Hello Sailor! Marlin Spike/Rigging Knife Challenge - August 2026
-
Day 1
The Myerchin Gen 2 Ti Captain and I checked out an old steam tractor…

-
<u>WEEK 1 MINI CHALLENGE!</u>
We'll start out easy. Within the next week, post a picture of your spike with your favorite knots, preferably with directions, what it's used for, etc. We'll make sailors out of you all yet.
Day 1
Opinel 9 Ocean.
Someone asked about retention on the spike. There is none. Not a spring, detent, liner lock, magnet, anything. It's still usable if you only apply pressure the right way or choke up enough, but it's one of a number of odd choices on this knife.

-
Day 02
Another use for the spike, venting a cigar. The knife is the Meyerchin 2nd generation titanium crew knife Model TF377. It is a little smaller than Nate's Captain's model the TF300. Both would have had a P at the end of the model number if they were partially serrated. I like the Meyerchin knives, but they are not covered by warranty if you buy it used. They have serial numbers and Meyerchin only covers the original owner who registered it when they bought it.

-
@BPRoberts said:
Opinel 9 Ocean.Someone asked about retention on the spike. There is none. Not a spring, detent, liner lock, magnet, anything. It's still usable if you only apply pressure the right way or choke up enough, but it's one of a number of odd choices on this knife.
Thanks for sharing. I looked at picking up the OPINEL Ocean knife. I read through the info on the OPINEL USA site but it wasn’t clear on the spike. Thank you for answering that for us. I look forward for more of your insight as you use the knife. It will be interesting to see what you think of their “odd choices for the knife.”
JonesE
-
<u>Day 1</u>
I've been wanting a Myerchin since nate j posted about it in last year's Combo Edge Challenge. This challenge finally gave me the impetus to buy one. I really like the look and feel of it. However, I did not like the engagement of the liner lock when I first got it out of the box. Maybe I shouldn't have taken matters into my own hands but... too late. :D

Little filing here...

Little filing there...

There we go. Much better.

It is a good looking knife.

I just now realized as I was posting this, that I failed to take a pic before I took matters into my own hands.

-
Day 2


-
Day 1
Was back and forth on doing this one... but here I amAnd here is a Myerco Sailor sitting on a globe I have disassembled at my workbench waiting to be mounted on a new base.
What that base will be I haven't a clue yet.

(1).jpg)
-
@BPRoberts said:
<u>WEEK 1 MINI CHALLENGE!</u>We'll start out easy. Within the next week, post a picture of your spike with your favorite knots, preferably with directions, what it's used for, etc. We'll make sailors out of you all yet.
Day 1
Opinel 9 Ocean.
Someone asked about retention on the spike. There is none. Not a spring, detent, liner lock, magnet, anything. It's still usable if you only apply pressure the right way or choke up enough, but it's one of a number of odd choices on this knife.
Yeah, weird choice of Opinel's. Isn't there at least a magnet to close the spike though ?
-
[day 2 + 1st mini challenge]
[attach id=0 msg=2583337]
My favorite knot
**OK, I would like to present to all of you my favorite knot, called the **#@°$€%+@# knot**, AKA the lazy children's knot.
Those stupid kids apparently learned (knot from me !) how to tie their shoelaces in such a way one needs a spike to undo the #@°$€%+@# knot.Directions
I would like to give directions, but cannot for two reasons :- The #@°$€%+@# knot never follows the same pattern twice. Millions and millions of different patterns were declined in history and not once did any pattern remotely ressemble another.
- I don't want to encourage the communication of #@°$€%+@# knot instructions on the internet. I don't want that on my conscience.
Use
The #@°$€%+@# knot is used to gain one second while putting on the shoes and have dad lose minutes trying to undo them. Please remark that when dad isn't there, the kids usually just forgo trying to untie the laces, meaning the #@°$€%+@# knot theoretically could last years.**Why it is my favorite.
Well, I'm not a sailor, so this is the knot I'm most familiar with. I must say, if you are going to tie something and are not planning on untying it anytime soon, the #@°$€%+@# knot is the way to go. Of course, I might not come in handy in amateur or professional camping, sailing or similar situations, but I could envision some very practical uses : on a fireship, an enemy's tent (or his kid's shoes).
Another good side of the #@°$€%+@# knot is that it justifies the dad's right —ney, the need—to carry an extra knife, one with a spike in it.
-
Day 2 Mini Challenge: “How to tie a snake knot.”
Step 1. Get a good length of parachord. You will need two strands for this knot. Take the right strand and cross over and around the left strand.
Step 2. Now take the left strand and go behind the tail of the right strand.
Step 3. Take the tail of the left stand and pass it through the loop created by the right stand.
Step 4. Pull tight and enjoy your knot.
JonesE
-
Day 2 of 30
Mini Challenge
My favorite knot must be snake knot, i usually make these when im making lanyard just cause its simple and looks good too[attach id=0 msg=2583354]

-
@AzteCypher said:
<u>Day 1</u>I've been wanting a Myerchin since nate j posted about it in last year's Combo Edge Challenge. This challenge finally gave me the impetus to buy one. I really like the look and feel of it. However, I did not like the engagement of the liner lock when I first got it out of the box. Maybe I shouldn't have taken matters into my own hands but... too late. :D

Good looking knife AC. Thanks for sharing. Having a secure lock up on a working knife is very important. Looks like you are in that sweet spot of 30% to 40% and have room for wear over time. Good job. It must have been nerve wracking.

