20th Anniversary Challenge
-
Day 3 of 30
Mini challenge with Center Drive, this is so great tool to have, i just need to change cutters for better ones
[attach id=0 msg=2578378]

-
Day 3 + mini-challenge.
A PST with hollow knurled screws.
[attach id=0 msg=2578379]
[attach id=1 msg=2578379]


-
Day 3 Mini Challenge
[attach id=0 msg=2578387]
July 4th and a multitool? Hmmm. Okay the first relative who made it over from the old country came in the 1770s.
There were three kinds of peasants in the old walled city of Rodenhausen. There were cow peasants. There were goat peasants. Then on the bottom rung were the goose peasants. Pretty self explanatory. Folks with more money had bigger livestock. I think my several times great grandfather got tired of feeding the geese and herding other people's cows. The usual way of getting out of Rodenhausen was through a grave beside the church.
So when a self-appointed Colonel came through the area to sign up young men for adventure, my relative signed on. Get a pretty green and red uniform. Go to the Colonies along with soldiers of Great Britain. Meet interesting people. And shoot them. Since Rodenhausen was and is in Hesse, the mercenaries were called Hessians.
Grandfather did what soldiers do until he got captured along with a whole bunch of others. When there was an exchange of prisoners, he decided that maybe he was on the wrong side. That is how he wound up as part of the Continental Army. After the war he settled down with people whose ways he understood in Lancaster, Pennsylvania. I'm not sure if he fed geese there and herded other people's cows.
At any rate, he and another soldier who was his companion moved south into Tennessee and got some land. Built houses. Finally when both of them got the traveling fever again, they wound up in what is now Western North Carolina.
The little iron tool is a hand made bullet mold from that former soldier or possibly one of his sons. It casts a round lead bullet of a little over 30 caliber. Pennsylvania rifle, pea rifle, whatever you want to call it. The rifle is long gone. A bullet cast in that primitive mold ends up with a long spout of lead or sprue. You have to trim that off with a knife and load the sprue end up to keep the bullet from becoming a 'knuckle ball'. Sprue up or straight down, either way. Sprue up is just easier. One handle has a hook and a sort of screwdriver looking tip. The other is a sharp point. Useful for picking burned black powder schmutz out to improve ignition. Small lead ball in a greased linen patch. The whole mess seated with a rod over a small charge of black powder. Take aim. Sploom. A big sulfurous smelling white cloud. Maybe meat for the family.
Best wishes, Gary (IMR)
[attach id=1 msg=2578387]

-
Thank you my friend!

@LoopCutter said:
Despite having this model and an assortment of other SIGNALs, your AQUA SIGNAL yet gives me goose bumps when you share.
-
Day 2
*
I love the organic feel of the original Stanley 99. Looks almost cetacean.* -
@IMR4198 said:
Day 3 Mini Challenge[attach id=0 msg=2578387]
July 4th and a multitool? Hmmm. Okay the first relative who made it over from the old country came in the 1770s.
There were three kinds of peasants in the old walled city of Rodenhausen. There were cow peasants. There were goat peasants. Then on the bottom rung were the goose peasants. Pretty self explanatory. Folks with more money had bigger livestock. I think my several times great grandfather got tired of feeding the geese and herding other people's cows. The usual way of getting out of Rodenhausen was through a grave beside the church.
So when a self-appointed Colonel came through the area to sign up young men for adventure, my relative signed on. Get a pretty green and red uniform. Go to the Colonies along with soldiers of Great Britain. Meet interesting people. And shoot them. Since Rodenhausen was and is in Hesse, the mercenaries were called Hessians.
Grandfather did what soldiers do until he got captured along with a whole bunch of others. When there was an exchange of prisoners, he decided that maybe he was on the wrong side. That is how he wound up as part of the Continental Army. After the war he settled down with people whose ways he understood in Lancaster, Pennsylvania. I'm not sure if he fed geese there and herded other people's cows.
At any rate, he and another soldier who was his companion moved south into Tennessee and got some land. Built houses. Finally when both of them got the traveling fever again, they wound up in what is now Western North Carolina.
The little iron tool is a hand made bullet mold from that former soldier or possibly one of his sons. It casts a round lead bullet of a little over 30 caliber. Pennsylvania rifle, pea rifle, whatever you want to call it. The rifle is long gone. A bullet cast in that primitive mold ends up with a long spout of lead or sprue. You have to trim that off with a knife and load the sprue end up to keep the bullet from becoming a 'knuckle ball'. Sprue up or straight down, either way. Sprue up is just easier. One handle has a hook and a sort of screwdriver looking tip. The other is a sharp point. Useful for picking burned black powder schmutz out to improve ignition. Small lead ball in a greased linen patch. The whole mess seated with a rod over a small charge of black powder. Take aim. Sploom. A big sulfurous smelling white cloud. Maybe meat for the family.
Best wishes, Gary (IMR)
[attach id=1 msg=2578387]Very interesting story and tool Gary

-
Day 3 Mini Challenge
Was issued this Gerber in an RFI (Rapid Fielding Initiative) prior to being deployed to Afghanistan in 2006. Had it with me on that deployment and the following deployment to Iraq. I RIT dyed the pouch green a while back (probably shouldn't have done that, but I'm not ever selling this thing).

-
DAY 3- Rotring and Knipex. :D
[attach id=0 msg=2578395]

-
- IMR4198
- glenfiddich1983
- AzteCypher
- WECSOG
- Kottskrapa
- PitCarver
- ReamerPunch
- Antti Lammi
- LoopCutter
- z1913
- Echotech
- ulzhan
- fullbreakfast
- MTSAK
- Fireman
- Barry Rowland
- BPRoberts
- Sos24
- Nonaute
- David Bowen
- JonesE
- lazar
- nakken
- SteveC
- David
- CampusSecurity
- zoidberg
- Crunchie64
- m47mu74nt
- Alan K.
- powernoodle
- TexasAKM
- gustophersmob
- Humayd A R Mahomedy
Might be all. I can't keep up. G
This might be the biggest challenge yet. :ahhh
-
Day 3, vintage stuff

-
@glenfiddich1983 said:
Day 3, vintage stuffThough it was released some four years prior to Cultosaurus Erectus, BOC's Don't Fear the Reaper was one of the great and enduring songs of the 1970s. It met later with renewed fame from the now-famous SNL cowbell skit.
https://www.youtube.com/watch?v=Dy4HA3vUv2c
https://www.youtube.com/watch?v=cVsQLlk-T0s -
@powernoodle said:
Though it was released some four years prior to Cultosaurus Erectus, BOC's Don't Fear the Reaper was one of the great and enduring songs of the 1970s. It met later with renewed fame from the now-famous SNL cowbell skit.Also one of my favorites!


-
Boom!

-
Day 3 :ahhh One big box opener!

-
Day 03

-
Day 3 - mini challenge- US made
Iβm mostly SAK person so I do not have that many US made knives/tools but I found some!
There is Case XX 9333 and Schrade 104OT (interestingly I did not get them in the US but from the EU GAW box π) and as well excellent US made Microplane grater which is now more than 15 years old and despite regular use still wickedly sharp - really great tool.
USA is very close to my heart - I happened to live there between 2009-12 (my company moved me there at that time) and both me and my family have very fond memories of our stay - we traveled a lot around the country, met some great people and overall really enjoyed it. I hope to come back some time - I would love to make a bicycle tour from west to the east.
So I am attaching pictures of the knives and grater with random selection of Americanas (the center piece is a plate from my US βhomeβ town - the one and only Chatham, NJ!)


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login
