Hello Sailor! Marlin Spike/Rigging Knife Challenge - August 2026
-
Day 15

-
Got a bit carried away…..can openers issued to ADF (Australian Defense Forces) roughly (and not exhaustively) 1940 to 1990’s. They started issuing Vic Swiss Tools and other PB MT’s after that
Top is the FRED and Whitingslowe #43 (Adelaide, Australia) down to some old BAK’s. All issued
What a great collection. Really like seeing the progression over time. Thank you so much for sharing your collection.

JonesE
-
Day 13
Back state-side, not quite home yet, but close.

-
@JonesE said:
What a great collection. Really like seeing the progression over time. Thank you so much for sharing your collection.
JonesE
I concur. That's pretty neat.
<u>Day 15</u>
I have to agree with Alan. It is definitely cigar time, though I had wait until the sun had set so I wouldn't get cooked outside in this Texas weather.

-
Day15
Can the Skipper be a navigation tool
Well I did magnitize my eyeglasse screwdriver so let's see if we can make a floating compass.
I've bunped this around a few times to double check, and it does work

It is pointing South but it is still a workable N/S refrence.jpg)

-
Day 14
It is not a great screwdriver, but it got the job done.

-
Day 14
In the mountains with the Vic Skipper…

-
Day 16 of 30
Today lazy sunday and no use for knife
[attach id=0 msg=2584915]

-
-
Well gent's, I've already cut my cigar, today but didn't take a picture. I did get a picture of the beginning of the end of my lanyard.
[attach id=0 msg=2584927]
I'm wondering if I'll get some sense of satisfaction for taking the longest time to complete a mini challenge.


-
@PitCarver said:
Well gent's, I've already cut my cigar, today but didn't take a picture. I did get a picture of the beginning of the end of my lanyard.I'm wondering if I'll get some sense of satisfaction for taking the longest time to complete a mini challenge.


<u>Day 16</u>
Sharpening my Camillus marlin spike. I think it's going to need a bit more sharpening but I don't want to take off too much more metal. Maybe I'm over stressing it but I'm going to try it out this week and see if it'll get the job done. Blade edge was pretty wonky. I don't know if the previous owner was trying to put serrations on it or just hacked at it with a rock but the edge at least looks straight now.

-
@JonesE said:
What a great collection. Really like seeing the progression over time. Thank you so much for sharing your collection.
JonesE
@AzteCypher said:
I concur. That's pretty neat.Thanks guys

-
Day17
Needed a hand with the light... and the Skipper's lanyard did the trick.
-
Day 17
Shelham on opening duty

-
Day 17 of 30
Today knife helped me to open food package at work
[attach id=0 msg=2584980]

-
Day 16 late entry
The first gen TF377P titanium crew knife carries tip up and the shackle just makes an awful racket, bouncing as you walk. Tink, tink, tink. Adding the counterweight of the shark bottle opener helped a little but it's still irritating.


-
Day 17
The second generation TF377 titanium crew knife carries tip down and has a bail for attaching a lanyard that serves no other function, as opposed to the shackle of the first gen that serves as the lock release for both the blade and the spike. I prefer the tip up carry so you're pulling the knife from your pocket in the right position to put it into immediate use. Tip down has to be rotated in the hand before you can open and use it. The bail doesn't rattle as much as the shackle on the first gen, but it still makes an annoying click with every step you take to the point of your stopping and asking, "what the Smurf is that clicking noise?" which is why I added the 2-inch piece of paracord, just to stop the clicking.


-
I really like the shackle on the first generation, large enough to attach almost any snap to it . That's an issue with many riggers these days.
-
Finally got the length on the finishing half round braid.
It's about 15 inches, which is really too long to realistically use, but I have my trusty jig that I'll use to measure it down.
Bryon Toss b says in the instructions that the total length of the lanyard should go around the wrist 1 and a half times, meaning that this final braid should be about 9 inches. I'm personally thinking that I'd attach it to a belt and be able to use the spike for paracord, if it was closer to the 15 inch length.
I'm not sure what tomorrow will bring, but the finish line is in sight.

[attach id=0 msg=2585009]

-
@PitCarver said:
Finally got the length on the finishing half round braid.
It's about 15 inches, which is really too long to realistically use, but I have my trusty jig that I'll use to measure it down.
Bryon Toss b says in the instructions that the total length of the lanyard should go around the wrist 1 and a half times, meaning that this final braid should be about 9 inches. I'm personally thinking that I'd attach it to a belt and be able to use the spike for paracord, if it was closer to the 15 inch length.
I'm not sure what tomorrow will bring, but the finish line is in sight.

[attach id=0 msg=2585009]
Well, 1.5 times around my wrist would be pretty close to 15 inches.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
