“Choose Your Own Challenge - June 2026
-
<u>Day Four</u>
The best use for a Leatherman is always to open another Leatherman…
[attach id=0 msg=2575283]

-
Day 4:
NexTool S0 again.
First thing I did was pull the kitchen Moen faucet's aerator to take it to Lowe's for a replacement. It was so old, it crumbled when I tried to put it back together yesterday. Bagged it and the metal bit it fits into (as it had a part number), but forgot it, so I just bought everything else (including the showerhead at Walmart--we're on a spring, and fine sediment that's too big for the filter to catch it loves to ruin most shower heads and sink aerators eventually). Used the slotted driver on the S0 to pull an -Ring out.
Few light scissors jobs, and I filed a rough edge off one of the Great Neck-made Hyper Tough screwdrivers (Made in USA--and decent for $6) with the nail file.
Gotta admit, I'm really beginning to like it. Slim and light, plus offering most of what I used to carry my Pocket Toolchest for (larger scissors, but also the three drivers, a nail file, and tweezers).
[attach id=0 msg=2575293]

-
Day 04 Leatherman Mini Tool challenge
Today I needed to file my fingernail after snagging it on something. The mini tool has an adequate file for such use.


-
Day 4:
Used the serrated blade to cut some plastic edging for my wife's new flower bed, the saw to cut down some dowel after we ran out of plastic stakes, and the PE blade to sharpen them a bit.
[attach id=0 msg=2575320]
-
Nextool S0.
I'm starting to put some applications in, and a few places have internships that pay well, but have strict "no weapons" policies that include knives (yet have scissors with like 12" blades all over the place...). Thus, I've started improving my bladeless options.
Good scissors, tiny slotted, Phillips 0/1 and nail file, as well as big slotted/bottle opener. Tweezers as well. No blade, and really slim. I hate to say it, but inexpensive Chinese-made tools are no longer junk. They always used to be heavy, poorly made, and no tools functioned well at all. The Ozark Trail Multiforce proved to be decent. Even the Raptor clone I've used for this challenge is far from garbage. This one will likely replace Classic SDs in my use.
[attach id=0 msg=2575189]
I received the Nextool Micro Sailor in a giveaway. It is a nice bladeless option. The scissors work well for cutting especially considering the lack of blade. Good lucj on the internship hunting.
@MTSAK said:
Day 4:
Used the serrated blade to cut some plastic edging for my wife's new flower bed, the saw to cut down some dowel after we ran out of plastic stakes, and the PE blade to sharpen them a bit.
[attach id=0 msg=2575320].
Sounds like a busy day@Crunchie64 said:
<u>Day Four</u>The best use for a Leatherman is always to open another Leatherman…
[attach id=0 msg=2575283]
Hopefully a nice one.
@MTSAK said:
I didn't get in the house until late yesterday evening and had to jump right in bathing the kids since they had the great idea to turn themselves into swamp monsters with the mud from a mud puddle down the street
Day 3:
Used the main blade on my Rebar to cut a bunch of weed cloth in the garden overhaul my wife started yesterday[attach id=0 msg=2575281]
Great use. Good luck on the gardening.
@Fireman said:
<u>DAY 4</u> I moved a rose, Doreen's Centennial, from a pot to the garden. Surge assisted by slicing mulch bags.[attach id=0 msg=2575227]
Good luck. Lots of outdoor work.
-
Day 4
Some basic cutting, but went with a glamore shot
-
Day 5
Getting cooler as winter sets in and discovered some of my shoes had gone a bit mouldy
This shot is about midway through the clean. Stiff brush used to remove the spores (outside so they don’t spread to everything else!), then dabbed with diluted white vinegar, let dry, light brush then protecting spray.
PX cut up the rags

-
Day 5 of 30
Used blade to slice open my breakfast banana.
[attach id=0 msg=2575335]

-
<u></u> Surge for scale in the gardens.
[attach id=0 msg=2575343]

-
<u>Day Five</u>
Added another Crunch to the collection.
[attach id=0 msg=2575345]

-
@Crunchie64 said:
<u>Day Five</u>Added another Crunch to the collection.
[attach id=0 msg=2575345]
Wow, congratulations!
How? Did it arrive so fast? It takes normally two weeks for me to receive any purchased ordered from LM Portland.
-
Day 5. Me and my SIGNAL
[attach id=0 msg=2575352]
Three implements are tucked in the blade handle, the AWL, the can opener and the 2D bit holder!
The AWL sees the most action, I score cutting lines, I use to slice open packages, scrape crud from objects, perforate cap lids for water sprinkling purposes, etc etc.
The can opener, gets the least action I must admit, as many of my cans have pull rings. But, it does resemble other LM versions and if necessary, it may or may not perform adequately.
[attach id=1 msg=2575352]
The one item I must point out, is that to utilize any of the 3 implements, you can not use with the tool handles folded together. The striker portion, prevents that from occurring on the saw handle. So using any of these three you have a long handle to deal with. 😳


-
Day 05 Leatherman Mini Tool Challenge
Spent most of the day at a non-permissive work site, so I had to take everything off my belt and leave it all locked in the truck. It was the most anxious few hours I've had in a long time. :ahhh :ahhh :ahhh At least nobody bothered to look at my keychain, so I still had a Classic SD with me.

-
Day 5
No use of the magnifying glass but used the blade of the Woodsman to open some packages and candy
-
Day 6
Seeing the new very cool looking LE PX USA250, thought it a good opportunity to show off my annual LE PX collection :D


-
Day 6 of 30
Used phillips to tighten screws on step stool
[attach id=0 msg=2575426]

-
<u>DAY 6</u> Surge and my tool kit: bits, ratchet, extension, and some real t-shank blades.
[attach id=0 msg=2575434]

-
<u>Day Six</u>
I usually carry a P2 or Arc, so I’m missing the convenience of some hand opening blade a bit.
Pairing the Crunch with a Squeak does the trick.
[attach id=0 msg=2575435]

-
Day 6. Me and my SIGNAL.
[attach id=0 msg=2575436]
Today will be a busy day, graduation parties to attend, getting old is strange, the parties on my list are now for my grandson and also children of my children’s friends’ children. My extended family of family. Walk across was Thursday evening for my grandson, and classmates.
Today, a bit of reflection with color!
Aqua is the first SIGNAL I purchased after patiently monitoring the auction site for weeks. It remains a favorite as it just looks so darn cool.
The ST300, my first real use MT, after rescuing from a Lowes when marked 50% off back in 2015 or 16.
My CASE ‘75, Mediterranean Blue, I just luv BLUE!
And, my latest TINKER with BROOK Trout Scales, just gorgeous! If this was a SPARTAN, I would have bought the entire series. 😉.
Have a great SATURDAY! A colorful one too!

-
Good to see that the Choose Your Own Challenge is doing well. Everybody seems to be having a good time. Just watching the posts and enjoying from the sidelines. Best wishes. G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login