Happy 20th Anniversary to everyone!
-
Happy anniversary!
Hard to believe it’s been around so long; certainly doesn’t taken that long ago since I stumbled across is (and SOSAK). Looks like I’m a few months shy of 17 years on this site

-
@Huntsman said:
Happy Anniversary to everyone indeed.I just checked - In September I will have been around for 13 years.
Having always carried a SAK and later acquiring a LM
I was doing a bit of internet research - And this place had all the answers to all of my searches and questions
So I join up after a little lurking - Andbecame obsessed withgot more and more into MT and SAKsIt's been a massive part of my life since then and a fantastic group of people to hang out with
And I even managed to meet up with a few buddies at one of the UK meet ups a few years ago - Not a bad achievement given I live in Australia.I cannot believe it has been that long
Thanks to Grant for setting this place up in the first place - I love those stories of the early days
And of course to all the members and mods and admins past and present who make this place so great.And watch out for the 20th Anniversary Wiki quiz/gaw everybody
- Coming to a screen near you, hopefully over the weekend
I missed you my first time around- my mistake and apologies!
@Huntsman said:
Hi
I have a Ranger Realtree Snow 79 - Beautiful knife BTW
The blade is 102mm from the liner lock edge to the point - The cutting edge is 85mm
Or 4" and 3¼ is you prefer imperial.
CheersFrom your very first post you were helping people with info about SAKs- it comes as no surprise that all these years later you have been leading the charge over at SAKWiki!
So glad to have you here, and I am always impressed by the amount of work and attention you have given SAKWiki, for the benefit of everyone.

Def
-
@kottskrapa said:
Happy anniversary and great work boss!I think that what makes mto special are the the tone of conversation and how we are friendly. No petty judgment, pointing out spelling errors or downtalking. We are here because of our love for multitools and we all share that.
I haven't been here all 20 years, have seen some member come and go during my years but I belive the spitit has stayed the same
Maybe not all twenty, but since 2017- that's a respectable presence for sure! You are closing in on the ten year mark!
@kottskrapa said:
I am new here and thought this thread might be a good entry level.. My new Explorer is getting pocket time and fixing most stuff I need it to it has actually fails me ones. Needed to open a door without door handle and the farmer did this perfect with the bottle opener but it is smaller on the Explorer and didn't got the job done. Anything else have been perfect
It's not failure if you learn something from it
Now for the big question- are you still EDC'ing that Explorer, or have you moved on? :D
Def
-
@magentus said:
Happy 20th awl
Thanks to Grant and awl the mods behind the scenes making this forum the friendliest place on t'net. I can't remember how long I've been here, maybe 8 years, but it's been fantastic and funny and informative with great people, so here's to many many more years

Well, fortunately I can help with that- it looks like 2012!
Just joined today, through the new Swiss Army Knights site. The only multi tools I have are SAK's, a Huntsman I use as my EDC, an Alox Soldier in my pack, a Rucksack and a couple of Classics. I'm a big SAK fan, but like multitools in general (there's something about great design and usefulness that appeals to me). Nice to be here.
Magentus
And thanks for the reminder about the old Swiss Army Knives site. If we ever needed proof that it hasn't all been wins over the years...

For those who don't recall, we started a Facebook clone at swissarmyknights.com and that was supposed to take advantage of the growing fad called Social Media.

I don't recall what ended up killing that site, but it's the reason we moved the Swiss Army Knights here to Multitool.Org, where they have been ever since.

Let's hope GearFeed does a little better! :D
Thanks for everything man. It's been great having you all these years.

Def
-
@nakken said:
Ah yes, I remember that! I was researching which Leatherman to buy and ended up with a Wave+ after reading about it on this forum. I felt like I owed it to become a member, as it was indeed the perfect multitool.But then it happened: <u>the MTO effect</u>. Someone posted beautiful pictures like it was taken straight out of an ad, others replied with information and facts I couldn’t even find elsewhere. It started with one multitool, then came another. Fast forward seven years, and my collection has grown to 39 in total.
Having a platform with literally thousands of like-minded people makes for an absolutely outstanding community, and I’m proud to be a part of it. Just don’t tell my wife :ahhh
Consider yourself lucky. I think I had seven multitools when I started MTO, and, well, I think I have reviewed over 150 on the Main Site alone. They certainly do find a way to worm into your daily life, don't they!

