20th Anniversary Challenge
-
I am so sorry David. You and your daughter are in our thoughts.
JonesE
-

@IMR4198 said:
I have been riding the yellow thing around in circles.What model is your Cub Cadet? That question may or may not be related to the business I plan to start.

@Barry Rowland said:
Bear and Son today.I'm thinking my Bear and Son might make an appearance tomorrow.
Sorry to hear of your loss.
Day 11
I resurrected the Swiza Saturday thread for today's post.
[attach id=0 msg=2579869]
The photo shows my D04 with all its bits open. Its tweezers are reminiscent of those on a Wenger, but the other tools tend more toward Victorinox in appearance. Being positioned on the same pin as the blade, the cap lifter's wire stripper notch is of questionable utility.
In last year's SAK-Alike challenge, I had this to say:
@Farmer X said:
For those tempted by a Swiza, this may give you pause: Knife Center sells a new D04 for $61. That's twice what they sell a Tinker for, and a few bucks more than a Picnicker. My preliminary assessment is that you'd have to really like the shape, the sorta rubbery scales, and/or the supposed dishwasher safety to justify such a price premium.That remains true. The Swiza is kinda a neat alternative to SAKs, but I think the average user will find the price premium at least a little hard to justify.

-
All good things...
Just got home from a visit to the ER. Spent a couple days in the hospital. I'm hoping that I can make up the missing days in the 20th Anniversary Challenge. -
Sorry to hear you had a visit to the ER. Hope awl is well and wish you a speedy recovery. I think you can just pick up where you left off and continue on. Take care, JonesE
-
<u>Day 11</u>
Picked a few peas.
The pyramids I made earlier in the month are doing the job.
[attach id=0 msg=2579878]

-
Yes it's 100° out and the dogs have jackets 😆 They just got haircuts and it's too cold in the house. They shiver if we don't put them on.
And when I mentioned the other day about being a Poppy X3, my daughter lost the baby 😔 She's heartbroken, feel so bad and it's something I can't make better.
[attach id=0 msg=2579835]
My condolences David
-
Sorry to hear, David.
Day 11
Opened some Swedish Fish for my wife.

-
Welcome back, friend Pit. About the Cub. This thing is an Enduron series, 42 inch deck, 18 hp Kohler. Lawn equipment has gotten lots more expensive in the last 10 years. This isn't a commercial grade mower and still cost $1800. The Cub dealer is close to my house and has a service department. Last mower I had before was a Troy Bilt. It quit after 4 years and they have no service facility at Lowe's where I bought it. Commercial grade mowers come with a substantial sticker shock.
Lots of people start out doing lawn service with a pickup, trailer, and whatever lawn equipment they can muster. Then they buy good equipment when they can. At least that's how they do it here.
Good to see a Swiza here. There doesn't seem to be a bunch of them on the site. I downloaded their catalogs through the years to see what they had. They are more expensive and don't seem to be distributed very widely. Nice one.
Best wishes. G

-
@gustophersmob said:
Day 10:My favorite pew pew. I love .22lr, and this is my favorite plinker.
Cool blaster!
I'm a fan of 22 lr's, I own a Browning Challenger and a Brno Mk2 rifle.Day 10
The days got away from me, as they do.
I don't follow team sports, so I don't have any team memorabilia, but I do have some "stuff".
My son bought me a few Reg Park plates for a birthday some years ago, the 1 1/2# plate was a single, it's a nice paperweight.
I lift weights to keep in shape these days.The Bow was my first, got it Dec 1990, shot it until the limbs cracked, PSE warrantied it, back in 2010, IIRC [ I got an 80# Omen, paid the difference. I was stronger then ::)]
[attach id=0 msg=2579883]Day 11
My old faithful Timberline pen has been with me for 18 or so years.
[attach id=1 msg=2579883]

-
Day 11. Wife is out of town. So, I am doing house things.

-
-
@gustophersmob said:
Day 10:My favorite pew pew. I love .22lr, and this is my favorite plinker.
That is a nice one. .22 is fun to shoot.
@PitCarver said:
All good things...
Just got home from a visit to the ER. Spent a couple days in the hospital. I'm hoping that I can make up the missing days in the 20th Anniversary Challenge.So sorry. I hope everything is ok, or at least nothing serious.
Bike tools.
Nice set-up
@Barry Rowland said:
Day 11: Bear and Son today. This one has a clip that won't quit!
Love that color
Yes it's 100° out and the dogs have jackets 😆 They just got haircuts and it's too cold in the house. They shiver if we don't put them on.
And when I mentioned the other day about being a Poppy X3, my daughter lost the baby 😔 She's heartbroken, feel so bad and it's something I can't make better.
[attach id=0 msg=2579835]
So sorry for your daughter and you. I know it has to be hard as a father not to be able to fix your child’s pain
@LoopCutter said:
Day 11Sharing time with a BARLOW and a SUPERTool
[attach id=0 msg=2579836]
(It is also ST Saturday!)
Beautiful Barlow
-
Day 11
Used the scout knife today to free today’s latest haul. Picked up the cheapest most serviceable Vic Champion Plus I could find on ePrey. I also ordered a sheath for it since it seems to be too large for pocket carry. For some reason the new sheath looks really red in color to me. We’ll see if it darkens in time to a more brown color. As for the Champion, tomorrow I will start the cleaning process and go from there.
JonesE
-
I tried to post this photo with my answer about the Cub, but the internet has been off. Again. I know it's a boring photo. Yawn and move on. Best wishes. G
[attach id=0 msg=2579901].jpg)
-
My condolences to your family David.
Day 11
Two early multitools, the Leatherman PST and the Gerber Provisional Tool.

-
Day 11
Using a pattern I bought of Etsy, I made a small ultralight dog bowl for walks. The Barlow was sharp enough to cut the dyneema and did ok if I used the round edge near the tip, kmowing how quickly it dulls blades, I switched to a disposable scapel I use for crafts. I did use the Barlow to cut the tape. The Mini Flagship scissors were used to cut the thread and elastic cord. It holds less than 1 cup of water, but works great for hetting Fisher to drink during activities.
-
Day 11
Double post since I put the wrong pic. What is this mystery?

-
Day 12
Skeletool Sunday, hanging with crew

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

