Giants of June / Big Blades Challenge - June 2026
-
That Ontario looks like a good handy knife. I like the blade shape. Best wishes. G

-
Day 12
I don't know why this is how Pumpkin wanted her picture taken, but here we are...

-
@BPRoberts said:
Day 12I don't know why this is how Pumpkin wanted her picture taken, but here we are...

-
Day 12
Quick pic at the Chinese food place before we see a movie.
[attach id=0 msg=2576104]

-
@old Lefty - That a nice one! Especially since it aids in cutting the cheese cake faster.

<u>Day 12</u>
For some reason, this small piece of synthetic thread was bugging the snot out of me. So I had to cut it.

-
Day 13:
Natural balance for Tenebra is the Luce.
Non-coated blade being the only difference they made another hundred of these:

Sent from my iPhone using Tapatalk
-
Day 13
Kudu came along on a little trip to the shopping center. Walmart, Dollar Tree, the usual routine. I walked by the Vape place and Hellcat Tattoo to get to the Buck Fifty Tree. No business at the Vaper Place or the Ink Shop. I suppose if you are in the business to make tattoos of a Hellcat pretty soon you run out of people wanting a Hellcat tattoo. I wasn't real sure about what a Hellcat was, but I'm pretty sure I dated one. There was a big graphic on the door of one to remove doubt. Looked like a panther sort of bipedal creature. All black with a top hat that had red, white, and blue stripes. Patriotic Hellcat. The one I dated was scarier than this one. Dope dealers were at their usual location under a shade tree in the parking lot. These aren't street junkies. Nice cars and casual clothes. I saw one of them give a ride to a field hand in rags with all he owned in a dirty backpack up to the front door of W-Mart the other day in a custom Cadillac Escalade. The Kudu carried very well. Pulling it out of a front pocket is still liable to pull out whatever else is in that same pocket, however. Can't even tell you are carrying the CASE peanut. The CASE is pretty but really dull. You could cut slices off a ripe banana if you had a mind to. A black snake has started hanging around my back door area. It skedaddled just as I was coming out the back door and slid down through the flowers at high speed. I left some Garbanzo beans for the raccoons. They wouldn't eat them. Turned over the foam plate in disgust and dumped out the little tan comestibles. ¡Ay, carramba! Best wishes. G[attach id=0 msg=2576120] [attach id=1 msg=2576120]


-
Day 13
Time for a fixie. Mora 711, carbon. Great quality for a $10 knife.

-
I knew what a Mora 511 was but had to look up the 711. Three hot days in a row here. It heats up slowly here and cools off at night. Not too many hours of sun between the mountains. Still it feels hot. My theory is that the mountains are closer to the sun and lack the protection of thicker air and nice healthy smog. So it is more dangerous to go out in the direct sun here.
I wait for the shade to come over before I run the mower in the evenings. It takes until about 3PM or so for the grass to dry. So, I charge up the Cub battery about 3PM or so and mow like a fiend about 5PM. Weedwackin takes place in the morning before it gets hot. Doesn't make any difference if the grass is wet or not. I have had to put out ant baits to try and kill back a big colony of ants that have been working along my front walkway.
I thought of buying a Mora from a friend on here a couple of years ago. Mora Garberg. Big bushcraft type thing. Then, I thought that I really couldn't carry it much. So, I decided not to try it. I might have to dig out a fixed blade or two before this challenge is over. Maybe tomorrow.
Best wishes. G

-
Day 12
B’yond EDC Nighthorse
I broke my usual rule with this one, and paid over $100 for Chinese-made knife. Worth it though; it’s a sweet blade.
This particular variant is a mountain site exclusive, and features Ti handles and S35VN steel.
The handle has various texturing in all the right places to enhance grip, while not being overly-aggressive, and being visually interesting as well. A lot of manufacturers could take some lessons from this handle.
The blade locks up solidly in the open position with its frame lock. In the closed position, the (I assume) ball detent holds the blade closed a little too firmly for my liking; I’m a bit worried I’ll fillet my thumb if it slips off the thumb stud while opening the knife.
The pocket clip is configured for RH, tip up carry only; and seems to be pretty effective. It’s so well-fitted that at first glance, I couldn’t tell if it was machined as a single piece with the handle or not. Though upon closer inspection, I was able to see two screws inside the handle holding the pocket clip on.
The blade features an interesting saber/swedge grind. The overall shape is somewhat reminiscent of a tanto, but the tip is more acute and the point where the two sharpened edges meet is rounded.
Overall, I’m not sorry I got this one, and have carried it some. However, I can’t help but feel that a few minor changes would take it from good to great:
- Get rid of the dual thumb studs and add a flipper. This would make both opening and closing safer, and result in a cleaner blade.
- Get rid of the swedge (I’m reminded how much I dislike swedges in general), and go with a more standard saber grind. Sure, this might increase the weight a little, but it will result in a stronger blade in general and a stronger tip in particular.

