20th Anniversary Challenge
-
Day 3 + my version of the mini challenge.
Good morning folks. I was rummaging through a bag of stuff, absolutely looking for something else, and found my old Deluxe Tinker. The DT is one of my favorites. ( If I could only add a fish scaler and drop one in my tackle box.)
Sorry, my mind tends to wander...
Like I said, this is my favorite large Victorinox.
Some years back, I ran across a guy that did scales for Swiss Army knives and I asked him to do a tire tread pattern. He'd never done one but this is what he did for me.
[attach id=0 msg=2578425]
I did remember the mini challenge for today. I'm assuming that the anything goes aspect still applies, so I grabbed up a piece of Arizona petrified wood. Made roughly 220 million years ago. I've been collecting petrified wood for a bit now, so enjoy.
[attach id=1 msg=2578425]

-
@Nonaute said:
"Cathedral" (Cathédrale, in french). A wooden sculpture made by my father. I'm glad to not be the winner, as I haven't got any idea about a mini-challenge to suggest for the next time :DCongratulations to you all guys !
Don't sell yourself short. I'm sure you could easily conduct a mini-challenge. Doesn't have to be elaborate. This is the first time someone has attempted to 'grade' the entries. I will toss off a couple of possible mini-challenge ideas off the top of my head.Challenge: Post a photo of a SAK a snack, and something in a sack.
Challenge: Post what you use to trim nose hairs. (I hope you don't use that huge brass hilted sword you showed us for that)
Challenge: Post a photo of a dog and something that could cut a log.
It is a one day break away from the usual routine of post a photo and write a little. With a day number. Should be fun. If it stinks, remember it is only a one day event. Nobody is required to participate.
You are doing fine for your first 30 day challenge. Relax and have fun with the other members.
Best wishes, Gary

-
@BPRoberts said:
I can see I'll have my work cut out for me today. For the sake of fine print (and not driving myself nuts):- Only entries posted and labeled "mini challenge" (or similar) will be judged. If you forgot to label, just drop another post or PM and I'll grab it.
- To account for time zones, I'll do the last round of judging and announce the winner tomorrow morning. Call it 9:30 EDT (~24 hrs from now).
Remember, as the winner, one of your duties as Mr./Ms./Mrs. (circle one) Independence Gear is to create a new mini challenge for next Friday (July 10th). We usually try to have them posted no later than Monday to give people time to prep, but Saturday or Sunday is fine too.
<u>JUDGEMENT DAY</u>
[attach id=0 msg=2578420]
kottskrapa: To the best of my knowledge (and if I'm squinting hard enough) that's a Style PS, which was made in America. AFAIK, all Leatherman tools (not accessories like sheaths) are made in America, though they may import some individual parts. That's a fine looking 'Cuda. What's the classic car scene like Sweden? G:3 P:3 B:3 Total: 9
You are right! It's a style ps
Thanks! There is a lot of classic cars in Sweden with a big culture around them, from young ones who driver around and drink a lot to older folks who keep them top notch. I read somewhere that there are more classic American cars per capita here in Sweden than in the us
-
Day 3
Mini-challenge
A simple CASE Muskrat
[attach id=0 msg=2578429]I was drawn to the MUSKRAT pattern because my father always carried a black handled two bladed knife in his pocket as long as I have a memory.
Did not know the pattern name, just it had to blades. MTo did not become part of my world until 55 years later.
Knowing my dad, a sensible sort, he carried a knife with two blades because if one became dull he would close it open the other side. Handle was same, blade the same, no adjustment required.
My dad past in 2003, (iirc), knife was forgotten. I still remembered the two identical blades and I learned a MUSKRAT is the pattern.
My mother passed a couple years back, cleaning up, in the old junk drawer dad’s knife was found, unrecognizable, my guess it fell out of his pocket, laid in the driveway and was ran over several times by vehicles coming and going, so that driveway had to be down at the farm. As ours was asphalt at the house.
No scales, just the frame, pebbles and dirt between blades. It was a tad larger than this example I pictured. It was a SCHRADE WELDON per the tang. It was trashed🥲My first CASE MUSKRAT. A Navy Blue Jig Bone with red shield was a birthday gift to my younger brother when I learned he did not own a pocket knife. The Red example is my second one I purchased. Today will be the first day in my pocket. 😉

-
NOT EXACTLY A MINI-CHALLENGE
Something new. Some time this month post a pet photo. Dog. Cat. Snake. Mouse. Don't take a photo of your snake eating the mouse. Geck! A nice photo with some sort of tool or knife would be fine. Any time you choose.Best wishes. Gary (IMR)
-
@LoopCutter said:
Day 3Mini-challenge
A simple CASE Muskrat
[attach id=0 msg=2578429]I was drawn to the MUSKRAT pattern because my father always carried a black handled two bladed knife in his pocket as long as I have a memory.
Did not know the pattern name, just it had to blades. MTo did not become part of my world until 55 years later.
Knowing my dad, a sensible sort, he carried a knife with two blades because if one became dull he would close it open the other side. Handle was same, blade the same, no adjustment required.
My dad past in 2003, (iirc), knife was forgotten. I still remembered the two identical blades and I learned a MUSKRAT is the pattern.
My mother passed a couple years back, cleaning up, in the old junk drawer dad’s knife was found, unrecognizable, my guess it fell out of his pocket, laid in the driveway and was ran over several times by vehicles coming and going, so that driveway had to be down at the farm. As ours was asphalt at the house.
No scales, just the frame, pebbles and dirt between blades. It was a tad larger than this example I pictured. It was a SCHRADE WELDON per the tang. It was trashed🥲My first CASE MUSKRAT. A Navy Blue Jig Bone with red shield was a birthday gift to my younger brother when I learned he did not own a pocket knife. The Red example is my second one I purchased. Today will be the first day in my pocket. 😉
I think that was the idea behind the Muskrat pattern. Sharp point made a good 'opener' for furs. Dull it out, switch blades and keep at it. Did you ever see the CASE Hawbaker muskrats? Nice red example. Very pretty. Best wishes. G
-
Day 3
Forgot my Nitecore flashlight in the pocket.
[attach id=0 msg=2578441]

