Giants of June / Big Blades Challenge - June 2026
-
Day 24
Jumbo CASE folder makes a return. Had some pocket schmutz on the blade. Needed a clean-up. Best wishes. G
:D
[attach id=0 msg=2577174]
-
Day 24
Case 6165 cutting twine to tie up 'mater plants.

-
Day 23
Cold Steel Bushman
[attach id=0 msg=2577225]

-
The sheath came with the knife, but I have had the knife 20 years or more.
I would like to get the bowie version to mount on a handle for a spear. -
Day 22
Speaking of Cold Steel, the Luzon's blade is as big as the Case's handle. That gray thing by my hand is the secondary lock, just in case...

-
<u>Day 24</u>
So.... I... did something.
I'm not sure if I'm happy about it or not, yet. But, it is what it is at this point.
I felt that my Opi No12 was a bit too stiff to open. So, in my infinite wisdom :rofl:, I decide to take it apart so I could sand down the pivot point. I would insert the blade, move it a bit, still felt too stiff, sand some more. These steps continued for several more times. I finally decided that I had sanded more than enough even though it still felt a bit tight.
(You know where I'm going with this now don't you.....?) :facepalm:
I decided to put it all together to truly give it a test. Oh smurf.... smurf...
Yup, you guessed it. It's loosie goosie now. Flips open like a balisong. :-\
I'm getting used to it now, and the kids think it's cool, so maybe it's not too bad. But it's definitely not what I intended.
Learn from my mistake kids!!
-
Day 25:
Task for the Cheese Master: -
@AzteCypher said:
<u>Day 24</u>So.... I... did something.
I'm not sure if I'm happy about it or not, yet. But, it is what it is at this point.
I felt that my Opi No12 was a bit too stiff to open. So, in my infinite wisdom
, I decide to take it apart so I could sand down the pivot point. I would insert the blade, move it a bit, still felt too stiff, sand some more. These steps continued for several more times. I finally decided that I had sanded more than enough even though it still felt a bit tight.(You know where I'm going with this now don't you.....?)

I decided to put it all together to truly give it a test. Oh smurf.... smurf...
Yup, you guessed it. It's loosie goosie now. Flips open like a balisong. :-
I'm getting used to it now, and the kids think it's cool, so maybe it's not too bad. But it's definitely not what I intended.Learn from my mistake kids!!
Congratulations! You have invented the world's first frictionless folder. Emm-pressive. Shouldn't be too difficult to put some varnish in the joint or something like epoxy on the blade tang. Child's play to place a thin little brass shim on the blade. Couldn't even see it. Just a razor thin washer sort of deal. I think I would call it dangerous as it is now. Best wishes. G:ahhh
-
Day 24
Cold Steel All Terrain Chopper.
[attach id=0 msg=2577305]

-
Day 25
This baby is winding down fast. I took a photo of the big CASE next to a dealer's catalog Cold Steel photo. I'm sure you could still order a SRK for $24.95. Assuming the distributor is still in business 40 something years later. I have been extra cautious lately due to the possibility of tripping over a raccoon when I step outside. Plus a snake was on my back step last week. Don't need to step on any snakes. Anyway I was in that state of mind as I drove home from Walmart yesterday. North Carolina doesn't mow on the road sides anymore. They started hiring locals to contract the job. Then diesel fuel costs went through the roof and NC didn't/couldn't hire anyone this year. There is so much stuff grown up now it is like a jungle. Vines and stuff have grown over the road signs. I can hardly see Ms. Phoenix lair now. I have to creep out to the end of my driveway, lean forward to see as far as I can, listen carefully for oncoming cars, then floorboard my vehicle and try to dash out into a lane without getting hit. Anyhow I was peering down through an opening in the green and saw the biggest snake ever down below my driveway. It wasn't particularly huge in diameter. Maybe as big around as my arm. But the thing was draped over a limb. There was 8 feet of the monster on one side of the limb and 8 feet on the other. The rest was hid in the grass. Never saw the tail or a head. No telling what the total length was. We don't have that kind of snake here. Must have been an invasive. Chills. I tried to look on the bright side. Maybe the mystery snake species eats overly friendly raccoons. There was a big wind storm yesterday and it must have blown the snake (actually a wild grape vine) down out of a tree. I never heard of anybody being bitten to death by a grape vine pretending to be a snake, so I continued on my way. I hope whoever finally shows up to mow runs over the thing and has to walk to my house for help with a huge grape vine wrapped aroung his tractor's mowing blade. I would be more than happy to rent him one of my machetes.Best wishes, G