-
<u>Day 13</u>
I picked up this Rough Ryder in green canvas micarta upon Gary's suggestion. It's a boss of a knife but it tends to carry light in my pocket. It's a good looking knife that locks up good and tight with the liner lock.


-
Day 14:
Last of my Lajolos: the humble Sideral, even when not numbered special it is still highly efficient when handling fruit basket

Sent from my iPhone using Tapatalk
-
Day 14
My tattered Kabar knife. Some people spell this brand with a hyphen thingie, but I have a hard time finding it on my compooter keyboard. The name has something or other to do with a frictional frontier character named Daniel Finaughty who changed his name to Danl Boone because he had warrants. The legend goes that he claimed to have killed a bear with a knife very similar to the one I have. Possibly the very same knife. I think the handle has been coated with multiple slops of shoe polish. Most of the black has worn off of the still usable blade. The sad old knife resides in a cracked old leather sheath which has been likewise coated in Kiwi. It used to have a strap but that fell apart. Since I didn't have anything better, I replaced it with a rubber band. The sheath is now on its third or fourth generation rubber band. I didn't measure the blade, but I am almost certain that it is more than 4 inches. My big CASE is in the same photo. Not so much for scale, but rather so I can apply for the CASE badge at the end of the month.Best wishes, G

[attach id=0 msg=2576197]
-
My tattered Kabar knife. Some people spell this brand with a hyphen thingie, but I have a hard time finding it on my compooter keyboard. The name has something or other to do with a frictional frontier character named Daniel Finaughty who changed his name to Danl Boone because he had warrants. The legend goes that he claimed to have killed a bear with a knife very similar to the one I have. Possibly the very same knife. I think the handle has been coated with multiple slops of shoe polish. Most of the black has worn off of the still usable blade. The sad old knife resides in a cracked old leather sheath which has been likewise coated in Kiwi. It used to have a strap but that fell apart. Since I didn't have anything better, I replaced it with a rubber band. The sheath is now on its third or fourth generation rubber band. I didn't measure the blade, but I am almost certain that it is more than 4 inches. My big CASE is in the same photo. Not so much for scale, but rather so I can apply for the CASE badge at the end of the month.Best wishes, G

[attach id=0 msg=2576197]Neat old Kabar!
Day 14
Here's a different Kabar; the civvy Kabar 1205. AI insists that these are stainless steel, which just goes to show that you can't believe what AI says because this is carbon steel. Most likely 1095. I think I gave $5 for it, or something like that. It had a stacked leather handle that was in poor condition and missing some of the leather washers, so I wrapped some sisal twine in the gap to tighten it, then coated the handle with clear epoxy. I got a few cheap leather sheaths from SMKW for a couple of bucks each, and one of them was just the right size for this knife. The blade is about 5 inches.

-
I haven't seen one of those old Kabar hunting knives in quite some time. I started to say I never had more than one or two Kabars. Then I remembered that I used to own one of the displays with some knives in it. Duh. I sold all the knives to my knife buddy who took a fit over the display. He wanted it to put more knives in for his business. I let him have it along with a Gerber trout knife. He pouted and groaned about me taking him to the showers on the Gerber. That was the first thing he sold and he wanted me to get him another one. No such luck. I still have a pocket-sized stone with a fishhook groove in it that came with the display. It used to have an inked stamp that said Kabar on it.
I never saw one of the fancy titanium knives that our friend nate showed. I looked up a u toob video for it. Nice. The Ruff Rida of friend Aztecs should be a good carry knife. The two bladed models have the contoured handles for gripping, but aren't much use since one blade is always closed. The scallops are actually functional with a single blade knife. I feel like writing to SMKW and suggesting they change the name of their knives to Ruff Rida. I am quite willing to negotiate rights to the name and could work out payment in items from their store.
Best wishes. Gary
:ahhh -
Looks like my previous post was mislabeled (my second) “Day 12”, but should have been “Day 13”.

So this would be…
Day 14
Older (Japanese-made) Cold Steel Voyager. Better than the current Taiwanese-made version IMO.

-
Day13
An old Imperial, Prov, RI. An inexpensive model for sure, it only has one primary bevel. The other side of the blade is cometely flat.
[attach id=0 msg=2576252]
-
Some great knives lately, y'all!
Day 14
A CS Finn bear, a puuko style knife.
[attach id=0 msg=2576254]

-
Looking good, awl! Not dead, just having some tech issues.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login