20th Anniversary Challenge
-
Day 20
A big part of the MTo family and its success is due to the generosity of the members here. This site is a global community and it exhibits tendencies that shares members talents freely.
This feeling has touched me on more than one occasion;
A ORIGINAL SuperTool Sheath was sent and received from a member. Says it was an extra needing a home.
[attach id=0 msg=2581351]A 2nd gen WAVE, arrived, an unexpected gift from a member who I consider a friend.
[attach id=1 msg=2581351]And, then there are GAWs, often just out of shared kindness, other times to encourage members to be involved with a little incentive. Or just participating and interacting within the community.
My name came up when this custom SAK was offered and,
[attach id=2 msg=2581351]
built by pa_stunk as the prize.A one of a kind! Built with EXECUTIVE implements, plus an ink pen!
A community that gives and gives never expecting anything in return.
That is why 20 years is just the beginning.



-
Day 20
"This" is not a pipe.

-
Carrying the Kroc 329 today along with various bits of kit in that Alpaka pouch. I have lots of fancy lights but this cheap Nitecore is one I keep going back to.
Wonder how I'm going to be in this challenge next week? I'll be on a cruise ship headed to Mexico. Guess I can show my watch and whatever I'm allowed to carry 😉
[attach id=0 msg=2581334]
When I have traveled via a cruise ship, I have never had an issue with a 58mm SAK. I pack in my checked bag as it is not excepted by TSA at the airport. A JETSETTER may be acceptable, if the agent is in a good mood.
No problems experienced on the ship, even when after a port visit and bag scan reboarding in my day sling or back pack.
As Gary mentioned, watch, ink pen, sun glasses, a flashlight, beverage, or an even a meal photo or landscape.
Share, and have fun.
I even noticed some beach attire were of same colors as my favorite SIGNALs, AQUA & Guava were very prevalent a year ago in MEXICO 😁😉😎
-
I'm wondering if, at day 20, it's too early to begin thinking about the next challenge.

-
Day 20
Here's an old can of Hercules 2400, my go-to powder for .44 Mag. Old as it is, the powder inside is still good.
Next pic, since Echotech displayed a couple of Higonokami knives, here's mine with my Opi No. 12.

-
@ReamerPunch said:
Day 20Roxon Flex Shears S505G.
This is good. It has a few improvements over the model with just blade and shears: three modular short tools, better access to the blade thumbhole, improved switches that disengage the scale to remove the blade, better backsprings for the shears. But it is quite thicker and heavier, and the pocketclip now rests on G10, so it is not easy to slide in a pocket.I've taken this in and out of my cart a few times. It looks similar to carrying a 111mm SAK. Is that a fair comparison?
-
DAY 20: I started this challenge with an illness that is still ongoing. Hoping to finish it and the challenge before it finishes me.
I hit the inhaler an extra time and ventured out to take on the weeds. Here's a pic of the saw I was using to prune a tree, and you can see the tightly wrapped bandaids where I sliced my finger on a razor sharp bit of broken porcelain. :D[attach id=0 msg=2581369]

-
🤠

-
@BPRoberts said:
I've taken this in and out of my cart a few times. It looks similar to carrying a 111mm SAK. Is that a fair comparison?Kind of. It will be of comparable size to a 4-layer one.
It does have massive shears, a pocket clip, a modular large blade, and three short modular tools. I wish it had scale tools, but maybe future versions will.
To get the most out of the modularity, you will have to get additional tools. It does come with the utility blade holder and claw can opener as addons.The quality is definitely there. The scissors are amazing, the blade swaps perfectly, no rattle, no play, the short tools swap in seconds as well, and the system is very refined. All implements but the shears are one-handed. You might not like the design/weight/size, but the execution, the fit and finish, those are simply excellent.
I do like it, so I do recommend it. But it is a bit wide and heavier than the previous version which only had the blade and scissors.
Maybe order it, and if you don't like it just send it back in a week?
-
@Fireman said:
DAY 20: I started this challenge with an illness that is still ongoing. Hoping to finish it and the challenge before it finishes me.
I hit the inhaler an extra time and ventured out to take on the weeds. Here's a pic of the saw I was using to prune a tree, and you can see the tightly wrapped bandaids where I sliced my finger on a razor sharp bit of broken porcelain. :D[attach id=0 msg=2581369]
I know you started this challenge with such enthusiasm. Illness takes the joy out of things. Don't overdo. Best wishes. Gary

-
Day 20
I have had this for years and it works great but one button started to get a hole, so I ordered a new front and change it. Chinese but good fit
[attach id=0 msg=2581382]

-
@ReamerPunch said:
Kind of. It will be of comparable size to a 4-layer one.
It does have massive shears, a pocket clip, a modular large blade, and three short modular tools. I wish it had scale tools, but maybe future versions will.
To get the most out of the modularity, you will have to get additional tools. It does come with the utility blade holder and claw can opener as addons.The quality is definitely there. The scissors are amazing, the blade swaps perfectly, no rattle, no play, the short tools swap in seconds as well, and the system is very refined. All implements but the shears are one-handed. You might not like the design/weight/size, but the execution, the fit and finish, those are simply excellent.
I do like it, so I do recommend it. But it is a bit wide and heavier than the previous version which only had the blade and scissors.
Maybe order it, and if you don't like it just send it back in a week?
I have (guessing) about 80% of the implements from other Roxons, so that's not an issue. They like to do a lot of sales and bundles, so I'll probably grab it next time I put an order together with them.
@Fireman said:
DAY 20: I started this challenge with an illness that is still ongoing. Hoping to finish it and the challenge before it finishes me.
I hit the inhaler an extra time and ventured out to take on the weeds. Here's a pic of the saw I was using to prune a tree, and you can see the tightly wrapped bandaids where I sliced my finger on a razor sharp bit of broken porcelain. :D[attach id=0 msg=2581369]
Fireman finishing this challenge:
https://www.youtube.com/watch?v=VYPsoxpt0BU -
@kottskrapa said:
Day 20I have had this for years and it works great but one button started to get a hole, so I ordered a new front and change it. Chinese but good fit
Nicely done! I always appreciate those who repair things instead of throwing it away and buying a new one

-
-
Day 20

Dog party with the Spyderco Stretch 2 XL. -
@LoopCutter said:
Day 20A big part of the MTo family and its success is due to the generosity of the members here. This site is a global community and it exhibits tendencies that shares members talents freely.
Those are some great gifts, true generosity right there. We are lucky to have a community like this

-
<u>Day 20</u>
As promised yesterday, Mr Crunch helped me tie in my second crop of peas.
[attach id=0 msg=2581390]
[attach id=1 msg=2581390]
Of course, I agree a few from the first sowing.


-
Look what arrived from work for me today
they knew I’d prefer this to the usual flowers :DDon’t think we’ve had any higonokami’s yet, so here’s a couple
That's thoughtful of your colleagues.
Thank you TexasAKM and SoS.
This belonged to a friend of mine, who asked me to rehandle it, a good few years ago.
He gave it to a mutual friend who, after a few years gave it to me.Day 19
The serrated blade zipped through a ziptie, I was expecting some resistance but it slid through like the tie wasn't there
[attach id=0 msg=2581394]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
