“Choose Your Own Challenge - June 2026
-
- Sos24 - Magnifying Glass
- Echotech - The Pioneer X Challenge
- Antti Lammi - Rebar challenge
- MTSAK - To Be Determined...
- LoopCutter - LM Signal 30 day Challenge
6.cody6268--LM Raptor. I'll be using a no-name knockoff for the first few days, but I've got a Raptor Response in the mail. May morph into a bit of a bladeless challenge, as my Swiss Tech Mariner can do most of the non-cutting chores. - Crunchie64 - got to be the Crunch 30 Day for me!
- Fireman-30 Day Surge
-
<u>DAY 1</u> Better late than never, right? I told IMR that I got a little fried from trying to do 12 challenges in a year. I fell short, but I'm Surging back!
Get ready for 30 days of power Surge and nanadance emojis![attach id=0 msg=2574858]

-
<u>Day One</u>
Starting the month with a pocket dump.
I think most of this stuff will stay the same, possibly with a small one hand opening folder some days.
[attach id=0 msg=2574860]

-
Ooh, Micra and a Crunch.

-
Day 1 of 30
Today used small screwdriver to tighten glasses screws.
[attach id=0 msg=2574864]

-
Day 1, me and a SIGNAL!
As a group challenge observer I became intrigued but not convinced a SIGNAL was in my future. Then a member, one I respect greatly, began a SOLO CHALLENGE with his SIGNAL, a AQUA color w/BO Tools. A model no longer available new!
I during that challenge became obsessed with the tool and the COLOR. So much so, when on vacation I only focused on the many styles of bikinis in the AQUA Color. 😳
Finally I caved, the online search of an auction site was tempting, then one day a used model appeared just like BARRY’s. A ‘make an offer’ option was made, Score!
This is my first, just like my hero’s. A just retired Patrol officer who I respected for years on this site, a friend.

My first;
[attach id=0 msg=2574874]
[attach id=1 msg=2574874]
[attach id=2 msg=2574874]A warning, this was my first, my obsession was to continue, with this thread I will share my journey…



-
Off to a great start

Three excellent LM’s
I don’t have either the Signal or Crunch, have to say I’m also really tempted by the aqua Signal. Tbh if Australia didn’t have such restrictive carrying laws I’d have one by now
-
@Fireman said:
<u>DAY 1</u> Better late than never, right? I told IMR that I got a little fried from trying to do 12 challenges in a year. I fell short, but I'm Surging back!
Get ready for 30 days of power Surge and nanadance emojis![attach id=0 msg=2574858]
Welcome
@LoopCutter said:
Day 1, me and a SIGNAL!As a group challenge observer I became intrigued but not convinced a SIGNAL was in my future. Then a member, one I respect greatly, began a SOLO CHALLENGE with his SIGNAL, a AQUA color w/BO Tools. A model no longer available new!
I during that challenge became obsessed with the tool and the COLOR. So much so, when on vacation I only focused on the many styles of bikinis in the AQUA Color. 😳
Finally I caved, the online search of an auction site was tempting, then one day a used model appeared just like BARRY’s. A ‘make an offer’ option was made, Score!
This is my first, just like my hero’s. A just retired Patrol officer who I respected for years on this site, a friend.

My first;
[attach id=0 msg=2574874]
[attach id=1 msg=2574874]
[attach id=2 msg=2574874]A warning, this was my first, my obsession was to continue, with this thread I will share my journey…
Nice Signal
@Antti Lammi said:
Day 1 of 30Today used small screwdriver to tighten glasses screws.
[attach id=0 msg=2574864]
Interesting mod
@Crunchie64 said:
<u>Day One</u>Starting the month with a pocket dump.
I think most of this stuff will stay the same, possibly with a small one hand opening folder some days.
[attach id=0 msg=2574860]
Looking good.
-
I decided to go with my Rebar for the challenge. If there was a badge for my Charge TTi, I'd have used it but I love my Rebar all the same!
Day 1:
It's been raining for a few days straight. We desperately needed it. I was supposed to start my summer job spraying weeds for the county I live in but we got called off today and tomorrow so far. So today, my Rebar stayed tucked away in its cozy little hand-sewn sleeping bag.
[attach id=0 msg=2574929]
-
Day 1
Used the magnifying glass to read the ingredients of my water. Now I’m reminded why I aways drink water I filter myself.
-
Day 01 Leatherman Mini Tool Challenge.
I have apparently completed 61 challenges. Yay me! There is still a long list of what I haven't done, so it was hard to decide what to do. Finally landed on the Mini Tool Challenge.


