NKD: OutdoorMechanic and CyberExplorer (Image heavy)
-
Wow! That are two beautiful SAKs!
-

Those are great mods! I'm impressed with your creativity on both the knives and the pouch. -
Nice work!
-
Great mods, cool solution in the pouch.
I love seeing such great stuff. Thanks for showing it here. -
Excellent!
-
So I did some "real world" testing and the pouch failed... in two different ways. :D
First, I went for a walk with my wife and not even 5 minutes into the walk and the "rivets" on the belt clip fell off. Apparently I'm also bad at getting those properly put on. Totally a failure on my part. And easy enough to fix. I just put some real rivets on it when I got back home.
Second, it's WAY to thick for everyday use. Sticks out way to far from my hip to be comfortable when walking around or sitting in a chair. I think I have a solution for this as well. The pouch is, more or less, formless. The original insert I designed was to fit the 'default' shape of the pouch, but there's no reason I can't play around with that a bit. My going wider with my insert it pushes out the sides and thus reduces the thickness. So my new insert is 75mm wide by 32mm vs. the old which was 60x46.
The downside here is that I can only fit my pen and a very small open slot for other things vs. the old design which had room for my pen, flashlight, and a bigger slot for other things.
However, literally as I was opening up my old 3D design to get the measurements to put them here I had an idea that I might need to explore tonight that might let me add the flashlight back in... maybe.
-
Very cool and great work!

-
Okay, so my new I idea I had while typing out the old message ended up being a GREAT SUCCESS!

The top layout here in the new design while the bottom one is old layout. I know it might be hard to see some of the numbers or make out exactly what's going on here, but the import parts are these:
The old layout was 60mm wide and 46mm thick. That means it stuck out 46mm from my hip. (For my fellow Americans that 1.8 inches... at least when it comes to designing I mostly think in metric these days.) While the design worked great and allowed me a very nice pocket tray of about 32x14x90 mm for storing things, it just stuck out from my hip WAY too much. I was constantly bumping it with my arms and it got in the way when sitting down into chairs or my car.
So I resigned with with a wider and narrower plan with the knives on the outside and some space in the middle for a space pen and a smaller tray. This worked, but I noticed when putting it in my pouch there was extra space on the outside edges. Not enough to go wider with my rectangle, but still usable space... so I redesigned again with the knife pockets on the inside... originally I centered the knife pockets, but realized I'd make better use of space is they where off centered... so that's my final design result. This design is much wider... 89mm, but very nearly 1/3 less thick, only 31 mm thick. That makes a HUGE difference for me!
Now I have room for my maglite solitaire, space pen, and a small ferro rod on the left, two SAKs in the middle, and then a small circular tray on the right for needles, safety pins, thread, and maybe a few other small things. The tray is much smaller (only about a half circle of around 14mm diameter), but it still works for a few things.
-
@psyjohn said:

Those are great mods! I'm impressed with your creativity on both the knives and the pouch.
.... and thanks for sharing - Really amazing work.I had never thought about the complimentary SAK carry before - Apart from the obvious 91mm + 58mm combo!
It's a great idea - But only truly works well, with few overlaps, when you do mods like you have done
As pretty much every SAK has the basic 6 tools of the Spartan and nearly every SAK larger than 2 layers already has the scissors (or possibly the saw) - or even both when you go above four layersSo I really like this idea and what you did -
... It got me thinking!!! 
-
@Huntsman said:
It's a great idea - But only truly works well, with few overlaps, when you do mods like you have doneExactly. I thought about in the past carrying to knives but there was just way too much overlap. Even if we went strictly with Bit Driver in one, Pliers in the other the smallest you get would be the CyberTool S and maybe the Deluxe Tinker. And even here we're still duplicating the Reamer, Main Blade, Small Blade, Can Opener, Cap Lifter.
I really wanted to minimize the overlap while maximizing tool options. 10 years ago I never would have tried something like this... I've never considered myself terribly handy. But these days... I guess I'm just more willing to try AND accept that even if my results are only 85-90% as good as a "professional's" results might be, it's still going to be plenty good enough.
So I really like this idea and what you did -
... It got me thinking!!! 
Ooooh... now you've got me curious. I mean obviously my tool choice is very specific to me personally... that's the whole point of a personal, right? But what other companion tool layouts could work well together?
Maybe someone will build two companion 111mm, one with the Fondue Fork and the other with a serrated blade to make it easy to eat steak at a camp site? :D
-
This is very cool. Thanks for sharing!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

