20th Anniversary Challenge
-
Day 1!
Anything goes right?
I was going to take a picture of my kayak and my opinel that I always carry on the sea but I forgot.. So here are my kayak on an island called pirate island. I don't think there have ever been a pirate on this little island but just some km north are marstrand which do have had pirates! Marstrand has a lot of interesting stories and a recommend a visit if ever in Sweden[attach id=0 msg=2578011]

-
Day 1
I start with my true EDC (and probably first non SAK post on my end) - well worn Streamlight Nano on my keychain. I bought it in ~2020 and it is on the keychain since.
I am not really into torches and this one was somewhat outdated already when I bought it, but it works for me - I do not use it very often but it is there when needed, super small and simple. I realised I need to replace the batteries (probably after 2 years?). It is powered by 4 LR41.
-
Day 1:
What's better than my own modded/built trail guide to start the month?[attach id=0 msg=2578024]

-
I’m going to sneak in to this one.
Still an hour and a half left of 2st July here in the UK.
- IMR4198
- glenfiddich1983
- AzteCypher
- WECSOG
- Kottskrapa
- PitCarver
- ReamerPunch
- Antti Lammi
- LoopCutter
- z1913
- Echotech
- ulzhan
- fullbreakfast
- MTSAK
- Fireman
- Barry Rowland
- BPRoberts
- Sos24
- Nonaute
- David Bowen
- JonesE
- lazar
- nakken
- SteveC
- David
- CampusSecurity
- zoidberg
- Crunchie64
-
<u>Day 1</u>
As there isn’t a Free series Challenge yet, I’m going to use that as my theme, but I think it will qualify me for the Country of Origin badge for the US.
Seems fitting for your 250th anniversary, as well as MTO’s 20th.
[attach id=0 msg=2578028]
A silhouette of Mr Crunch in front of my new camping lantern.

-
You are quite welcome to try for the Country of Origin badge for US made items during the 20th Anniversary Challenge. However, you should understand that you can't get the 20th Anniversary badge also. Can't get two badges from one challenge. You can get two badges from two challenges this month. 20th Anniversary plus the DEAN traditional if you want to do that one for example.
Best wishes, G -
@IMR4198 said:
You are quite welcome to try for the Country of Origin badge for US made items during the 20th Anniversary Challenge. However, you should understand that you can't get the 20th Anniversary badge also. Can't get two badges from one challenge. You can get two badges from two challenges this month. 20th Anniversary plus the DEAN traditional if you want to do that one for example.
Best wishes, GAh, I’ve misunderstood the rules.
I thought you could get the Anniversary badge and another for the same challenge.
I’ll see how I go through the month then, and if I don’t stick to the US-made stuff for thirty days, I’ll request the Anniversary badge.
-
Do either as you please. I see you already have the Anniversary Challenge badge. You can get in addition the special 20th Anniversary badge that friend ReamerPunch is making for us. Separate badges. You can have both. I think most people want the one time only 20th Anniversary badge. I did Country of Origin when it was first offered. That one was fun too. Best wishes. G

-
Just want to make sure I have this right before I commit to my carry for this month:
-
The regular anniversary badge is available.
-
A new 20th anniversary badge is available.
-
Either anniversary badge may be earned, alongside another badge, BUT separate posts most be made in the threads for each badge?
-
-
You COULD ask for the regular Anniversary badge OR the 20th Anniversary badge but not both. Can't get two badges from one challenge. If you choose to take the regular Anniversary badge instead of the 20th Anniversary, I bet you will be the only one. Some members are doing the 20th Anniversary challenge along with the Dean Traditional. Post to both get both badges. Two challenges you might get two badges. G
-
Forgot to add my entry to the list, (picture of my first day on previous page)
- IMR4198
- glenfiddich1983
- AzteCypher
- WECSOG
- Kottskrapa
- PitCarver
- ReamerPunch
- Antti Lammi
- LoopCutter
- z1913
- Echotech
- ulzhan
- fullbreakfast
- MTSAK
- Fireman
- Barry Rowland
- BPRoberts
- Sos24
- Nonaute
- David Bowen
- JonesE
- lazar
- nakken
- SteveC
- David
- CampusSecurity
- zoidberg
- Crunchie64
- m47mu74nt
-
If there's a 20th anniversary badge, I guess I'll play along.
- IMR4198
- glenfiddich1983
- AzteCypher
- WECSOG
- Kottskrapa
- PitCarver
- ReamerPunch
- Antti Lammi
- LoopCutter
- z1913
- Echotech
- ulzhan
- fullbreakfast
- MTSAK
- Fireman
- Barry Rowland
- BPRoberts
- Sos24
- Nonaute
- David Bowen
- JonesE
- lazar
- nakken
- SteveC
- David
- CampusSecurity
- zoidberg
- Crunchie64
- m47mu74nt
- Alan K.
-
Day 01
Happy Anniversary MTO!
-
@Alan K. said:
If there's a 20th anniversary badge, I guess I'll play along.Friend Reamer is cooking one up. He has the eggs, sugar, flour, salt, butter and baking powder, but his milk went bad. I understand he needs to buy a fresh gallon. And maybe some raisins and chocolate chips.
Best wishes, G

-
Day 1
Today’s pocket carry - Cripple Creek Boys Knife and Fenix Flashlight
-
Day 1
In case you've never seen a fountain pen fully disassembled, now you have!
[attach id=0 msg=2578074]
And reassembled, swapping the broad nib to try a fine.
[attach id=1 msg=2578074]
And capped.
[attach id=2 msg=2578074]
I've owned a lot of fountain pens over the years, some of which were way more expensive than this Kaweco Brass Sport. None were as good. Writes great, built like a tank (LAMY claims their pens are. They're lying!), and look at that patina!



-
If it’s not too late to join, id be game for the special 20th badge.
Day 1:
I’ve been enjoying this micarta scaled rambler around the house.

-
Day 1
Maybe I can stay on top of this, I owe it to @IMR4198
Today is an assortment of things like usual, always rotating. I do have a 1980s wenger coming. My uncle had one and I want to carry one in remembrance of him. I believe it's the same model.In the photo is a new knife I got yesterday, not sure if I'm cool with it. Grip feels off, look forward to a future review. It's an MKM Tango 4 clip point.
[attach id=0 msg=2578078]

-
@David Bowen said:
Maybe I can stay on top of this, I owe it to @IMR4198
Today is an assortment of things like usual, always rotating. I do have a 1980s wenger coming. My uncle had one and I want to carry one in remembrance of him. I believe it's the same model.In the photo is a new knife I got yesterday, not sure if I'm cool with it. Grip feels off, look forward to a future review. It's an MKM Tango 4 clip point.
[attach id=0 msg=2578078]

Don't forget to post Day 1, Day 2 etc.
-
See... here's what I don't like about these large challenges. I've already seen several knives that have caught my attention, that I now find myself searching for on the interwebs.

Thanks for nothing (everything) you enablers.

<u>Day 1</u>
SAKs first drew me here or rather how to fix them, clean them, and modify them. I lurked for a while before finally deciding to join. I met Gary first and he took me under his wing and showed me the ropes. After that, it all went down hill. I had a few multi-tools, some Kershaws, a Vic or 2, when I first joined. Now...? Eh... I decline to comment.

Using my first Opinel No8 I picked up in a knife lot to open up a box of damaged filters for the a/c. Thanks for nothing Amazon. They're heading right back out so they can send me good replacements.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login