not the (much) cheaper version of the CASE 6265 type have 4 inch blades or not. Things like the Marbles or Rough Ryder. That might be worth checking out for the members who are thinking about carrying a big folding hunter but don't want to drop a C-note on one. Or whatever they cost now.
Best wishes. G

-
@IMR4198 said:
I'm not sure whether or not the (much) cheaper version of the CASE 6265 type have 4 inch blades or not. Things like the Marbles or Rough Ryder. That might be worth checking out for the members who are thinking about carrying a big folding hunter but don't want to drop a C-note on one. Or whatever they cost now.A lot of the imitators are a little shorter for some reason. Since a real 65 pattern is right at 4”, many (not necessarily all) of those are too short for this challenge.
The cheapest new 65 pattern I’ve seen lately was about $80. Most up over $100 now though.
The RR Deer Slayer I posted earlier isn’t a Folding Hunter; I’d call it a Clasp Knife, probably a copy of the old Case 72 pattern. It’s cleanly over 4” though, and for the budget-minded, it’s a steal for $15. I could change my mind, but I’m hoping to put mine through its paces during some combination of this challenge & the Dean51 trad challenge. Also pretty sure I have an actual 72 pattern around here somewhere; I’ll have to try to locate it.
-
I seem to remember that RR clasp knife. Should make a worthy folder for the challenge. Best wishes. G

-
I’m sure I’ll show, carry, and use some other knives during the challenge as well.
But that big RR meets the criteria for both this Giants of June challenge and the Dean51 trad challenge, and seems like just the thing to take camping with the scouts. For $15, I can loan it out without worrying about what hateful things might be done to it, and if it ends up at the bottom of the lake or otherwise has to be replaced, no big deal.
Top: the aforementioned RR
Bottom: Case 72 pattern Clasp Knife


-
@IMR4198 said:
I remember reading of an old mountain lion hunter that kept a pack of hounds to find the critters and keep them at bay. He carried a little sawed off 22 rifle and kept a two blade large folding hunter very much like yours (and mine). He said that he peeled spuds with one blade and lions with the other.
Best wishes. G


@IMR4198 said:
They are heavy. By the way, I already have the badge for the challenge, so I will likely request either the folding hunter badge or the CASE badge. Assuming I can complete the challenge.
I'm not sure whether or not the (much) cheaper version of the CASE 6265 type have 4 inch blades or not. Things like the Marbles or Rough Ryder. That might be worth checking out for the members who are thinking about carrying a big folding hunter but don't want to drop a C-note on one. Or whatever they cost now.
Best wishes. G

The Old Timer 25OT doesn't make the cut. Closed length is the same as a Case 65, but the blades are under 4 inches. At least my old one is, and I doubt that has changed.
@nate j said:
I’m sure I’ll show, carry, and use some other knives during the challenge as well.But that big RR meets the criteria for both this Giants of June challenge and the Dean51 trad challenge, and seems like just the thing to take camping with the scouts. For $15, I can loan it out without worrying about what hateful things might be done to it, and if it ends up at the bottom of the lake or otherwise has to be replaced, no big deal.
Top: the aforementioned RR
Bottom: Case 72 pattern Clasp Knife
Those are a couple of good looking knives! I was thinking, "I need to get one of those 72 pattern Case knives." Then I remembered that I already have one! Inherited from my Dad.

-
@WECSOG said:
Those are a couple of good looking knives! I was thinking, "I need to get one of those 72 pattern Case knives." Then I remembered that I already have one! Inherited from my Dad.
Wes!That’s a great older 72 pattern, and even better that it was your father’s. What’s the engraving on the blade? I can’t quite make it out in the pic.
-
I said earlier that I would decide about participating as June got closer. So, I am in. I do have the CASE folding hunter. Is this the current sign up roster, or did I miss someone? Best wishes. Gary
- nate J
- WECSOG
- IMR4198

-
@IMR4198 said:
I said earlier that I would decide about participating as June got closer. So, I am in. I do have the CASE folding hunter. Is this the current sign up roster, or did I miss someone? Best wishes. Gary- nate J
- WECSOG
- IMR4198

That’s the current list.
FX talked about joining, but I think he’s been pretty busy IRL and haven’t seen him around here much.
Old Lefty said he would join if his image posting issues got sorted out, but no further word on that.
I’m still hoping for a few more, but we’ll have some fun regardless. (Which of course is the entire point.). Perhaps we can be the three musketeers. We’ll even have “swords”.
:D -
@nate j said:
That’s the current list.FX talked about joining, but I think he’s been pretty busy IRL and haven’t seen him around here much.
Old Lefty said he would join if his image posting issues got sorted out, but no further word on that.
I’m still hoping for a few more, but we’ll have some fun regardless. (Which of course is the entire point.). Perhaps we can be the three musketeers. We’ll even have “swords”.
:DWe might even be able to remove the quotes around that word. There's a minimum blade length of 4 inches, but no maximum. Right?

-
Probably in, but not sure what I'll carry. We had a lot of fun with the Case hunter last year, and I don't have the non-Buck hunter badge yet, so that could work.
Or...
-
@BPRoberts said:
Probably in, but not sure what I'll carry. We had a lot of fun with the Case hunter last year, and I don't have the non-Buck hunter badge yet, so that could work.Or...
Excellent!
Case FH is a solid choice, in more ways than one.
I have to hand it to Roxon. If the options are go big or go home, they definitely went big. Though at 11” closed and more than 18 oz, it’s not something I would want to carry around.
If you fancy something new for not terribly much money, see my earlier post in this thread and consider a Cold Steel Kudu Lite, RR Deer Slayer, or Opinel No. 12.
-
I'm struggling to find a larg folder that won't break the bank but I have several big fixies I can play with. I'm in.
- nate J
- WECSOG
- IMR4198
- AzteCypher
-
I went looking for the RR, but the one I want (yellow synthetic scales and T10 carbon steel) is out of stock everywhere. Oh well; I have more than enough choices. Especially if I mix in some fixies, which I'm planning to do.
-
@AzteCypher said:
I'm struggling to find a larg folder that won't break the bank but I have several big fixies I can play with. I'm in.- nate J
- WECSOG
- IMR4198
- AzteCypher

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
