Monday Bonday !
-
Nice Bond and Buck photo, Gordon. Best wishes. G

-
Mags - The BOND was to be a reincarnation of the PST. THE PST, is the grand father of the REBAR.
THE PSTII is actually the grandfather of the WAVE, with scissors and diamond file.
I refer to my BOND as my REBAR LITE.
The BOND is non locking, lacks the saw, and serrated blade. The file on the BOND is HARDY and can with its edge cut a saw branch, a plastic tube if need.My big like is the PHILLIPs and two flat screw drive blades. Plus my bit kit from REBAR/SuperTool 300 fits on my BOND, one kit, with any of my prime. plier MTs multiple solutions.
Your PST II is special, I have one! But, never ever considered the Bond a descendent of the PST II, the CURL maybe, but never owned one.
My BOND serves me well for my pilgrimages in the urban world. The REBAR is overkill most times.
I love both the BOND and the PST.
If given a choice of only one going forward, I would choose…
The BOND! (2nd gen)
-
@IMR4198 said:
I am probably breaking a MTO rule by not encouraging superfluous hoarding and spending, but the Bond doesn't really have anything over the old PSTII. Except you can buy one for $50 in the US. Don't know if you can buy a new condition PSTII for that or not.
It is drilled and tapped for a clip, if you like clips (not included). At least some of the new Bonds are stiff. Grant has one that is stiff. Mine was stiff as a board. If you have some of the proper wrenches, you could loosen one up. These ship with no clip and no sheath now. Boo.
Best wishes. Gary (IMR)

Breaking rules ROOLZ Gary, and I appreciate your honest opinion. You're right too, that the Bond doesn't offer anything extra over my PST II, so between you and LC, I think I'm convinced

-
Monday BOND ay
[attach id=0 msg=2573501]
Morning walk on a beautiful Monday, required pruning bsck some low hanging branches.
My Buck blade handled the thin stuff, no problem. But, I encountered some thicker branches (3/8” or larger to 1/2”). The BOND’s file edge, handled no problem, cutting better than a saw blade imho!
Walked out debris from the file and aired dried while coffee was brewing😁

-
I never tried the file edge on wood. It is coarse enough to do double duty. That orange Buck is a good looker too. Best wishes. G

-
Monday BOND ay!

My Monday was more like BIZZARO Day!
I over slept this morning, good ear down, missed 7am alarm! Rolled over and it was 9:45, 😳 must have needed the extra snooze time.
On way to make trip to son’s estate to add moisture to his wife’s plants, she was nagging him🫣
I grabbed my BOND sheath w/tool, then decided with shorts, JJ will pocket clip inside my front pocket.
But, NO clip??? What the dickens, rolled over in hand, then noticed it was not a BOND, it was a REBAR!!! SS one at that…
Checked my Sheath, a Heritage style, yep there is a tool in there, and sitting there grinning pivot to pivot was the BOND 😁
Fooled you!
[attach id=0 msg=2574300]
After I returned from the chores, was most curious how they swapped sheaths. Think the BOND thinks away with the nylon holster, I WANT LEATHERMAN Leather!
[attach id=1 msg=2574300]
The pocket clip is one advantage for the REBAR LITE! (Bond)
Have a great MONDAY!
In the U.S. it is MEMORIAL DAY, to honor those that have served so others may be…


-
@magentus said:
You guys are getting me interested in the Bond. I'm guessing I should avoid the first incarnation if possible, because of the exposed blade tip issue? I'm a huge fan of the Rebar, but the non locking Bond would be an easier carry here in the UK.I know you'll all tell me I need to get one, but are there any real advantages of the Bond over my lovely PST II?
I got into this whole mess by deciding I wanted a replacement for my PST.
I’d had it for decades, carried and used it occasionally, and decided I didn’t want to risk it getting lost or stolen due to the sentimental value.
I bought a Skeletool RX, then a Bond, so I had work and leisure carries sorted.
Six years later, I’ve got a lot of multitools.
I wouldn’t say the Bind is better than a PST II in any way, but it is certainly a very easy tool to carry and use.
Compact, well-featured, and sensibly priced.
-

I got my first Bond, because they said it was PST like.😁
Then discovered PSTs on the auction site.
Now have multiples of each, PST and BOND. I actually like both, the PST is smaller and carries very nicely in good clothes, the BOND is hardy, and compatible with my LM bit adapter and kit. It carries very well with pocket clip too!
It sees action many times when the REBAR will be overkill.
Damn, I like them awl. But, will pick a SIGNAL over Skeletool any day.
-
Monday BONDay!!!
Even promotional services select the BOND
[attach id=0 msg=2574856]
This is dated 0423/0523 (blade side first*)
[attach id=1 msg=2574856]
Both sides have promos, and this is a gen 1 design.


-
Monday BONDay
A new week, Monday with BOND (REBARlite) in your pocket or pouch is a good way to be prepared.
What do you call a gathering of BONDS!
[attach id=0 msg=2575619]
A BONDing!🫣
Some may say I have issue!
I pulled my BOND from the kitchen utility drawer, the BOND kit, (with a diamond file) from a waist pack, a couple from the storage container and the BOND off of the project table. Awl for a group picture.
-
Bond with a little jack knife. Somehow I couldn't get the knife to fit in the L-Man pouch. Hmmm? Best wishes. G

[attach id=0 msg=2575649]
-
Monday BONDay
A new week lays before us, again…
Brewing second mug of coffee, noticed cupboard hand screwed.
It was loose
The Phillips on the BOND had honors,
[attach id=0 msg=2576301]
as it resides in my kitchen utility drawer😁😎Then a comparison picture against a REBAR,
[attach id=1 msg=2576301]
My REBAR Lite (top) and REBAR SS (below)


-
Bond looks so nice and sleek

-
Very nice
Seeing a dedicated Phillips driver instead of bits on a multitool always makes me happy -
-
Old school drivers. Best wishes. G

[attach id=0 msg=2576316]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