Def
-
@glenfiddich1983 said:
Happy 20th anniversary all! 
I joined this forum almost eleven years ago after I bought my second Swiss Army Knife, because from the moment I owned two SAKs it became a Collection of SAKs. And when one has a Collection of something, one should join a Community :)
Over the years I have joined a lot of different forums because of this principle, but on only one of them I am still active and that is MTo. None of the other forum has the same pleasant atmosphere, where people are nothing but enthusiastic about each others knives, axes and whatever tools they use and collect.
MTo just doesn't seem to attract the (on many other forums) usual share of people who always seek conflict and competition, always knowing it better and trying to undercut each others choices and arguments. This relaxed atmosphere is really what makes MTo the great place it is. So cheers to you all for this!

The last couple of years, basically since the end of 2019, I haven't been very active here. That has nothing to do with this great place and its' occupants. One of my best friends died in november 2019. He was also a knife enthusiast and basically the person who got me into knives as well. For a while my enthusiasm for collecting knives just wasn't the same as before. Also we started renovating and modernizing our house, had a couple of promotions at work, and before you know it's six years later.
Life is getting into calmer waters now and I am starting to pick up my SAK collection again, and with that expect to be back here more often :)
I think your logic may have been flawed- I was under the impression that you need three of something to be a collection, not two. I'm sorry to have to be the one to tell you this, but it appears you may have wasted the last eleven years!

@glenfiddich1983 said:
One of my friends has infected me with some kind of SAK-virus. Now I find myself browsing on obscure sites like sakwiki.com.Very disturbing! ::)
So. Well. I'm Michel, 31, from the Netherlands. A few months ago I bought my first pocket knife, the Victorinox Compact. Not long after this I also ordered a Victorinox Trailmaster (also known as Trekker).
So this is my current collection.


More is underway, I will post pictures in the appropriate threads :)
You have to watch those websites that your friends tell you about- they can be very habit forming! :D
Def
-
@Barry Rowland said:
Def, and everyone, thanks for the best place on the Internet and in life! You did well my friend! Year 11 here.Year eleven? Has it been that long? It seems like only yesterday you were a snot nosed old guy!

@Barry Rowland said:
My beloved PST :-)Your first post may have been brief, but I'm glad your stay wasn't! I can hardly think of a time when you weren't cheering on the forum here and on FB. Thanks for all the support over the years man. It is greatly appreciated.
Def
-
@Nonaute said:
(Sorry for google translating)A forum reflects the character of its founder; a kind and personable creator will bring a kind and personable community to life. If MTO is such a wonderful community, it is because its members share common values that transcend and go beyond any potential political or societal disagreements.
I joined only recently; I was looking for information on Leatherman tools, but I found something far greater and better: I found MTO.
So, happy birthday, MTO, and thank you to everyone who keeps it thriving day in and day out! (Def, I thought of you while I was in Portugal ;) ).
Je vais devoir te contredire là, mon ami — si ce forum reflétait vraiment son fondateur, l’odeur de tant de trous du cul ferait fuir même les mouches les plus affamées.
I am also so glad that the forum doesn't pick up that kind of language outside of English!

@Nonaute said:
Hello world ! (Of multitools) :)I'm from France, so excuse me in advance for my poor english language

I am trying to collect the main retired leatherman multitool, just because ;)
I already have :
8 PST
1 pulse
1 core
1 kick
1 fuse
1 bond
1 crunch
1 mini tool
1 pst II
1 super tool
1 super tool 200
1 wave original
1 tread (large)Still looking for blast, charge titanium, surge original, flair, fuse knifeless, sideclip.
But my second goal is collect 1 PST of each period.
I've got :
1 Japan
1 no datestamp
1 1999
2 2000
1 2001
1 2002
1 2003I saw there is a book, written by someone here (Legend ?), I would litteraly love to buy this book. If someone knows where to buy it, please let me know !
Oh, I've got several other multitool, by the way, but I'm focused on Leatherman (I've got a PST with me, each days of each years, since 2000 :) ).
For me, the PST is the ultimate Leatherman.
Well, feel free to ask me anything if you want, I'm happy to talk with peoples who like Leatherman's as I like them :D
See you !
J’utilise aussi Google Traduction pour aider mon affreux français, mais ça vaut vraiment la peine de pouvoir te montrer à quel point j’apprécie ton temps et ta participation sur le forum. Merci d’en faire partie, mon ami, et j’espère que nous célébrerons encore beaucoup d’autres étapes ensemble.
Def
-
@pfrsantos said:
Parabéns a nós! Happy Anniversary to awl of us!

Can't believe I've been
having to put up with you, smurfing smurfsenjoying your amiable company for awlmost 14,5 years (Or over 174 months. Or 747 weeks. Or 5229 days. Or 125496 hours. Or whatever!). You guys make me old!
Still...

Here's to a few more decades!