-
Good morning. Day 3. Trying to get 8 hours in to bail for the weekend.

-
Day 3 + Mini challenge
This is my US-made PocketWrench II. It was first imported to Ireland by our good friend McStitchy, then shipped to me in Norway as a gift. In addition to that, it weighs 47 grams which is the country code for Norway. Coincidence?
I think notProbably
[attach id=0 msg=2578443]
(1)%20(1).jpg)
-
@IMR4198 said:
I think that was the idea behind the Muskrat pattern. Sharp point made a good 'opener' for furs. Dull it out, switch blades and keep at it. Did you ever see the CASE Hawbaker muskrats? Nice red example. Very pretty. Best wishes. G

No, I have not heard of or knew of a HAWBAKER Muskrat by CASE. Well a search will be scheduled.
Thank you, when I first saw I thought this was a WIRKMAN Red. Nope. It is a SparXX Red! Kind of winks at you.
PS: My brother luvs his NAVY BLUE JIGGED BONE version. I gifted it to him as it was dad’s pocket knife. I later gifted him the next years dad’s small fix blade he took deer hunting, a WESTERN. The initials scratched into the leather was a match. My brother has no middle name and dad did use his. -
Nice photo. Best wishes. G

-
<u>JUDGEMENT PART 2!</u>
[attach id=0 msg=2578448]
Pitcarver: Assuming those scales were made in the USA, I'd rate that Deluxe Tinker as perfect for the mini. A Swiss knife with American scales! The wood is cool too. G:4 P: 2 B: 3 Total: 9
Loopcutter: As someone who prefers opposite end openers on trads, I like a good muskrat, though I go for the "improved"/moose (or Hawbaker as Gary has just taught me they were awlso called) variant. I prefer different blades for more versatility, but I awlso admit it's pretty rare for me to wear a blade out and not be able to touch it up easily. Shame about your dad's knife. I wonder if Case would've fixed it up if it'd been one of theirs and you sent it in. I awlways love a good, "this was my dad's knife, I threw it into the sun and Buck warrantied it from 3 atoms no problems!" story. G:2 P: 2 B: 3 Total: 7
Nakken: The Pocket Wrench is a tool that's begging for a revival, and (I imagine) so easy to make. I wonder who has the patent now. I like how you included some non-pocket wrenches for comparison. G:3 P:3 B:3 Total: 9
In regards to the 47:
[attach id=1 msg=2578448]

-
Day 3:
Today’s carry.

-
@IMR4198 said:
Don't sell yourself short. I'm sure you could easily conduct a mini-challenge. Doesn't have to be elaborate.It doesn't have to be, but it can :D
I have an awesome idea for a challenge, but I have to win one to host one (and grade the one I host?), so I may have to use my idea in a future challenge.Also, the badge is pretty much ready. I'll post it tomorrow when I'm off work.

-
@gustophersmob said:
Day 3:Today’s carry.

-
@PitCarver said:
a piece of Arizona petrified wood. Made roughly 220 million years ago.That's gonna be a smurf of a lifetime warranty.

-
@BPRoberts said:
Nakken: The Pocket Wrench is a tool that's begging for a revival, and (I imagine) so easy to make. I wonder who has the patent now. I like how you included some non-pocket wrenches for comparison. G:3 P:3 B:3 Total: 9
I am surprised no one has jumped on it. Hey, Grant!
Wally was here! -
Day 3:
Here is one of my absolute favorite knife/tool : a little fixed blade that allows to use your 10 fingers while still holding the thing in your hand (one finger being shoved through the hole). I am talking about LaGriffe, an original design by French knife maker Fred Perrin from the very beginning of the 90's (LaGriffe and were born in the same years
).
In 1999 Fred and Ernest Emerson released a made in USA variant, with the very distinctive Emerson chisel grind.
American craftsmanship based on a very French design, seems like it follows the rules ![attach id=0 msg=2578465]
The one on the picture is a stonewash variant from 2024. Paracord wrap is mine, and the leaded Paracord whip below is my own design.

-
I must say this is one of the years highlights! There is no other challenge that brings so many of us together and so much talking in between the days posts. I know I'm not the best talker myself but I do read and enjoy it.
Cheers to you awl
-
Day 3 and mini challenge.
Rebar and a Camillus made Barlow for KeenKutter.
[attach id=1 msg=2578467]
Camillus made more knives for the WW2 effort than any other cutlery company. They made knives of all kinds and patterns including kitchen knives, scalpels, machetes and more.
[attach id=0 msg=2578467]
They made a total of 14,895,881
http://www.collectors-of-camillus.us/History/Camillus-Military-1941-1945s.pdf


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login