[attach id=0 msg=2577310]
-
@AzteCypher said:
<u>Day 24</u>So.... I... did something.
I'm not sure if I'm happy about it or not, yet. But, it is what it is at this point.
I felt that my Opi No12 was a bit too stiff to open. So, in my infinite wisdom
, I decide to take it apart so I could sand down the pivot point. I would insert the blade, move it a bit, still felt too stiff, sand some more. These steps continued for several more times. I finally decided that I had sanded more than enough even though it still felt a bit tight.(You know where I'm going with this now don't you.....?)

I decided to put it all together to truly give it a test. Oh smurf.... smurf...
Yup, you guessed it. It's loosie goosie now. Flips open like a balisong. :-\
I'm getting used to it now, and the kids think it's cool, so maybe it's not too bad. But it's definitely not what I intended.
Learn from my mistake kids!!
Honestly, I like it. I have a Case Longhouse that I dialed in to be flickable. As long as it locks up clean on both ends, seems good. Civivi ships some of their knives so loose that they're basically gravity folders once you take the lock off, which may be a bit much for me.
Oh look, make up pics!
Day 23
Civivi Elementum (2? I think) and Case Longhouse. All I did on the Civ was tap the button lock and let it dangle. The Longhouse is officially a front flipper, but a good wrist flick will do it.
The Longhouse is probably my favorite "modern traditional." Pleasant to carry, good practical size, looks decent, easy to take apart to mod/maintain. Kind of surprised after market scales aren't more available for it. The Civivi is a cheap knife with a loose action. (Don't tell my wife.) Good knife for the price, but not really my style.


-
Day 25
Imperial H6 I just picked up.

-
Nice Imperial. Sheath is nice and clean too. Somebody bent the guards back at some time or other. Easily corrected or leave 'em like that. I might need to post an Imperial during the 20th. Best wishes. G

Late edit: Just for chuckles I might add that your nice Imperial hunter was available as one of a mix of four models in a countertop cardboard assortment in the 50's. The price of $1.25 was printed on the display for the H-6. That left a nice profit for the store owner. The model with the deer head handle was $1.50. There must be a bunch of those out there. G
-

Sent from my iPhone using Tapatalk
-
If some folks aren't golfers out there, a Mulligan is when you tee off and drive a ball out into the parking lot or into the pond. Among friends, you might say that was a Mulligan and just tee up another ball without counting it. Usually only Mulligan per person. Unless the guy making the bad shots is your boss or your rich father-in-law with a bad heart. In that case they are allowed unlimited Mulligans and an extra drink or two at the clubhouse.
Best wishes, Gary Mulligan

-
Spot on, Gary!
More broadly, a mulligan is a do-over, without any consequences for the first attempt.
-
@IMR4198 said:
Nice Imperial. Sheath is nice and clean too. Somebody bent the guards back at some time or other. Easily corrected or leave 'em like that. I might need to post an Imperial during the 20th. Best wishes. G

Late edit: Just for chuckles I might add that your nice Imperial hunter was available as one of a mix of four models in a countertop cardboard assortment in the 50's. The price of $1.25 was printed on the display for the H-6. That left a nice profit for the store owner. The model with the deer head handle was $1.50. There must be a bunch of those out there. G
Yeah, I definitely intend to straighten those guards. Both for originality and to make it fit my hand a bit better.
-
(null)
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
