“Choose Your Own Challenge - June 2026
-
that version! Very nice! -
SIGNAL bonus!
I have some strange behavior being observed last couple days.
I have BLUE Bird nesting boxes (2) at the back of my property. The EASTERN BLUE BIRDS only use the south one, so I allow SPARROWS think they have the north one.
The BLUE BIRDS Hatched their first brood a few weeks ago and four survived and flew the coop. I waited a week, went out stripped the used nest out and wiped it down with bleach to disinfect, and let dry. Then last week I then closed it up. Then I monitor to make sure Sparrows do not sneak in. They did. So stripped out the early nest stage.
Monday, the BLUE BIRDS returned with youngins and fed continuously from the Meal worm feeder looking like a car wash.
Enter on one end, exit the othr, one after another, mom dad and now only three youngins.Then yesterday, the male begin, perching on the Hummer feed post, and continually hitting my bay window.
[attach id=0 msg=2575134]
I thought out of meal worms out, so took some out, but not out, so inspected the box. Yea, sparrows must of snuck early morning. Stripped it out. Brown feathers in the corner.
[attach id=1 msg=2575134]
The saw blade of the SIGNAL works nicely to complete short work of the shoddy nest sparrows but together.
This morning same behavior. Inspected feeder, inspect nest box, nad dah.
Do I added a bird bath with fresh water, other is under repair due to a big coon breaking it from the pedestal.
Shortly the male repeated to window tapping but added the patio door by kitchen dining area. He hits the window while perched on the door handle and only if I am in the kitchen. If in the family room, then bay window.
So repeated my routine, yep, sparrows again South box.
Stripped it out again.Only thing I now think is momma blue is not ready to build the nest yet, papa blue is a nervous Nelly, is to tired chasing the sparrows away he can not get momma blue in the family way so is using me to discourage the sparrows.
Blue Birds can have up to four broods in a summer. And once young ones leave the nest. They do not return.
They do not eat seeds, only bugs and dry meal worms. Plus water and suet cake. I have the table set but still being pesky.

-
<u>DAY 3</u> A friend and I went out and shot our muzzleloading rifles between rain showers. A fired cap got stuck in the hammer, and I used the awl to remove it.
[attach id=0 msg=2575151]

-
Nice patina on that lock.
-
Day 03 Leatherman Mini Tool challenge
I used the mini tool's knife blade to cut a cigar. It didn't do a very good job because it is fairly dull. That's on me. I've owned it since 1994 and I don't remember ever sharpening it.

-
Day 3.
Nextool S0.
I'm starting to put some applications in, and a few places have internships that pay well, but have strict "no weapons" policies that include knives (yet have scissors with like 12" blades all over the place...). Thus, I've started improving my bladeless options.
Good scissors, tiny slotted, Phillips 0/1 and nail file, as well as big slotted/bottle opener. Tweezers as well. No blade, and really slim. I hate to say it, but inexpensive Chinese-made tools are no longer junk. They always used to be heavy, poorly made, and no tools functioned well at all. The Ozark Trail Multiforce proved to be decent. Even the Raptor clone I've used for this challenge is far from garbage. This one will likely replace Classic SDs in my use.
[attach id=0 msg=2575189]

-
Day 3
I mentioned the other day how we have these awful things called gum balls because they gum from sweet gum ball tress. I decided to see if the magnifying glass could do justice to their points

-
Those look nasty!
Likely modeled for the production of a larger version for some horror film or sy fy flick.
-
Hey CODY, good luck, and hope you land a well paying internship that will interest you.
I too treated myself to a Raptor. Mine is the RESCUE. FITS MY XXL hands pretty well and cuts amazingly well.
I bought two, this color combo for me and the new ROSE for. Granddaughter on track to graduate with her RN later this year I think. Hers is the new RAINBOW model. My oldest daughter bought both new ones when released. She is an INSIDER. Got the and her emergency staff discount too.
[attach id=0 msg=2575199]

-
@Sos24 said:
Day 3
I mentioned the other day how we have these awful things called gum balls because they gum from sweet gum ball tress. I decided to see if the magnifying glass could do justice to their pointsOuch! We get tons of those, not much fun in bare feet!
In solidarity with Sos, here’s a few more :D they’re a bit squashed as wrong time of year for us but still hurt if you tread on them
Day 4

-
Day 4 of 30
Used blade to slice banana for my breakfast
[attach id=0 msg=2575224]

