What's your latest flashlight?
-
@Millhouse said:
2 x Nitecore EDC07.First non Fenix light in a long time. First retangular light. First light with non removable battery.
Oooh, I like the look of that!
Lots of good sounding features for a very reasonable price. How are you getting on with it? -
@Gareth said:
Oooh, I like the look of that!
Lots of good sounding features for a very reasonable price. How are you getting on with it?So far, so good. I have 2 of these lights, one in my work bag, the other is in my EDC rotation. Certainly over the last couple of months, it has been my most carried light.
Pros.
Slim design and deep carry pocket clip, very easy to carry.
LEDs capable of cool, neutral and warm output. You can pick your preference. Easy to switch between as well.
Can tail stand.
Polymer body, gives good grip and makes light very lightweight.
Cons
Inbuilt, non replaceable battery
Hidden modes - Moonlight, strobe, SOS. If you need to access, bit long winded. Light will remember the mode until changed.
However, given the price, I can't really complain.
-
@mathmitch7 said:
(Until I get a Pineapple Mini or another AAA I like better).Cheers to new lights!
The Pineapple Mini is my favorite AAA light. Between the programmable UI, beautiful LEDs and good power. RovyVon Angel Eyes is another nice AAA but totally different format.
-
Bought a new ArkPro, but had Vinh at SkyLumen do a LED modification so both LEDs are HiCRI with the spotlight being natural white and the flood is a warm white.

-
-
-
-
@m47mu74nt said:
The only way to get a Olight with a good beam (I like most of the Olight I own, BUT, they really lack a good HiCRI, 3500-4500k, non-greenish emitter):agree: Fenix is the same way. I use to love Fenix lights then got into flashlights and learned/experienced what quality LEDs look like. Now I despise CW, which is predominantly what Fenix and Olight offer. My personal preference is neutral to warm 5700-3500k in HiCRI.
Sent from my iPad using Tapatalk
-
-
@m47mu74nt said:
The only way to get a Olight with a good beam (I like most of the Olight I own, BUT, they really lack a good HiCRI, 3500-4500k, non-greenish emitter)@Sos24 said:
:agree: Fenix is the same way. I use to love Fenix lights then got into flashlights and learned/experienced what quality LEDs look like. Now I despise CW, which is predominantly what Fenix and Olight offer. My personal preference is neutral to warm 5700-3500k in HiCRI.Sent from my iPad using Tapatalk
Thanks to you enablers, I’ve ordered 4000k light, a Wurkkos FC11C.
I’m a little concerned it will ruin the rest of my lights for me…
-
@nate j said:
Thanks to you enablers, I’ve ordered 4000k light, a Wurkkos FC11C.I’m a little concerned it will ruin the rest of my lights for me…
519A is a nice choice. You will definitely notice a difference. I’ll be interested in your thoughts.
-
-
@Sos24 said:
519A is a nice choice. You will definitely notice a difference. I’ll be interested in your thoughts.It has arrived.
Initial impressions out of the box weren’t bad.
Compared to my Fenix PD26R ACE, the Wurkkos FC11C is a bit longer, but actually slightly smaller maximum diameter, and weighs just a bit more at 4.0 oz vs. 3.6 oz.
Quality not quite on par with the Fenix, but pretty solid considering the Fenix costs roughly 3x more.
The Wurkkos puts out a nice, warm, pleasing light. It clearly renders colors better.
Oddly, it still showed that it wasn’t charged in spite of being on the charger all night. Unplugged it, plugged into a different charger, and immediately showed full charge.

The worst thing about the Wurkkos FC11C (at least so far) was entirely preventable, even at its price point. Wurkkos succumbed to the temptation to pack far too many modes and features into a light with a single-button UI. This results in overly complicated sequences and a high user error rate.
All of the following “commands” are right out of the user manual:
- Single click
- Press and hold
- Double click
- Press 1 second
- Press again within 1.5 seconds
- Triple click
- Press and hold for 3 seconds
- Quadruple click

If I were designing a single button light, it would work as follows:
- Long press (press & hold) - turns light on or off
- Quick press - cycles output level when the light is on
That is all.
Frankly, even with the aid of the manual and the fact that I’m far from a flashlight novice, I’m having a difficult time getting the output I want to come out of the light consistently. And I can’t tell for certain if the light is actually malfunctioning, if it’s user error on my part, or both. I’m going to play with it some more, but if I can’t get this issue resolved, there is no chance I’ll trust it as a carry light.


