20th Anniversary Challenge
-
Day 03 and Mini Challenge
Case Trapper Jr. in pink digital camo. The family came from Poland where they were well known furriers, making coats for military officers. They may have used knives like this to cut the animal skins they worked with, although, admittedly, they probably didn't have pink digital camo.

-
@BPRoberts said:
m47mu74nt: I would say it follows the theme perfectly! I've seen a few of these little "claw" knives before, but never had someone explain the use case so well. Might have to look into one. G:4 P:2 B:3 Total: 9Makes me see that I forgot the most important thing, its name, "La Griffe", is French for "The Claw"
-
@IMR4198 said:
Don't sell yourself short. I'm sure you could easily conduct a mini-challenge. Doesn't have to be elaborate. This is the first time someone has attempted to 'grade' the entries. I will toss off a couple of possible mini-challenge ideas off the top of my head.
Challenge: Post a photo of a SAK a snack, and something in a sack.
Challenge: Post what you use to trim nose hairs. (I hope you don't use that huge brass hilted sword you showed us for that)
Challenge: Post a photo of a dog and something that could cut a log.
It is a one day break away from the usual routine of post a photo and write a little. With a day number. Should be fun. If it stinks, remember it is only a one day event. Nobody is required to participate.
You are doing fine for your first 30 day challenge. Relax and have fun with the other members.
Best wishes, Gary

:D
Thank you Gary !
I have to be careful, I've got a lot of ideas, but I always have to stay vigilant, because I need to follow social rules that are foreign to me, so I always have to be careful about what I ask for :D
Thanks to you for your help

-
@ReamerPunch said:
I may host mine later, maybe after the half-point.
I'm the one who schedules all the challenges. It doesn't have to be complicated. It does NOT have to be graded or judged. That sort of thing can discourage people from joining in. Hosting a mini-challenge has never been about winning something. Once I just asked whoever wanted to do one to contact me and I would oblige. Other times I appointed the first one (or did it myself) and then asked the person who ran the first challenge to choose someone on their own. We don't have jump ins. Why not? Because I am the only one who knows when all the stuff is scheduled. If people jump in on their own we would have conflicts and chaos. If you want to run a mini-challenge, maybe someone will ask you. Or, you can ask me to schedule one for you when it won't disrupt other activities. I will work you in on some day besides Friday or when another event is due. I will guarantee you an opportunity to do whatever you want. Probably will be within the last two weeks. Send me a PM if you want to play. Others can have the same opportunity.Best wishes, G

-
@Antti Lammi said:
Day 3 of 30Mini challenge with Center Drive, this is so great tool to have, i just need to change cutters for better ones
[attach id=0 msg=2578378]
Apparently there are cutters that will fit in there, that are very tough. maxlvledc called the inserts "American Made speed steel cutters". i do not know what the brand or part number is, but hopefully someone can post more information on these. He mentions them in this video, around 21:53
-
@m47mu74nt said:
Makes me see that I forgot the most important thing, its name, "La Griffe", is French for "The Claw"Incidentally, it has a two-fold meaning : "the claw", and "signature". :D
-
@Frenchephaistos said:
Incidentally, it has a two-fold meaning : "the claw", and "signature". :DNever thought about that, but that's true

-
I forgot to thank our friend ReamerPunch for his work on making us a badge for the 20th Anniversary Challenge. He deserves all the praise for his contribution to so many of our challenges. Also with his creativity, he has been the architect of many of our challenges themselves. You only have to go down the list of awards to see which ones were either started by him or have a badge designed by him.
The first challenge I ever did was the Country of Origin Challenge. Totally the brain child of ReamerPunch. Unfortunately he ended up in the hospital for an extended stay and couldn't contribute to it. If I'm not mistaken, he took the opportunity of a challenge I hosted (another Anniversary?) to fulfill the requirements for his own Country of Origin award. Just last year I asked him if he would make a badge for the Big Blades challenge. In spite of our not having the minimum required 10 people in the challenge, he pitched in and made us a badge. A nice one at that.
Best wishes, G

