Hello Sailor! Marlin Spike/Rigging Knife Challenge - August 2026
-
Day 10
The crew left some shackles and rope out after we pulled out of dock, so I took the opportunity to check. My spike matches the shackles they used.

-
Day 12
Spent some time this morning working on the new to me SOG West Marine rigging knife. The knife is in overall good shape and was slightly used. However, it did spend some time in a salt water environment. There was some minor staining on the back springs and liners. So I took some 320 grit sand paper and worked my way around the knife till it was all gone. I wanted to get rid of the staining before it stared to pit. I also sharpened the blade. It is now soaking in a bowl of fresh water to hopefully neutralize any salt I can’t get to. So far I am really liking this SOG.
JonesE
-
Good find, JonesE.
One of mine had a cover come off of one of the pivot pins, and I saw a review that mentioned that also.If you notice, in some of the pics I've posted, it simply looks black. I filled it in with epoxy and colored it with a permanent marker.
The original one is perfect though.
-
Moving right along with my challenge lanyard, today.
I finished off the French sinnet, last night. The instructions said to make it 2 inches and mine is something over 5. Why, I wanted to make sure that it was long enough to go over any belt that I have.Today should be easier. 2 short 3 strand braids, followed by yet a third Matthew Walker knot.

-
Day 12 of 30
Used spike today to untie my shoelaces
[attach id=0 msg=2584491]

-
@PitCarver said:
I'm really liking the look of those Myerchin crew knives Nate. While I like the liner lock on the titanium, I'm too cheap and have my eyes on a wooden handle one, though the bone might develop nice colors after a while.Here’s my $0.02 on the Myerchin handle materials, with the understanding that all mine are either Ti or black G10, so I don’t actually own any with the bone or wood…
If you intend to really carry the knife, it is worth saving your pennies up until you can get the Ti, simply because it is so much lighter than the other options.
G10 very durable and more comfortable than Ti, but way heavier.
The only reason I would consider (and I suspect the only reason Myerchin produces) bone handles is for scrimshaw purposes.
According to Myerchin, the “hardwood handle has been tested for durability in a marine environment”, so hopefully works out well if that’s the route you want to go.

-
<u>Day 12</u>
Had to use my handy, dandy, pencil sharpener today.

-
Day 13
Thought the blade might be a bit wide for letter opening but worked well

-
Day 12

-
Day12
Was repacking some boxes and found my old saftey/rescue harness, PFLs and anchors from when I worked in fall protection. So after sorting the real gear from my homemade stuff I found my old woods rope.
By buddies and I would use this (and a couple others) to navigate steep embankments and get in & out of creeks.It is made from dyneema rigging rope for sail racing with ultra lite anchor snaps tied on using a hangman's knot. The components are live load rated, though my knots would never pass.
Of course I had to see if I could still tie a hangman... and yes, though very poorly. The paracord is twisted & kinked; once cinched down I did need the spike to pick that tail out and undo it.This challange would be a lot easier if I still worked that job, but that seems like a lifetime ago.

.jpg)
-
Day 13 of 30
Today used blade to open food package and spike was used to clean dirt out of my nails
[attach id=0 msg=2584579]

-
@nate j said:
Here’s my $0.02 on the Myerchin handle materials, with the understanding that all mine are either Ti or black G10, so I don’t actually own any with the bone or wood…If you intend to really carry the knife, it is worth saving your pennies up until you can get the Ti, simply because it is so much lighter than the other options.
G10 very durable and more comfortable than Ti, but way heavier.
The only reason I would consider (and I suspect the only reason Myerchin produces) bone handles is for scrimshaw purposes.
According to Myerchin, the “hardwood handle has been tested for durability in a marine environment”, so hopefully works out well if that’s the route you want to go.

You do know that we don't produce pennies any longer, Nate?

I'm at the age, now, that while extra weight could be a limiting factor, I might lean towards the visual affect.
I like the looks of the wood (and to a lesser degree, the bone) scales.[attach id=0 msg=2584615]Keep in mind, too, that mine are generally used with making paracord things and not for the major uses aboard ship.

-
I can now start to button this project up.
(Only after I finish the long part)

-
Day 11
Starting the trip back home, to better internet and being able to actually see awl your posts. I cut some foil for a pinhole viewer for the eclipse. Too cloudy for the pinhole, but enough that it was probably easier to see the actual eclipse. Pics once I'm back to good internet.

-
Day 13
Back in the office today. Had the rigging tool and SOG PowerLock with me. I really like the partially serrated sheep’s foot blade on the rigging knife. Used it to open some packages that came in while we wear away. The shackle key cutout in the blade is handy for a quick pinch to open the blade. With the strong backspring, it is nice having that extra confidence your blade is not going to slip from your fingers when opening the blade.
PC, thanks for the info on the pivot covers. I checked mine and they all seem to be tight.
JonesE
-
@PitCarver said:
I can now start to button this project up.(Only after I finish the long part)
Your lanyard looks amazing. I truly enjoy seeing your progress as you make your way through the various parts of the project. Thanks for sharing.

JonesE
-
Day 13
Package opening duty for the first-generation Offshore System B100.


-
@PitCarver said:
You do know that we don't produce pennies any longer, Nate?
Yea, but saving your nickels doesn’t quite have the same ring to it…
-
<u>Day 13</u>
No use for the Myerchin today unfortunately. I know.... :(
So I worked on something else.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

