Hello Sailor! Marlin Spike/Rigging Knife Challenge - August 2026
-
Day 7
@PitCarver said:
A quick question though. I was looking and saw that the blade is some sort of a "flicker"? How is that to use and do you think that it would hold up over time.@PitCarver said:
Seems that you answered the question that I posed to AC, on the blade opening. The blade isn't on bearings, or anything other than a pivot pin, is it?I have not had mine apart, but certainly does not feel like it is on bearings. My guess is direct on pivot pin, or possibly simple washer.
The āflipper tabā is just part of the blade that sticks out the back of the handle when the knife is closed. (When the knife is open, it serves as something of an integral guard.) By pressing this with the index finger combined with a wrist flick, it is possible to quickly flip or flick the knife open. It is fully manual, i.e. not any sort of AO mechanism. I donāt have any reason to believe it would hold up less well over time than the rest of the knife.
Also, if you donāt like the flipper feature or canāt get it to work reliably, you can still OHO the knife (albeit not quite as fast) by using the shackle key as a thumb hole.
P.S. As I was playing around with the knives and taking these pics, I did successfully flip the Crew open. So it can be done, but not nearly as easy as the Captain, and requires a pretty aggressive wrist flick.


-
Thanks, Nate.
I'm not really an assisted kind of knife guy. I definitely prefer a simple kind of folder. -
My first- and second-generation titanium crew knives do not have the flipper tab. It must have been a later addition.

-
@Alan K. said:
My first- and second-generation titanium crew knives do not have the flipper tab. It must have been a later addition.
Interesting. Itās a nice upgrade IMO.
@PitCarver said:
Thanks, Nate.
I'm not really an assisted kind of knife guy. I definitely prefer a simple kind of folder.To perhaps clarify, these are not assisted. It is just a manual flipper tab, which you can use or not, as you prefer.
-
-
Thanks for the well wishes. Fortunately, this is a pleasure trip, not business, just very busy getting around the first couple days.
Thanks for the instructions, PC. I'll give it a try before the end of the challenge sometime. Awlso cool to see your Swiss marlin spike, I like when people can find different uses for tools like that.
Day 5
My wife asked me to marlin spike a knot out of this band she uses for stretches. Roxon performed well.

-
The blade rotates on two plastic washers. Here's a closeup of one of the plastic washers.

I do have to flick mine a bit harder while pushing that little tab on the back to get the blade to deploy. I find it easier to use both my hands to open it rather than using the shackle as a thumb hole. I always feel a bit clumsy when using a thumb hole.

<u>Day 7</u>
Using the Marlin spike for what it's meant for after playing around with some paracord.

-
Day 7
Almost missed it, so a cheap last minute pic of the Myerco and Skipper together..jpg)
-
Day 7 Nothing particular to report.
[attach id=0 msg=2583931]

-
Day 8
When life gives you lemons š stab āem with a marlin spike


-
@Noa Isumi said:
Day 7
Almost missed it, so a cheap last minute pic of the Myerco and Skipper together.It's nice seeing a more proper nautical style lanyard on your rigging knife, Noa.
It's easy to see why folks make their own lanyards, too.
Prices for regular belt/wrist lanyards start at $10.00 for a simple cotton lanyard and rise after adding hardware while a tarred lanyard with brass hardware hits $40.00.

-
Worked on the Star knot, for my lanyard, yesterday afternoon. I had pre-shrunk the cord for the lanyard itself but not for the star.
First photo is the knot before tightening it up. I have cord coming from the top, where I added the same decorative feature that I did all those years ago.[attach id=0 msg=2583980]
After finishing it up I soaked it in hot water to allow it to shrink up. This lanyard, based on the size of the Star knot, will be a lot smaller than the old one.
[attach id=1 msg=2583980]
If it's too small, when I finish, I'll need to try one in 325 paracord. I'm hoping that this one comes out like I'm hoping it will because I like this gold color cord.


-
Nice piece, PC.
Day 6
Made it through cruise security without issue. I used the often recommended, "deploy all tools and tell them there's no knife" method, and they only gave it a brief look.

-
Day 08
De-child-proofed the top of a pill bottle with the TF377.

-
Nice work there PC. Can't wait to see the finished product.
<u>Day 8</u>
One more knot...
Let's go for the square knot, which is also known as the reef knot. This knot is used to tie two lengths or cord together.
Lay out a length of cord on the left and form a loop.

Grab another length of cord and go under and through the first loop you made.

Grab the end of the 2nd cord and run it under both ends of the first loop.

Continue with the 2nd cord and go over the first cord, then under the loop.

Then pull taught and you now have your square knot.

-
-
Day 8 of 30
I was real busy day yesterday and forgot to post here but now here it is.
Used blade to cut open boxes and used spike to poke holes on them just for fun.[attach id=0 msg=2584048]

-
Day 8
When is a knot not a knot...
When it is cinched around a cleat.No knife or spike action but am showing off an interesting little NiteIze Figure 9 cleat I have hanging around.
.jpg)
-
Day 9
Hope you donāt mind but I did take this pic a few days agoā¦..because Iām in Darwin š no thatās not me āfishing for crocs
ā


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login