I honestly don't recall a time when you weren't here, making That's What She Said jokes! I don't know how we ever survived without you keeping the tone light and fun all the time!
@pfrsantos said:
Greetings!006- CMUtuba
007-zed
015- Scattergun13
017 - GPDB
023 - davetelf
033 - Threeme2189
034 - harrypotions
035 - stack
041 - Sparky415
042 - KD8FRE
054 - multitoolgeek
088 - Powernoodle
117 - Tofty
123 - Pacmanclyde
136 - pfrsantos
139 - Logrus9
147 - jzmtl
155 - Inzelique
167 - Ashley
175 - MeadMaker
179 - legtu
187 - Makaveli
188 - forte
191 - Xelkos
211 - nuphoria
242 - Dr.Lipids
248 - kmanct3
275 - Gareth
279 - santos
282 - 82brutus
288 - Stormdrane
300 - OddFutureVery nice indeed!

@Santos: Make it 3 newbies...

Again, I was sure your first post would have been a meme of Micheal from The Office!
Eu sei que o meu português é terrível, mas agradeço muito por você ter dedicado uma noite para estar conosco. Foi o ponto alto de uma viagem fantástica. Muito obrigado por tudo.
Def
-
@Frenchephaistos said:
Best forum ever !
Hoping to be there for the 40th !I will be sure to save you a seat! I will admit, seeing how much stuff we have for our 20th Anniversary makes me scared of our 25th! :ahhh
@Frenchephaistos said:
Hello from France ! Any others on the forum ?
I love my LMs, even if I sometimes use a swisstool, always sported in the adequate skinth…
You can't have too many multitools, but you can have not enough money…
So maybe I should have not registered on this forum ! :DLe manque d’argent est toujours le problème, et pour ça, je m’en excuse. Être membre de ce forum devient très cher, très vite. Malgré tout, merci de faire partie de cette folie !
Def
-
@PitCarver said:
Gotta say, thanks for this place.
Best spot on the Internet.Happy Anniversary MTÓ.
A forum is only as great as it's members! You guys make this place what it is, so I am thanking all of you for helping it be as spectacular as it is.
@PitCarver said:
I, PitCarver, being of relatively sound mind and body, hereby entreat the powers that be to consider me for membership in good standing in the Swiss Army Knights and promise to place no knife before my trusty Swiss Army.
Till rust do us part.However, I'll rust before my Victorinox will.

Glad to have you as part of what makes this place so great- not too many people will find a new website and instantly take an oath on it! :D
Def
-
@Antti Lammi said:
Happy birthday MTO

I joined around 9 years ago, i was searching then flathead for my Wave what i broke and i founded this forum that way, tho i started to seriously post around 8 years ago and then this forum came best place to be and founded many interesting things while browsing and also start collecting SAKs and multitools
There's something poetic about a broken wave leading you to finding new friends. But as most of the poems I know are limericks about... never mind, this isn't that kind of forum! :D
@Antti Lammi said:
I need parts for my wave, flathead screwdriver.Toivon, että löysit etsimäsi, ja olen iloinen, että löysit vielä enemmän. Arvostan kaikkea sitä, mitä olet tehnyt tehdessäsi Multitool.Orgista niin hienon paikan. Kiitos, ystäväni!
Def
-
@lazar said:
Been here for a little over 2 years, glad I found this place! Thanks for making and keeping this place the way it is!
I am glad you found this place too!
@lazar said:
This is my second 58mm Spydernox Mini Champ build. This time decided to make my own brass scales from scratch and also wanted the toothpick and tweezer slots. Took a lot of work with the dremel, files, grinder, sandpaper, etc. I like the look of the "brushed" brass, so I may not go full polish. Got some 1.5mm brass rods ready and peened one end.
Next, the blade. Most of what I've seen people do, is use a Honeybee blade, but they are made in China and I didn't want a chinese blade. I took a blade from a Spyderco Ladybug which is made in Japan. Peened in some brass rod into the pivot hole and drilled a new 1/16" pivot hole. Lined up a Vic 58mm blade with the Spyderco blade and use a sharpie to mark what needed to be ground away. Grinded it to the shape I wanted, hit the edges with some sand paper, then shaped the edge on a belt sander. Got it sharpened up and then put it all together. Not 100% satisfied with the edge on the blade, it's sharp, but not a good angle on the edge. Going to put some more work into the edge. Also took the ruler and made it into a wood saw, actually works really well for it's size. And for the regular Vic blade, I serrated it. Also, ditched the orange peeler blade and the cuticle pusher.
Enjoy!









