Hello Sailor! Marlin Spike/Rigging Knife Challenge - August 2026
-
-
Day 21 of 30
Today spike helped me to open can of energy drink
[attach id=0 msg=2585351]

-
Do I do, like Alexander the Great did after taking over his whole known world, stop and cry because he had nothing left to concord? I'm now in the position of simply posting a different picture of my SOG WM along with the new lanyard for the next 10 or so days,
Or, I could start another project .
I found a hank of 325 paracord this morning and thought about another lanyard. The only issue I have with it is it's black. And designs are hard to see on black cord. Only other 325 that I can find is purple. I hate purple.
So, black it is.
Now I won't be doing a step by step photo guide but don't be surprised to see a new lanyard posting for the remainder of the challenge.
Who knows, it might pair well with the Chinese clasp knife clone that's on the way.

-
Really looking forward to see what you get up to with the new project. If it is anything like the last one it will be epic.

JonesE
-
@nate j said:
It’s a wicked spike, but isn’t it like 4 layers wide?It's "only" three...
Day 19
My school is under renovation, but the kids are back Monday, so I had to try to get the room at least somewhat ship shape (in between maintenance trying to fix a leak above me...) I took the Workchamp XL, since I wasn't sure what all I'd wind up doing. Used about half a dozen tools over the course of the day. The spike/key is a good staple puller. I had one that was really wedged in that I was only able to get out by wrapping through the shackle eye.


-
Day 20
Screwdrivers
The flat as a pry tool for the clips on this dog kennel, and the Philips to pull & replace some vent grates (not pic)
-
-
Day 21
A typical pairing that works well.

-
Day 22

-
Day 18 & Mini-Challenge 3
Shackle key + nail = handy way to store your knife

-
@Alan K. said:
I prefer the tip up carry so you're pulling the knife from your pocket in the right position to put it into immediate use. Tip down has to be rotated in the hand before you can open and use it.I don’t hate tip up, but tip down has always felt more natural and been faster for me.
Tip down, I grab the knife with thumb & forefinger and pull the knife. As it clears the pocket, I rotate my forearm to parallel with the ground, and (thanks to gravity) the knife rotates into normal (forward grip, edge out) position in my hand without having to change my grip.
Tip up, my thumb & forefinger grab the knife and pull it from my pocket. But those fingers are on the wrong (butt) end of the knife, so I have to change my grip to get the knife into normal position to open it.
-
I'm right-handed but carry in my left pocket. Here's me removing the TF377 from my left pocket, and as you said, the fingers are at the wrong end for opening. I transfer the knife to my right hand and slide my left thumb and forefinger to the blade in a pinch grip to open the blade as the right hand pulls the knife away by the handle. If I carried it in my right-hand pocket, I am able to consistently use the shackle key cut out of the blade as a thumb hole and open the knife with one hand. However, it's not a tactical knife and I don't think it was ever meant for one handed opening anyway.


-
Day 22 of 30
Today no use for my marine knife, just waiting action.
[attach id=0 msg=2585502]

-
Day 19
Myerchin Ti Captain helped open a fresh bag of jawbreakers

-
Finished up the star knot, on the next lanyard. I went with the regular 5 points instead of the 6 on the first one. The shrinkage on the other cords was a bit more than I expected, but I still have 6 feet to play with.
Whatever it eventually makes is what will go on the new rigger, which was prepared very quickly but is still in China. I think that it'd be really cool to finish up the lanyard on the day the knife is delivered, but it looks like I'll have it ready way in advance.

-
Day 21
Even with the floating eyeglass driver compass Skipper still doesn't know where he is.
We need a way to measure angles... a protractor.
On land we can both draw and follow accurate maps with properly triangulated landmarks.
At sea we can measure the NorthStar or Southern Cross vs horizon to guage N/S latitude drift/navigation so we can travel a strait(ish) E/W course.So let's get this thought excersize started:
Using the blade and spike as a compass scribe I lay out a circle
I used the factory edge of the cardboard as a strait edge to extend the scale's compass graphic. I could have also achieved this from scratch with more overlapping arcs but thats more work. Then I used the width of the knife and flat screwdriver to further devide it down.Is it accurate?
Well its as accurate as a 5min craft project made from cardboard scrap can be.
Against the guage on my phone most measurements are close with a 2deg variable and the worst are those markings at the 45s which are 3-4deg off.
This is mostly due to my rushed sloppiness. If making this for real a lot more care should be taken; but as proof of concept its passable.
It honestly took more time to type this than to make it.*note deg numbers on the cardboard are just my own reference so they dont read the same number as the app
.jpg)
.jpg)
.jpg)
-
@Alan K. said:
I'm right-handed but carry in my left pocket. Here's me removing the TF377 from my left pocket, and as you said, the fingers are at the wrong end for opening. I transfer the knife to my right hand and slide my left thumb and forefinger to the blade in a pinch grip to open the blade as the right hand pulls the knife away by the handle. If I carried it in my right-hand pocket, I am able to consistently use the shackle key cut out of the blade as a thumb hole and open the knife with one hand. However, it's not a tactical knife and I don't think it was ever meant for one handed opening anyway.

I would agree that the Gen1 Myerchins weren’t designed with OHO in mind.
On the late Gen2, however, the flipper tab is clearly intended for OHO, as it serves no other purpose.
On the early Gen2, it’s less obvious, but either shackles got bigger, Myerchin realized their old shackle key was too small for some shackles (idk, I’m not really much of a sailor), or Myerchin deliberately shifted and elongated the shackle key so it could more easily be used thumb hole to OHO the blade.
What’s your process for tip up?
-
Day 20
Note the differences in shackle keys between Gen1 and late Gen2. Perhaps someone with more nautical experience can tell us whether the hypothesis in my previous post is correct?

-
-
Day 23
Agree the late second gen with a flipper tab is intended for one handed opening. They really should have called that the generation 2.5 or 3rd generation because my 2nd generation TF377 does not have the flipper tab.
Tip up carry of the 1st generation TF377P requires me to switch hands before opening or pinch open the blade with right thumb and forefinger before switching the now open knife to my right hand.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