JonesE
-
Another, all stainless, rigger, for today.
Í always liked Marbles knives, but the rigging knives not so much. Seems that there's always an issue with the spike. I never tried the GI variant, though, because I didn't want to be disappointed again.
-
@Frenchephaistos said:
Yeah, weird choice of Opinel's. Isn't there at least a magnet to close the spike though ?@JonesE said:
Thanks for sharing. I looked at picking up the OPINEL Ocean knife. I read through the info on the OPINEL USA site but it wasn’t clear on the spike. Thank you for answering that for us. I look forward for more of your insight as you use the knife. It will be interesting to see what you think of their “odd choices for the knife.”JonesE
The spike does magnet closed securely. When closed, it's totally flush with the handle, but there's a little tab on the end to open it. Good design there, comfy but accessible.
[attach id=0 msg=2583375]
The bottom awlso includes a lanyard loop (none included), and the whistle. If you've seen the old No 8 outdoor, you'll see that (besides the spike) this is basically a scaled up version of that design.
[attach id=1 msg=2583375]
The shackle key is, hypothetically, usable as a OHO hole. It seems a little easier to use than the one on the 8, since it's larger. You might note that I was not too careful when I was practicing though... Something I tried, but never got to work, with the 8 was putting a screw, bar, etc. through the shackle key to use as a thumbstud, like some people aftermarket on their Bucks. The larger size here gives me a little hope. I experimented some this morning and couldn't get it quite working, but got closer than on the smaller model.
The semi-serrated blade came quite dull, which is not my usual Opinel experience. It did get screamin' sharp easily with the Sharpmaker. The tip is a bit less tippy than the normal Opinel profile. Not fully rounded like the Neos, and still usable for pokey jobs, but a bit less. I looked on the website and I'm not sure if it's intentional or not. Blunt tips are common on rigging knives, and I kind of wish they'd put the flat tip from the new Alpine on so I could try it without buying another knife...
This will not be my only carry for the challenge, but I'll keep y'awl apprised as I continue to play with it.


-
@BPRoberts said:
Opinel 9 Ocean.Someone asked about retention on the spike. There is none. Not a spring, detent, liner lock, magnet, anything. It's still usable if you only apply pressure the right way or choke up enough, but it's one of a number of odd choices on this knife.
Thanks for letting us know. Spike that doesn’t lock would be a non-starter for me.
-
@Alan K. said:
The knife is the Meyerchin 2nd generation titanium crew knife Model TF377. It is a little smaller than Nate's Captain's model the TF300. Both would have had a P at the end of the model number if they were partially serrated.Preach on, Brother Alan!
To perhaps add a bit more for those who may not be familiar with Myerchin’s nomenclature (which isn’t necessarily intuitive):
Captain = Large Version
Crew = Small Version
Pro = Partially Serrated
-
@AzteCypher said:
I've been wanting a Myerchin since nate j posted about it in last year's Combo Edge Challenge. This challenge finally gave me the impetus to buy one. I really like the look and feel of it. However, I did not like the engagement of the liner lock when I first got it out of the box. Maybe I shouldn't have taken matters into my own hands but... too late. :D
Little filing here...

Little filing there...

There we go. Much better.

It is a good looking knife.

I just now realized as I was posting this, that I failed to take a pic before I took matters into my own hands.

AC, looks great!

-
@Frenchephaistos said:
[day 2 + 1st mini challenge][attach id=0 msg=2583337]
My favorite knot
**OK, I would like to present to all of you my favorite knot, called the **#@°$€%+@# knot**, AKA the lazy children's knot.
Those stupid kids apparently learned (knot from me !) how to tie their shoelaces in such a way one needs a spike to undo the #@°$€%+@# knot.Directions
I would like to give directions, but cannot for two reasons :- The #@°$€%+@# knot never follows the same pattern twice. Millions and millions of different patterns were declined in history and not once did any pattern remotely ressemble another.
- I don't want to encourage the communication of #@°$€%+@# knot instructions on the internet. I don't want that on my conscience.
Use
The #@°$€%+@# knot is used to gain one second while putting on the shoes and have dad lose minutes trying to undo them. Please remark that when dad isn't there, the kids usually just forgo trying to untie the laces, meaning the #@°$€%+@# knot theoretically could last years.**Why it is my favorite.
Well, I'm not a sailor, so this is the knot I'm most familiar with. I must say, if you are going to tie something and are not planning on untying it anytime soon, the #@°$€%+@# knot is the way to go. Of course, I might not come in handy in amateur or professional camping, sailing or similar situations, but I could envision some very practical uses : on a fireship, an enemy's tent (or his kid's shoes).
Another good side of the #@°$€%+@# knot is that it justifies the dad's right —ney, the need—to carry an extra knife, one with a spike in it.
-
Nice one Aztec.
Day 02, part 02
Went to hear music in the park today and took refuge in my car during the afternoon storm. Thankfully, it only lasted about 20 minutes, and it was about 10 degrees cooler after.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



