Rebar Owner's Club (pic heavy)
-
That makes 2 of us!! -
@Barry Rowland said:
That makes 2 of us!!You're both welcome :D
-
Yesterday while going through some knives I came across a Kershaw Link I have not carried in a while. I figured that would be today’s carry knife and I would pair it with a Rebar. But which one? I couldn’t choose, so I grabbed both my Stainless and Black Oxide ones. While listening in on a meeting, the idea of doing a handle swap and making them Tuxedo versions popped into my head. So during lunch, I did the quick swap. Quick shout out to Poncho and others who have done this in the past.
JonesE
-
Now that is just being a fancy Dan!
You did more than just swap handles, you moved tools and rotated handle screws and locks. Awl to match the plier head.
Nice job!
-
They look great! -
Thanks LC and Barry! These are always fun little projects. Normally, I just swap in new parts for broken tools when I picked up used tools. These two were purchased new a while back. When did the Mother Ship start using red loctite? These were a real bugger to loosen up and get apart.

JonesE
-
Rebar with adapter and bits.
[attach id=0 msg=2576503]

-
@Antti Lammi said:
Rebar with adapter and bits.[attach id=0 msg=2576503]
Nice Antti. What are your thoughts on the adaptor and kit?
-
-
@Antti Lammi said:
Its handy time to time, usually tho i can survive without it but it has saved me couple times when i needed torx head. It sits firmly on phillips and doesnt wobbleThank you. Food for thought
-
I really like the black handeled one, JonesE. And that's a nice kit, Antti

-
@Antti Lammi said:
Its handy time to time, usually tho i can survive without it but it has saved me couple times when i needed torx head. It sits firmly on phillips and doesnt wobble
The adapter and bits are a nice accessory for the REBAR!
Plus, it fits the KICK, SUPERTOOL 300, the Vic SPIRIT, and SAK’s inline PHILLIPS DRIVERS and a few others.
My OCD caused me to also add a BLACK ADAPTER kit since two of my REBARs are with BO implements.
-
I've never tried that with the Spirit before. Thanks for the tip, LC :o
[attach id=0 msg=2576559]
.jpg)
-
It works even on Gerber phillips, i noticed that it bit wobbles on SwissTool phillips but its still usable
-
[attach id=0 msg=2576689]

-
I see. Great picture Antti

-
[attach id=0 msg=2576706]
All black, REBAR, adapter and torx bit with buddies.

-
@LoopCutter said:
[attach id=0 msg=2576706]All black, REBAR, adapter and torx bit with buddies.
Oh hootchie mama
-
Rebar with Heavy Duty saw, it cuts metal and wood. I should try make Bi-metal saw too since it has denser tooth it should make sawing bit easier.
[attach id=0 msg=2576804]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