Your first post was a pictorial, helping other people to mod their knives in spectacular fashion. If that didn't start you off on the right foot here I don't know what could! I appreciate this community, and I appreciate those who appreciate it- helping folks from the very start shows you belong here!
Def
-
@kirk13 said:
Happy 20th MTO! It's no small achievement for a forum to keep going that long. It's speaks to the quality and basic decency of everyone involved ( and Def, I've not forgotten that you contacted me directly offering an ear, from across the world twice; both through a mental health crisis, and through cancer last year. And you were not alone in doing that) from Def, through the mods and admins, and every member.15 years in by my reckoning.
Wonder whose to blame? Ain't me this time
I've got to disagree with you Kirky- you are absolutely one of the reasons this forum is the way it is! I absolutely blame you for that! :D
@kirk13 said:
Hello everyone!
I've joined the site after a welcome return to Swiss Army Knives!I've had or carried a knife of some sort since I was 12(first one was a single blades Wilkinson Sword bought for me by my dad),with my first SAK coming a few months later,bought in Switzerland.It was a 91mm Tinker which I had for 14years before some B******d stole it!
Been more into Leatherman tools recently,buying my first one back in '03,a PST which I still have and carry to work every day.
Found this site via SOSAK,after looking up SAKs on wikipedia,and seeing the footnote on modding.I've now re-scaled three Vic knives,with plans on 2 more,and would like to make a few scales of my own.I have a rough plan for my ultimate SAK which I may try to build later in the year.
SOSAK was a long time ago, and I am glad you made your way over here too. I don't honestly know if MTO would have ever been a thing if it weren't for the great friends and excellent support I got there, and SOSAK members will always have a special place here because of that.
Glad to have you man. Thanks for being a part of all this- no one can say you haven't had a major, positive influence here.

Def
-
@G-Dizzle said:
Happy 20th MTO!!![attach id=0 msg=2578266]
As I recall, you were pretty young when you joined up! It's been a pleasure being along for your journey man!
@G-Dizzle said:
I, gdoolittle, being of relatively sound mind and body, hereby entreat the powers that be to consider me for membership in good standing in the Swiss Army Knights and promise to place no knife before my trusty Swiss Army till rust do us part.Thanks for being a part of the madness here at MTO, and don't worry, we won't tell your lovely wife the shenanigans you got up to in the early days! :D
Def
-
@gustophersmob said:
Happy anniversary!Hard to believe it’s been around so long; certainly doesn’t taken that long ago since I stumbled across is (and SOSAK). Looks like I’m a few months shy of 17 years on this site

Only seventeen years? What took you so long? :D
@gustophersmob said:
Would these work?
http://lynncoins.com/Gold_BARS.htmPerfect thanks for the link!
I know this is late, but www.apmex.com usually has good prices.
Not only that, but your first post was spam! :D
You are lucky you escaped Benner's Ban Hammer in those days!
It's great to be able to mention that to someone who will remember that- most of the other members are reading that and being like
. 
Thank you for having been a part of this place for so long man. There's not too many of the old guard left, and I appreciate that you've been around for most of the ride. I hope we get to enjoy many more years reading each other's posts and reminscing about the good old SOSAK days!
Def
-
@Grant Lamontagne said:
As I recall, you were pretty young when you joined up! It's been a pleasure being along for your journey man!Thanks for being a part of the madness here at MTO, and don't worry, we won't tell your lovely wife the shenanigans you got up to in the early days! :D
Def
I sure was! Thanks Grant!
I have since gotten engaged, married, and had kids! I post way less now than I used to, but that’s just part of it.
What, you mean being on here at all hours when I was younger?
she’s aware 🤣 -
@Grant Lamontagne said:
Maybe not all twenty, but since 2017- that's a respectable presence for sure! You are closing in on the ten year mark!Now for the big question- are you still EDC'ing that Explorer, or have you moved on? :D
Def
Well, I still do but it didn't stay like an explorer for long. It became my first mod but I do edc it almost every day!
/post/1560397On another note, this thread and the fact that you take your time to answer everyone and looking up our stats and first post are something that makes MTO special!
-
@kottskrapa said:
On another note, this thread and the fact that you take your time to answer everyone and looking up our stats and first post are something that makes MTO special!
-
@magentus said:
Good to see you Fiddy
Sorry about your friend. I'm glad things are returning to normal for you@Barry Rowland said:

@nakken said:
Sorry for your loss, glenfiddich. Good to see you're back at it :)Thanks all!

@Grant Lamontagne said:
I think your logic may have been flawed- I was under the impression that you need three of something to be a collection, not two. I'm sorry to have to be the one to tell you this, but it appears you may have wasted the last eleven years!
You have to watch those websites that your friends tell you about- they can be very habit forming! :D
Def

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login