20th Anniversary Challenge
-
@LoopCutter said:
Day 8MTo = information and knowledge.
Without MTo I would have completely ignored the SOD BUSTER pattern!
[attach id=0 msg=2579366]
Something I never knew I needed! Seen them in display cases at hardware stores, usually black. But never really pondered ownership of such a simple boring object

It is one of my favorite patterns.
@IMR4198 said:
The FFA boys in high school all wore the blue corduroy jackets with their names and the big Future Farmers of America crest. One of the agriculture teachers sold Brown Mule sodbusters, so they almost all had one of those. Very inexpensive at that time. Made by Klaas (Kissing Crane), Solingen.
One of my buddies who sold knives on the side in his barber shop had some strange sodbusters. They were Carl Schlieper, Solingen (Eye Brand) but they were huge. The handles were made with stripes like a zebra or spots like some kind of other animal. He said they were export models sent to Africa. Like a fool, I didn't buy one.
Best wishes, G

Great story. I remember those FFA jackets. I think our school had as many if not more boys wearing those than varsity jackets.
-
@Fireman said:
MIDWEEK MINI CHALLENGE!Sixteen years ago on July 9th I was on my way to visit a wounded young Marine at Bethesda Naval Hospital. Once there, We learned that his best friend had been KIA on the 9th. I have never forgotten the name of that young Marine. All you need to do is post the name and service branch of someone wounded or killed in action that you want to remember. If you want to just say "Uncle Fred, USN" that's fine with me, but you can post more.
I will randomly choose someone who posts to receive a relevant 58mm SAK plus whatever else I throw in. If you live outside the US, I may need some assistance figuring shipping, customs, knife laws.
Post by end of day 7/8, and I will try to notify the recipient on 7/9.
For Hal, KIA in Desert Storm.
Tim, WIA, Afghanistan, and his friend Gabe who was KIA. -
-
@Farmer X said:
Where did you find that mini four-way wrench?If I’m not mistaken the four way wrench is commonly called a silcock key.
@Farmer X said:
One of my fellow Sailors aboard USS Lake Champlain was on board Cole at that time (which was just after I got out of boot camp). Understandably, he did not like to talk about it.I’m not surpised your shipmate didn’t want to talk about it.
Because I went to Department Head school just a few months later, we has a Chief who had been onboard and rode the COLE back to the US talk to us. It was hard hearing so I can’t image actually being onboard. -
Day 8
A few of my more frequently carried and used flashlights.I confess, i think my flashlight collecting is as bad if not worse than my SAK one.

-
Day 8
Well the other day, I picked up a SAK just because of the scales. Today, I picked up a SAK simple because it lacked scales (well one scale). I have had a set of the Woodland Camo scales sitting here for a while now. I really like the Huntsman pattern like the Sea Camo one shown. Kept looking for a donor SAK to pop up at a price that was reasonable without any real damage that wasn’t cosmetic. So it arrived after a long week in transit. Popped the remaining scale and gave it a good cleaning with isopropyl alcohol. The aluminum liners had dings, so I sanded them out. It looked good so I ended up going to a finer grit and polished them up. Flushed out the sanding debris with more alcohol and then blew it out with compressed air. Installed the new scales and sharpened up the main blade and lubed the joints. Should be ready now for its second life.
JonesE
-
Day 8:

-
Nice combo today gustophersmob. Really like the matching scales on the SAK and Griptilian.

JonesE
-
Day 8
Some of the tools I use at work.
[attach id=0 msg=2579434]

-
@glenfiddich1983 said:
Like that Opinel!
Careful not to cut right through the entire roll :DI didn't slice through the entire roll but my wife did wonder what had happened to another roll where half the sheets had an "extra" perforated edge.

-
@glenfiddich1983 said:
Day 8Over half of my entire collection is on this single picture. The rest of the knives and tools are scattered through the house and some are in a separate display.

Special attention goes to the MTo Multitool of the Year 2016:

@LoopCutter said:
I have the same delima.A small part of my sharps are on display,
[attach id=0 msg=2579396]The remainder are scattered in the family room on the end tables or former TV trays.
And another large gathering is stored in a multi drawer dresser in cartons originally received with.Great (part) collections guys

-
Thank you

-
Day 9
A couple of Christy sliding knives today, neat little units but can’t say I ever use them

-
@Farmer X said:
Where did you find that mini four-way wrench?@Sos24 said:
This reminds me of the other day when my wife and I were waiting in the pharmacy drive thru. She points to a facet and says how it looked strange. Somewhat had used a silcock key to open a d then left it on. I laughed then told her what it was and that there was one in the emergency backpack in the back of the car@Sos24 said:
If I’m not mistaken the four way wrench is commonly called a silcock key.I called it a water key but have also heard sillcock, electrician, cabinet, gas, elevator, universal etc etc.
This key was a gift from one of our australian brothers back when I serviced water systems.
However you should be able to find them in a hardware store or online pretty easily.
I too have one in the truck.Bike maintenance today.
Nice set. What type bike?
-
DAY 09:

-
Day 9
Still out camping, use this light stove for coffee in the morning and today when hiking so we can get som lunch. For dinner I have the same 2 burner primus stove from when I was a kid
[attach id=0 msg=2579458]

-
***Day 9. ***
Here is the tool I use most at work. And next to it, the "Châtellerault."
The Châtellerault is the traditional french folding pocket knife from the town of the same name.
Dating back over 200 years, it has distinguished itself and endured through the ages with its majestic, instantly recognizable design. Its dagger-like shape retains a pointed guard and a flared, fish-tail-shaped rear bolster made of solid stainless steel. It features a 10 cm stainless steel blade, and its straight handle is available in various materials, ranging from traditional horn to a variety of wood types.
[attach id=0 msg=2579461]
[attach id=1 msg=2579461]


-
-
Here is the tool I use most at work. And next to it, the "Châtellerault."
The Châtellerault is the traditional french folding pocket knife from the town of the same name.
Dating back over 200 years, it has distinguished itself and endured through the ages with its majestic, instantly recognizable design. Its dagger-like shape retains a pointed guard and a flared, fish-tail-shaped rear bolster made of solid stainless steel. It features a 10 cm stainless steel blade, and its straight handle is available in various materials, ranging from traditional horn to a variety of wood types.
[attach id=0 msg=2579461]
[attach id=1 msg=2579461]
I have never seen one before! it looks good!

-
Day 9
Grand Harvest 26-SW
Also, why hasnt Gerber released a MP400 with shears instead of pliers?

Maybe with a rescue blade and a rescue hook on the outside, a few tools inside. It would have been a nice tool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

