Vintage hand tool thread.
-
@Brock O Lee said:
I was quite pleased with this old combination square set from Moore and Wright, made in Sheffield England. The previous owner/craftsman had his name engraved on all the pieces. It was well worn, but still dead nuts square. I could tell that the owner took care of it. All the important reference surfaces were clean and free of dings and marks.It came in a sad old wooden box, with dirty and broken polystyrene inserts. The box showed significant wear and tear. It was covered in dirt and grime and paint when I got it. It's nailed all around the corners, so no surprise that it eventually started to fall apart after all these years. However, it fixed up nicely with a light sanding, glue and a few coats of wood oil. I cut new foam inserts from those interlocking foam flooring mats.
Nice find! Great job on the box and inserts. "Dead nuts square" is that N industry term? :D
-
@AzteCypher said:
I like the look of the handle on the ripsaw. Maybe you could recreate it by looking at examples online?It might be a cool project to attempt re-cutting those teeth.
https://paulsellers.com/2012/11/recutting-saw-teeth-an-at-the-bench-method-that-works/
I definitely want to try repairing it and also replacing it.
-
Cleaned tools from a recent estate sale buy.




-
This Indestro Mfg, No. 220, hex drive, Auto Socket Wrenches set is in excellent condition. The embossed tin has a lot of the original gold and black paint. According to Alloy Artifacts this set was manufactured between the late 1920's and late 1930's. My ratchet doesn't match the example in Alloy Artifacts and it isn't marked. I also have an additional bar handle that was in the box, but doesn't appear to go with the set.



-
Snap-On Ferret 3/8 drive ratchet. Date code appears to indicate 1944 as the year of manufacture. Enlarge the photo with the direction lever and you will see the date code between On and Off.




-
@Yadda said:
Purchased at an estate sale last weekend, this 1/4 inch drive Craftsman, pear head, quick release ratchet is model No. 43175. According to Jim C's Craftsman Ratchet type study on the papawswrench.com website, this ratchet is a type 8 manufactured between 1970 and 1971. The makers maker is the single line V.Originally Moore Drop Forge, then Easco before the hostile takeover in 1985. Out of Springfield Mass until the late 1990's I think. Most of those old places are medical offices now but I think there is still one specialty forge there for aerospace industry, some company out of the UK
I have an older half-inch ratchet with no quick release button. That quick release was invented by a young Sears employee back in 1964, and they started rolling them out the following year. So I'm guessing mine might be from the 1950's. I'll have to check the other symbolism. I still use it. It's a beast
-
@Yadda said:
Today's estate sale buy. Two NOS packages of Craftsman saw blades, Klein, hacksaw and speed.driver, Craftsman speed driver needle files, ratchet and socket extensions, Stanley pistolgrip saw, Millers Falls 4 way driver, Crescent linemans pliers, Utica adjustable wrench, Powr-Kraft ratchet and Snap-On sockets and speed driver. My favorite item is the Klein 701-S high tension hacksaw.I've got a Crescent Linesman's plyers made in USA and marked Bell System. Not sure the age. It, too, is a New England tipped plyers, but has blue coated handles
-
Nice ratchets. I put them as Moore Drop Forge (Maker V, or V series), Springfield Mass. Mid 70's to mid 90's vintage. Double lines were 1947 to 1996, but...pointy A changed to flat top A about 1966/67... Started putting catalog numbers on ratchets in the mid 70's
-
Unfortunately once again confounded. Took a simple picture with a modern cellphone, jpg, and "an error has occurred" when trying to upload. Copied and cropped the pic hoping to reduce kb, but to no avail
-
@Brock O Lee said:
Here are a few old hand tools I got from Evil Bay. They cleaned up nicely! Not sure if some of them classify as "vintage" though?I missed this one, those pipe wrenches are called end wrenches, there for working in tight spaces especially for up against walls, there ridgid which I think is #1 when it comes to plumbing tools, I don’t think there too old, they look fairly new..
JR -
@ThundahBeagle said:
Unfortunately once again confounded. Took a simple picture with a modern cellphone, jpg, and "an error has occurred" when trying to upload. Copied and cropped the pic hoping to reduce kb, but to no availIt can be frustrating. I have afeature on my Android and my iPhone that allow you to reduce file size. I usually reduce to 40%.
-
This mid 50's J. H. Williams 1/4 drive socket and wrench set, Model NM-6 had 23 pieces when new. I have 16 pieces. The pliers are broken and the sliding T-handle is a more recent model. Interestingly, the specialty 4 and 8 point sockets are not missing. This will be fun to clean and complete. Thanks to Archive.org for their fantastic tool catalog collection.




-
How in the heck do you break a pair of ignition pliers?
-
Kraeuter 3.5-inch brick chisel.

-
Blue Point HS21 hacksaw.



-
Hefty hand vise. It weighs almost a pound. Made in U.S.A.. Possibly made by Bridgeport.


-
This Duro No. 4502 midget socket set, from the mid to late 1930's is missing the always missing crossbar. The midget breaker bar is unique. It was designed to be used with one of the square nuts as an extension or as an extender breaker bar if you bought one of the larger sets with an extension.

-
Nice stuff!I planned to sell some stuff today at an antiques store by my house--ended up trading it for a few things--namely, a Gatco sharpening system (Lansky clone) and these two tape measures. Better than an old TMNT tractor I wonder why I bought, a Gerber MP600ST (never used the actual "ST" part), and a HW Jeep I forgot I had until last month--it was in some old cases in the outbuilding for a decade.
Metal cases on both!
The owner (really) overpaid for some Redline HWs (as I know his margins, and the asking prices were sky high--some valued 4x book), and I presume was a bit low on funds as sales had been slow.
Lufkin W926 (the actual number on the tape is worn off, but it matches up to the 1967 catalog listing) PS--they called these Mezurall tapes. Since when did Milwaukee start using that name?
Also, it's got some serious tension on that spring! I adjusted the removable belt clip a bit, as it hung loose. Not that I intend to use this one much--I mostly use the Bauer 6-footers as they're cheap to replace. But, this one is so much nicer than that HFT el-cheapo.
[attach id=1 msg=2576775]
[attach id=0 msg=2576775]
Craftsman 3950; from the '60s. Curious why tapes didn't have the "Crown Top" logo--as the 1964 catalog shows this same exact tape as the 9 M 3950.
This one went straight in the '60s box my Granddad had for many years, alongside most of the older tools I no longer use much.
[attach id=2 msg=2576775]
[attach id=3 msg=2576775]




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