-
I also recently got an orange Wurkkos FC11C. I generally like it a lot, and hard to beat the price.
I personally don't mind having a million modes, but I'm also willing to futz around with it until I get the beam I want. The basic "One short press gets me to the most recently used brightness, a second long press cycles through the brightnesses, double tap goes to max, one long press gets me to min" works across a lot of my lights, and the variations between them are usually minimal enough that I don't mind. My main EDC is actually all single presses, off > low > off > high > off, but that's so simple I can hand it to friends without explanation.
Flashlights are always about finding that balance of usability, size, form factor, brightness, battery life, color, etc. I think it's why nobody can ever have just one... they're always looking for that perfect light.
-
@mathmitch7 said:
I also recently got an orange Wurkkos FC11C. I generally like it a lot, and hard to beat the price.I personally don't mind having a million modes, but I'm also willing to futz around with it until I get the beam I want. The basic "One short press gets me to the most recently used brightness, a second long press cycles through the brightnesses, double tap goes to max, one long press gets me to min" works across a lot of my lights, and the variations between them are usually minimal enough that I don't mind. My main EDC is actually all single presses, off > low > off > high > off, but that's so simple I can hand it to friends without explanation.
Flashlights are always about finding that balance of usability, size, form factor, brightness, battery life, color, etc. I think it's why nobody can ever have just one... they're always looking for that perfect light.
I’m really beginning to think mine is defective. Now, it seems nothing I do produces anything but an extremely low (moonlight) output.
-
@nate j said:
It has arrived.Initial impressions out of the box weren’t bad.
Compared to my Fenix PD26R ACE, the Wurkkos FC11C is a bit longer, but actually slightly smaller maximum diameter, and weighs just a bit more at 4.0 oz vs. 3.6 oz.
Quality not quite on par with the Fenix, but pretty solid considering the Fenix costs roughly 3x more.
The Wurkkos puts out a nice, warm, pleasing light. It clearly renders colors better.
Oddly, it still showed that it wasn’t charged in spite of being on the charger all night. Unplugged it, plugged into a different charger, and immediately showed full charge.

The worst thing about the Wurkkos FC11C (at least so far) was entirely preventable, even at its price point. Wurkkos succumbed to the temptation to pack far too many modes and features into a light with a single-button UI. This results in overly complicated sequences and a high user error rate.
All of the following “commands” are right out of the user manual:
- Single click
- Press and hold
- Double click
- Press 1 second
- Press again within 1.5 seconds
- Triple click
- Press and hold for 3 seconds
- Quadruple click

If I were designing a single button light, it would work as follows:
- Long press (press & hold) - turns light on or off
- Quick press - cycles output level when the light is on
That is all.
Frankly, even with the aid of the manual and the fact that I’m far from a flashlight novice, I’m having a difficult time getting the output I want to come out of the light consistently. And I can’t tell for certain if the light is actually malfunctioning, if it’s user error on my part, or both. I’m going to play with it some more, but if I can’t get this issue resolved, there is no chance I’ll trust it as a carry light.
I do hate over complicated UIs.
-
Just got this V3 EDC torch for just under a tenner. Send decent - 3 light levels from the two main lens, plus white, blue, red and nightlight mode from the led's in the body - also rechargeable on a USB C
Pictured here with my Luminox and Olight

-
I recently got a RovyVon A3 flashlight, which now lives on my keychain. This was to replace a Nitecore Tube that I gave to my dad.
The RovyVon has two magnets, one in the clip and one on the end. I'm not sure how much I like these for a flashlight I'm specifically using for my keychain, but it's easy enough to remove both the clip and the end-magnet. I like that this flashlight has more brightness modes than my Tube, and hypothetically goes up to 650 lumens (compare to the Tube's 45). After 60 seconds on Medium (200 lm) or High (650 lm), it automatically bumps down to 85 lm, which is... a feature. I don't know if I like that part or not.
It's a bit heavier than I'm used to, but it's been working fine for the keychain. It also has an unusual interface, which will definitely take getting used to. That is:
-
Press and hold for momentary on (high)
-
Double click for 'memorized' brightness
-
Click from 'memorized' brightness to cycle brightness (moon/low/med/high)
-
Leave at preferred brightness for 3+ minutes and turn off to memorize new mode (note, I don't know if this works with high/medium as those brightnesses automatically change!).
-
Triple click for strobe
-
Five clicks to lock/unlock
Overall, it will take some getting used to. The brightness is great though, and the thing seems durable as heck. We'll see how I end up feeling about it.
-
-
@mathmitch7 said:
I recently got a RovyVon A3 flashlight, which now lives on my keychain. This was to replace a Nitecore Tube that I gave to my dad.The RovyVon has two magnets, one in the clip and one on the end. I'm not sure how much I like these for a flashlight I'm specifically using for my keychain, but it's easy enough to remove both the clip and the end-magnet. I like that this flashlight has more brightness modes than my Tube, and hypothetically goes up to 650 lumens (compare to the Tube's 45). After 60 seconds on Medium (200 lm) or High (650 lm), it automatically bumps down to 85 lm, which is... a feature. I don't know if I like that part or not.
It's a bit heavier than I'm used to, but it's been working fine for the keychain. It also has an unusual interface, which will definitely take getting used to. That is:
- Press and hold for momentary on (high)
- Double click for 'memorized' brightness
- Click from 'memorized' brightness to cycle brightness (moon/low/med/high)
- Leave at preferred brightness for 3+ minutes and turn off to memorize new mode (note, I don't know if this works with high/medium as those brightnesses automatically change!).
- Triple click for strobe
- Five clicks to lock/unlock
Overall, it will take some getting used to. The brightness is great though, and the thing seems durable as heck. We'll see how I end up feeling about it.
Sounds way more complicated than I would want, but here’s hoping it works out for you!

-
@nate j said:
Sounds way more complicated than I would want, but here’s hoping it works out for you!

I think most of the time I'll either be pressing and holding, or double pressing. Of course, remembering to do either of those rather than just tapping the button is the hard part!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better đź’—
Register Login