-
Day 1:
Light cutting chores. First of all, I had a few jobs needing a point--glass breaker failed miserably at that. SEcondly, the Raptor knockoffs are well known to have dull strap cutters (mine I put a crude edge on with a diamond needle file) that don't lock, but mine at least got film off some stuff today. Shears did the job well where possible.
Walmart has been getting a lot of Blokees stuff lately--they've been getting much the same licenses as Hasbro and Mattel (Star Wars, Marvel, DC, and Jurassic Park); and mostly making figures and such that are kits. Great for the price too. These were like $3 each.
The Raptor (coincidence NOT intended--these are blind box) is fully articulated (its extras combine to make a Pterodactyl skeleton), and the Triceratops skull can be combined with "extras" from other kits to build a full skeleton. The park gate--last time I was at Five Below, they had the Jada Nano Hollywood Rides Jurassic Park set that included the helicopter, Wrangler, and Explorer--which should scale properly to it.
[attach id=0 msg=2574933]

-
Day 2
I hope VIC do more of these special alox runs, this and the cadet from a few years later are real beauties


-
@MTSAK said:
I decided to go with my Rebar for the challenge. If there was a badge for my Charge TTi, I'd have used it but I love my Rebar all the same!Day 1:
It's been raining for a few days straight. We desperately needed it. I was supposed to start my summer job spraying weeds for the county I live in but we got called off today and tomorrow so far. So today, my Rebar stayed tucked away in its cozy little hand-sewn sleeping bag.
[attach id=0 msg=2574929]The Rebar is nice.
But just so you know if you do want to do a Challenge with the Charge, there is the The MIDLMAN Challenge, which includes blast, wave or charge. If you want to change, you can just start a day late and go an extra day. -
I hope VIC do more of these special alox runs, this and the cadet from a few years later are real beauties
That is a beauty.
Light cutting chores. First of all, I had a few jobs needing a point--glass breaker failed miserably at that. SEcondly, the Raptor knockoffs are well known to have dull strap cutters (mine I put a crude edge on with a diamond needle file) that don't lock, but mine at least got film off some stuff today. Shears did the job well where possible.
Walmart has been getting a lot of Blokees stuff lately--they've been getting much the same licenses as Hasbro and Mattel (Star Wars, Marvel, DC, and Jurassic Park); and mostly making figures and such that are kits. Great for the price too. These were like $3 each.
The Raptor (coincidence NOT intended--these are blind box) is fully articulated (its extras combine to make a Pterodactyl skeleton), and the Triceratops skull can be combined with "extras" from other kits to build a full skeleton. The park gate--last time I was at Five Below, they had the Jada Nano Hollywood Rides Jurassic Park set that included the helicopter, Wrangler, and Explorer--which should scale properly to it.
[attach id=0 msg=2574933]
Five Below is a nice store for finding unique items
@Alan K. said:
Day 01 Leatherman Mini Tool Challenge.I have apparently completed 61 challenges. Yay me! There is still a long list of what I haven't done, so it was hard to decide what to do. Finally landed on the Mini Tool Challenge.

61 is a lot, it is surprising how many there are.
-
Day 2 of 30
Today Rebar helped me to tighten door hinges what were bit loose.
[attach id=0 msg=2574949]

-
<u>DAY 2</u> Surge and some new plants. I was not able to use the Surge to install a new door lock. The driver bit was too short, so I got my extension and a long hex bit. The bit diameter was too large, so I had to use screwdrivers. :(
[attach id=0 msg=2574968]

-
Like your picture! The SURGE is standing tall in the green.
My experience has always been to best use the correct tool for the task. The bits are a great backup, yet if the actual tool is available, use it, saves headaches later.
-
@Sos24 said:
The Rebar is nice.
But just so you know if you do want to do a Challenge with the Charge, there is the The MIDLMAN Challenge, which includes blast, wave or charge. If you want to change, you can just start a day late and go an extra day.I don't know how I missed that! I even have all of the challenges printed off and I flipped through multiple times last night looking. I did think it was odd there wasn't a challenge including the Charge. I'll just stick with my Rebar and maybe switch up to the Charge for next month's challenge. Thanks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