-
<u>DAY 4</u> I moved a rose, Doreen's Centennial, from a pot to the garden. Surge assisted by slicing mulch bags.
[attach id=0 msg=2575227]

-
Day 4. Me and a SIGNAL.
SPARROWS are just agitating the BLUE BIRD COUPLE.
This morning within a few minutes of starting my coffee, MR BLUE was pecking at my back door. Then continued to the bay window while I played my WORDLE.
I perplexed, the nesting box was empty at dark last night.
So, my surprise on inspection, the squatters were back with a make shift attempt to claim the prime box again. S.
[attach id=0 msg=2575274]
A half ass attempt! Now I am really really p——ed!
So,
[attach id=1 msg=2575274]
SIGNAL saw blade pulled these grass stems out and I left the box door open hopefully to discourage the SPARROWs.Hopefully the saga will end today.


-
I didn't get in the house until late yesterday evening and had to jump right in bathing the kids since they had the great idea to turn themselves into swamp monsters with the mud from a mud puddle down the street

Day 3:
Used the main blade on my Rebar to cut a bunch of weed cloth in the garden overhaul my wife started yesterday[attach id=0 msg=2575281]

-
<u>Day Four</u>
The best use for a Leatherman is always to open another Leatherman…
[attach id=0 msg=2575283]

-
Day 4:
NexTool S0 again.
First thing I did was pull the kitchen Moen faucet's aerator to take it to Lowe's for a replacement. It was so old, it crumbled when I tried to put it back together yesterday. Bagged it and the metal bit it fits into (as it had a part number), but forgot it, so I just bought everything else (including the showerhead at Walmart--we're on a spring, and fine sediment that's too big for the filter to catch it loves to ruin most shower heads and sink aerators eventually). Used the slotted driver on the S0 to pull an -Ring out.
Few light scissors jobs, and I filed a rough edge off one of the Great Neck-made Hyper Tough screwdrivers (Made in USA--and decent for $6) with the nail file.
Gotta admit, I'm really beginning to like it. Slim and light, plus offering most of what I used to carry my Pocket Toolchest for (larger scissors, but also the three drivers, a nail file, and tweezers).
[attach id=0 msg=2575293]

-
Day 04 Leatherman Mini Tool challenge
Today I needed to file my fingernail after snagging it on something. The mini tool has an adequate file for such use.


-
Day 4:
Used the serrated blade to cut some plastic edging for my wife's new flower bed, the saw to cut down some dowel after we ran out of plastic stakes, and the PE blade to sharpen them a bit.
[attach id=0 msg=2575320]
-
Nextool S0.
I'm starting to put some applications in, and a few places have internships that pay well, but have strict "no weapons" policies that include knives (yet have scissors with like 12" blades all over the place...). Thus, I've started improving my bladeless options.
Good scissors, tiny slotted, Phillips 0/1 and nail file, as well as big slotted/bottle opener. Tweezers as well. No blade, and really slim. I hate to say it, but inexpensive Chinese-made tools are no longer junk. They always used to be heavy, poorly made, and no tools functioned well at all. The Ozark Trail Multiforce proved to be decent. Even the Raptor clone I've used for this challenge is far from garbage. This one will likely replace Classic SDs in my use.
[attach id=0 msg=2575189]
I received the Nextool Micro Sailor in a giveaway. It is a nice bladeless option. The scissors work well for cutting especially considering the lack of blade. Good lucj on the internship hunting.
@MTSAK said:
Day 4:
Used the serrated blade to cut some plastic edging for my wife's new flower bed, the saw to cut down some dowel after we ran out of plastic stakes, and the PE blade to sharpen them a bit.
[attach id=0 msg=2575320].
Sounds like a busy day@Crunchie64 said:
<u>Day Four</u>The best use for a Leatherman is always to open another Leatherman…
[attach id=0 msg=2575283]
Hopefully a nice one.
@MTSAK said:
I didn't get in the house until late yesterday evening and had to jump right in bathing the kids since they had the great idea to turn themselves into swamp monsters with the mud from a mud puddle down the street
Day 3:
Used the main blade on my Rebar to cut a bunch of weed cloth in the garden overhaul my wife started yesterday[attach id=0 msg=2575281]
Great use. Good luck on the gardening.
@Fireman said:
<u>DAY 4</u> I moved a rose, Doreen's Centennial, from a pot to the garden. Surge assisted by slicing mulch bags.[attach id=0 msg=2575227]
Good luck. Lots of outdoor work.
-
Day 4
Some basic cutting, but went with a glamore shot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login