Favourite EDC Multitool
-
Other, I alternate a lot, but mostly it's my SwissChamp. Actually the tool I technically carry most is my SwissCard light, because it's in my wallet, and it can go slightly more unnoticed than a SAK or other multi-tool on my belt, so I can carry it places where knives are frowned upon. Be prepared at all times!
-
Gerber Clutch, because it's compact and light enough for me to pocket carry.
Also, a Vic Tinker has been carried every day since some point in the early 1980s.
Before the Tinker, I carried various Case and Camillus versions of Army and Boy Scout knives.
.
-
My favorite EDC multitool is my Spirit (and I voted that way), but lately I have been carrying the Leatherman Juice CS4 that Def was kind enough to send me throught the EDC exchange. It is a very impressive tool. It has pretty much everything you would need to use. Thanks again Def!
-
Always my Xti, followed by my Spirit and PPPD
As for the Zilla, I think it's growing on me, it's just a matter of carrying the monster.
David
-
Leatherman Core, which I consider an evolution of the original Super Tool, my previous favorite. That was the one that sold me on pliers based multi-tools.
Prior to that, my only EDC for years had been a Swisschamp, a versatile and highly useable item, but the bullet proof Leatherman with its good size pliers, locking blades and square edged drivers was a "real" tool. I got one and never regretted it, except...from the first time I started toting Leathermen (1996), I missed the SAK. When I carry my Swisschamp, I miss the Core. That has continued to this moment.
-
Well I'm gona be awkward (how unlike me ;D) I've got 3 distinct EDC's so here goes...
-
Home and general out and aboutiness, Swisstool X and Leatherman micra on my keyring :)
-
Work, Spirit (the one with the personally annoying combo blade ::)) and a Wenger Patriot/Eloxi on my keyring
-
Wood's, Vic Farmer, which to my mind is just about the perfect woodsman's folder :)
-
-
@Defender said:
When the SwissTool hit the market it really did turn the multitool industry on it's ear. I don't think any one tool has made that big an impact on the market since the original PST jump started the industry in '83...I might agree with this, but only talking about the knife-enthusiast market (but even within that market, the wave/charge models have made quite a mark). Do you really think it's had that big of an impact on the multi-tool industry as a whole? (USA at least, I can't speak for elswhere) I'd say that the micra might have been the second-most important design since the PST. What do you think?
-
I carry a Leatherman Charge XTi on my laptop bag's strap. As a system administrator and general IT engineer at a telecom company who frequently finds himself in the field, it's nice to have a wide range of tools available in a single device. Since I've already got to lug around the laptop, GPS, camera, and assorted cables and power supplies, I can get away with toting it around in the leather case along with the bit kit, then going to the pocket clip once I've set up on-site. A full-sized serrated secondary blade with quality steel means I don't have to ruin the edge on my clip point just to cut cardboard on the next set of 100 Dell boxes. The interchangeable bits allow me to handle everything from mobo to rack size screws, along with the occasional Torx and Robertson that some vendors seem to delight in throwing at us. It's durable as all hell, the pliers in particular stand up to considerable use and abuse. The primary blades are one-hand deployable, at least for us righties... Steel selections for the blades and tools are all top notch and dictated by function, from the titanium to hardened tool steel drivers to the primary blade made from uber-quality 154CM, though I'd prefer S30V personally. (Does anyone know a good source for TTi blades...?)
At home, I keep an original Wave around mostly for sentimental reasons, a gift from a departed friend. It's still a handy device, though it shows it's first generation nature and it's not really sufficient for an "around the house" tool, if for no other reason than the lack of a corkscrew.
-
-
I voted for the swisstool. Only 3 others have. Can I get a re-count? There are soem really sick people out there.
-
I voted LM. I carried an original supertool for years, and now that I'm indoors more, I carry a kick on a pocket clip paired with a wenger SI I've carried for years. This combo seems to work pretty well...the pliers and phillips driver on the kick mesh well with the bottle opener/driver and the awl(yep, I use it pretty often) of the SAK. Plus I can keep the SI in my pocket when I've got to get all dressed up for whatever reason and still have a basic set of tools on me.
And when I do have to go out "into the cuds" so to speak, the supertool is still my choice and I've had it for going on 10 years!
-
My EDC is pure Victorinox :ahhh Always a swisstool on a belt sheath with a swisschamp at work and a spirit in my bag as back up , at home its the Swisstool with another SAK ( either a Skipper , climber or soldier ) . The only exception is the Spyderco atlantic salt which goes in the sea with me , the ST still with me then aswell ;)
dunc
-
I don't undertand why there is 2 catagorys for the Vic multis and only one for the LM?
LM has a jillion models and they are all combined on this survey. Why not with the Vic ? Vic is the favorite here if you combine the total votes.
-
@colubrid said:
I don't undertand why there is 2 catagorys for the Vic multis and only one for the LM?LM has a jillion models and they are all combined on this survey. Why not with the Vic ? Vic is the favorite here if you combine the total votes.
I think the original poster (Tab) was looking for opinions before buying, and was leaning toward Vic, so splitting it up let him know which of the two was the favorite. Of course, Tab can chime in and correct me if I'm wrong :)
-
OOh okay!
-
I guess that poll says it all. Victorinox is the favorite at least here it is.
Dont get me wrong though, if I only enjoyed the company of one single solitary multitool I probaly would not be a multitool.org member. There are other tools that I like. I just like the swisstool better than most overall. The ideal multitool would combine the best features of a variety of multitools. However, the one thing that I believe that none of us here would all agree upon is size. We all have different needs and carry differently under different circumstances.
-
I agree, variety is good. Competition is good for the consumer (us)! I doubt the Swisstools would have ever existed without competition from LM, Gerber, SOG, etc. It forces companies to make good products at reasonable prices, so I'm all for it!
-
It seems like the SwissTool is a really popular model around here...as someone who hasn't had the chance to use one, I've gotta ask: what, in your opinion, makes the SwissTool superior to the others on the market?
-
The SwissTool has a number of superior features, but I don't think it is necessarily superior overall. It's certainly one of the top 5 tools, but it's not perfect, or at least not for me. Others here may have different ideas!
What really shines about the SwissTool over many others on the market are:
All locking implements
Extremely rust/corrosion resistant
Outside access to the tools (don't need to open pliers to get at them)
Fit and finish are absolute top notch, and unparalleled by any other manufacturer
Cost is lower an number of functions is higher than mostAll that conspires to make the SwissTool a very tough customer to beat. Of course there are some drawbacks to the design as well, although personally they don't bother me much, but they are discussed enough here that I am certain they are valid:
Screwdrivers are highly polished, and therefore "slippy"
Screwdrivers (for the most part) have other implements on them (like the bottle opener) which makes them useless for recessed screws
Bulky and heavy (of course the SwissTool Spirit is an excellent alternative)It really all boils down to what is important to you. For me, I like a tool that is dependable above all else (most tools from major manufacturers are dependable), have all locking implements (as two stitches in my middle finger will attest, the double folding handle thing doesn't work), have as many functions (or more accurately, as much adaptability to any situation) as possible, and require as little maintenance as possible because I am lazy. The SwissTool falls securely into those categories and therefore is, and always will be, one of my favorite tools.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login