Hello Sailor! Marlin Spike/Rigging Knife Challenge - August 2026
-
Day 25
Seeing this chain on the counter reminded me of something the Myerco excels at with its super pokey spike... untangling jewelry.I have used it for this several times in the past.
Roll the tangle/knot until a gap opens and slip the spike in just to hold it in place. You could even clamp the knife with the spike out as a bench tool and use a magnifier if you wanted to be fancy.
Now that the spike is holding the chain in place with a fixed opening to work around use tweezers or a pin to gradually shift links from the loose chain into the knot adding slack until the chain is no longer tightly bound on itself. Frome there it can be untied.
Its kinda the opposite of how I chinched that button knot I tied on day2/3, instead of working slack out to form the knot pattern you are adding it in until the knot falls apart.I know that description is really bad, but it is one of those feel things.
.jpg)
-
Day 26
My grandad used to keep his nails etc in these little oxo tins in his shed where he built all sorts of stuff. They’d be 1930’s or 40’s same as the BAK
Most notably he built a model railway including all the rolling stock that ran the entire top floor of my grandparents house, much to the dismay of my grandmother.
It permanently took up the spare room and then could be extended out into the other two bedrooms and hallway. Me and my sister loved visiting :)
-
Noa, I never thought about using the marlin spike on necklaces. I found your description of the process perfectly clear.

Echo, I'd have loved to have seen a picture of the train set.

-
Day 26
Juice Box!

-
Day 26 of 30
Today some letter opening with blade
[attach id=0 msg=2585860]

-
Needed to tighten up the shackle on a key tag.

-
@Noa Isumi said:
Day 25
Seeing this chain on the counter reminded me of something the Myerco excels at with its super pokey spike... untangling jewelry.I have used it for this several times in the past.
Roll the tangle/knot until a gap opens and slip the spike in just to hold it in place. You could even clamp the knife with the spike out as a bench tool and use a magnifier if you wanted to be fancy.
Now that the spike is holding the chain in place with a fixed opening to work around use tweezers or a pin to gradually shift links from the loose chain into the knot adding slack until the chain is no longer tightly bound on itself. Frome there it can be untied.
Its kinda the opposite of how I chinched that button knot I tied on day2/3, instead of working slack out to form the knot pattern you are adding it in until the knot falls apart.I know that description is really bad, but it is one of those feel things.
Yep.
With four daughters, I untangle my share of necklaces. A sharp marlin spike, a pin, a small screwdriver, SAK corkscrew…all have been used. Usually find it easiest to lay the knotted item(s) flat on a table, which takes the tension off the knots, and then go at it with one tool in each hand.
-
-
@BPRoberts said:
Day 24The KABAR opened some friends for the Barlow Challenge.

-
<u>Day 26</u>
Package duty! And yes, there was something interesting in there. :D


-
Day26
No knife action, just lunch.
Hot sausage, peppers, onions, griled with a drizzle of honey on fresh flour tortillias with pepper jack & American,.jpg)
-
Day 27
Think I might keep it like this


-
I'm glad that someone got something good in the mail, AC. I wasn't so lucky. All I got was some more key rings.

-
Day 25
Grabbed the Colonial to open a new game for my kids…

-
Day 27
Mini challenge to open a shackle key with the shackle key cutout on the blade. Um... Nope.

This is the smallest shackle I have and the shackle key cutout on the blade wasn't even close to fitting it. However, I was able to turn the shackle key with the marlin spike.

-
Day 27 of 30
Today blade helped break seal on my hot sauce.
[attach id=0 msg=2585965]
Shackle key in action, tested it and it worked as intented
[attach id=1 msg=2585965]


-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



With Nate! Noa, your lunch looks drool worthy! 