-
@m47mu74nt said:
Day 3:
Here is one of my absolute favorite knife/tool : a little fixed blade that allows to use your 10 fingers while still holding the thing in your hand (one finger being shoved through the hole). I am talking about LaGriffe, an original design by French knife maker Fred Perrin from the very beginning of the 90's (LaGriffe and were born in the same years :cheers:).
In 1999 Fred and Ernest Emerson released a made in USA variant, with the very distinctive Emerson chisel grind.
American craftsmanship based on a very French design, seems like it follows the rules ![attach id=0 msg=2578465]
The one on the picture is a stonewash variant from 2024. Paracord wrap is mine, and the leaded Paracord whip below is my own design.
I recalled it was not originally a FRENCH design but from INDONESIA.
My cousin (actually my dad’s), served in SE ASIA IN 60s and 70s, had a fixed blade it bit larger that compliment his 7” BUCK119 for certain special needs.
He said his was a gift from a foreign soldier he served with in his task force.
I also recalled many years later when following EMERSON BLADES, I saw they released a similar knife but a folder.
They called it a KARAMBIT. I was actually surprised I remember as much as I did and confirmed there was info on their site. Including YouTube videos.
Emerson Knives, Inc. | Official Website
American-made, high-performance folding and fixed blade knives crafted for reliability, precision, and excellence. Proudly 100% made in the USA.
Emerson Knives, Inc. (www.emersonknives.com)
The finger hole I found interesting can be used with the blade held either way and solely for purpose of tool retention.
My cousin indicated it served him well in hand to hand situations. The 119 was better in sleathy operations and other normal knife needs. Unfortunately he succumbed to chemical exposure cancers about 25 years ago before the VA was authorized to treat such types of cancers. J
-
Karambit have their finger hole at the back, and the blade is shaped differently, the knife is held and used very differently.
They share "having a hole for a finger" but that's all.Fred's La Griffe is usually offered with a Wharncliffe blade (instead of the slightly "hawkbill" one of the Emerson's variant)
Fred did not create the "finger hole concept", he designed a small fixed blade with a hole for your index finger that you can IWB carry
-
Thank you Gary !
I have to be careful, I've got a lot of ideas, but I always have to stay vigilant, because I need to follow social rules that are foreign to me, so I always have to be careful about what I ask for :D
Thanks to you for your help

Many people enjoy the challenges (and sometimes the mini-challenges if any are available). If you want to host your own mini-challenge, I can find a date for you. Or if you have questions about whether the theme you choose is problematic, we can work it out. Either way, enjoy your time with us on our 20th Anniversary. Best wishes. G

-
@Alan K. said:
Day 03 and Mini ChallengeCase Trapper Jr. in pink digital camo. The family came from Poland where they were well known furriers, making coats for military officers. They may have used knives like this to cut the animal skins they worked with, although, admittedly, they probably didn't have pink digital camo.
Nice CASE. I like the junior sized trapper concept a lot. Two good sized blades in a small package. I appreciate the family story as well. Best wishes. G
-
Day 3 and Mini 1
Took a couple tries to get some decent lighting, but here's my piece for today.
This Boker is double marked. The shield and tang stamp are US, but the blade etch says "Made in Germany." Myron's blog says that means it was made in the US, then sent to Germany for assembly when the US factory shutdown. My mom's side of the family has a lot of German, so it's cool to have a hybrid knife like this. I awlso have a few Italian and a ton of Irish knives (the Irish Imperials are well made for the price you usually find them at) that might come out to play at some point.
[attach id=0 msg=2578503]
Let's mix up the JUDGE a little.
[attach id=1 msg=2578503]
Crunchie64: I have a serrated stockman that I take when we travel for food prep. Blazer? I think. I'll have to post it later this month. The Europe 75 is a clever choice for the theme. Hope we see some great pics of the trip! G: 4 P: 2 B: 3 Total: 9
Alan K.: You always hear about the Prussian Blue, but never the Polish Pink. It's just not fair. Never seen a Case like that. It's awlways fun when someone mixes traditional and modern style. G:3 P: 3 B:3 Total: 9


-
Day 3
Not seeing my post, if it's been done this is my double 😉
[attach id=0 msg=2578514]

-
Your earlier number 3 post and photo showed up fine on my computer. Don't know about anybody else. Best wishes. Gary

-
@IMR4198 said:
Your earlier number 3 post and photo showed up fine on my computer. Don't know about anybody else. Best wishes. Gary

Good to know, couldn't find it for some reason when I was checking to see what others had posted for the day.
Awesome carries btw everyone. I wish I could commit to a slippy as much as my heart wants to.
-
Day 3.
I am running extra late today and rushing to get a photo in. Today’s carry was the Camillus scout knife and the Leatherman Wave with the advertising for Cabela’s. Both are made in U.S.A. Not sure if this qualifies for the mini challenge. This week is moving by so quick. Just trying to catch my breath.
JonesE
-
<u>Day 3 - Mini Challenge</u>
This is my Schrade Tough, ST1, multitool. This tool is special to me because it was given to me by one of my bosses while I was at Uni. His name was Ed. Though I knew general house maintenance, and auto repair because of my dad, Ed taught me how to work on commercial bits. We used to be the maintenance crew at my dormitory so he taught me plumbing, electrical, a/c and chillers, and how to work on huge sand filters that were used on the pools. I swear there was nothing Ed didn't know how to do.
When I didn't have a place to sleep, because I was too proud to ask for help (financial or otherwised) Ed offered me a place at his house with his family. That's the kind of person Ed was.
The Schrade has been retired for many years now but I do break it out from time to time.
The ST1 was made by Imperial Schrade Corporation in Ellenville, NY before Taylor Brands bought them out. Ellenville was orginally called "Socconessing" by the Esopus Munsee which were a subgroup of the Lenape Indians. It means "a muddy place where the water comes out." Alpheus Fairchild bought the land in 1798 and named the community "Fairchild City." Later, at the Hoornbeek Tavern, village leaders were persuaded by Ellen Snyder to name the village after her. I wonder if I convince the town we live to name it after me....


-
Day 3
A bishcraft satchel with the tools that stay in it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
