Ti-Link Titanium Multitool Bracelet
-
Link #3 is actually pretty sweet. It has a 4mm hex socket in the end of it to take the 4mm bits (included in other links) but also has a removable bit driver, held in with tiny, powerful magnets. This gives you more extension on the bits themselves- it's not a necessary item, but definitely one that is nice to have, and well thought out.

Like a lot of the pull out components on the Ti-Link, this one is well nested and would be a real pain to get out if it weren't for this thoughtful cutout on the back.

Plus, as I said, just about everything is titanium, including this extension driver, and since titanium is non-magnetic, there are small, powerful magnets inset into the driver as well. This means it holds in pretty well- I am not sure I'd have faith that it would stay in place while bungee jumping, but so far it has stayed in pretty good.

It also has a magnet in the socket end so it holds on to bits as well- a nice detail that is often overlooked for the sake of cheaper manufacturing. Dog hair not included. :doggy:
If I had a complaint about it, I'd wish it was actually a 1/4" or 6mm adaptor rather than just an extension. It's always handy to be able to use more standard sized bits, especially since I'm Canadian and we use a lot of Robertson screws here- but then I doubt anyone is going to be replacing their deck with just this bracelet as their only tool, so probably a moot point.
Next up is Link #4, which is pretty straightforward.

It's got a multi-wrench cutout and a small hex bit on the end- and yes, the screws come out all the way so it wouldn't be in the way when using it.

I know some of you smartasses were going to ask about that.

It would be handy for tightening a screw on your Ikea furniture, but I wouldn't want to assemble a whole PAX wardrobe or Ypperlig with it. It would be handy to have on the afore-mentioned fixed gear bicycle, if you had the right size screw for it. In short, it would be handy for small adjustments, but probably not much more than that.
And speaking of bikes....

Link #5 has some spoke wrenches and some standard wrenches built into it. Simple enough, but in this particular case, there's a detail that would escape a lot of people, but not our MTO members because we know better and notice these things- rather than each flat coming to a point, on this each point is drilled out. This reduces stress on the bit, the link and the person using them, allows a place for crap to go and keeps the bit from jamming in there when you put more torque on it than it's normally expected to handle. Details like this show that a designer is someone who actually uses their stuff, and expects others to do the same.
I can't comment on how effective it is, as I haven't really used it for anything too heavy, but it's nice to see tools that are designed by users for users.
Def
-
I know, I know, this thread is taking FOREVER!
Going link by link is getting a bit painful, but don't worry because we are going to scoot quickly through Links 6, 7 and 8 as they are pretty similar.

Link #6 has a flathead on the end similar to Link #2, which is handy if you have already messed one of them up, you get a great opportunity to do it again.

As the bits are steel, no inset magnets are required, and the tiny magnets in the link body seem to hold them quite well. Ditto for Links #7 and #8.
Link #6 comes with T6 and T10 bits, Link #7 has a T8 and a #1 Phillips, and Link #8 has a #0 Phillips and what it says is a Slotted #0. That sounds odd to me, but I will have to look at it closer later. I am at work right now and I left this tool at home.

#7 is virtually identical otherwise to #6, except that it has another hex head on the end instead of a flathead. It also comes from the factory with dog hair on it. I promise. Even though it looks exactly like the hair on my scruffy little white dog, I swear I am not making excuses.

#8 is virtually identical to #6 except that it... well... has different bits?
Also, the screw wouldn't come out, so you get a preview of Link #9, which is one of those Forever Pencils or Eternal Pens or whatever they are called that supposedly last forever, but in case forever isn't long enough, they also include refills. In the case of the Ti-Link, those refills come in green, red, black and yellow, so if you wash up on a deserted island with nothing but this bracelet, you can include lovely artwork with your messages in a bottle.

The pencil is pretty tiny, as one would expect from something that fits in a slot on a bracelet but really just reminds me of a pencil that has been sharpened way too much- you know, the one your teachers would roll their eyes at when you used it.
Still, it works better than not having a pen or pencil at all, so it's worth having. Definitely a nice option than more flatheads or wrench cutouts- you know, the usual stuff that companies throw in to try and make tools look like they have more functions than the next one on the shelf. Really, who needs six different flatheads on a tool?

Def
-
Interesting!
I wonder what it’s made of.
I’d be tempted, but only if it’s titanium.
They should make it in titanium.
-
This is it- the last post on what is not really a review, but an initial look at a tool. I feel like this is the longest initial impression done in a while! :ahhh
The last two were also stuck together, but that's fine as they also kind of go hand in hand.

Link #10 is a whistle, or if you believe the maker, it's a "double holed survival whistle" which I think increases your chances of surviving a plane crash than if you only had a single holed whistle.

And Link #11 has a teeny removable blade that goes with it's teeny fire stick, which secretes itself inside the body of the link itself, which is pretty cool. I haven't tried it yet as I don't tend to have any success with fire strikers at the best of times, and this one being pretty small isn't likely to go any better.


Basically you pull the teeny blade out of the front of the link and fit it into a slot on the backside, which is a pretty cool design, and seems to work well. I haven't tried it, but I also feel like the small curved blade would make a decent package opener. It probably wouldn't work so well for clamshell packaging, but I'd imagine it would open Amazon boxes pretty well.
So, all in all, I kind of like this thing. I think it suffers from the same issues as the Tread, such as the individual links are very tiny, and so the functions they serve are pretty minimal. They are more for show than for go in my opinion, but I do like that there seems to have been more thought put into the Ti-Link than into the Tread.
Yup, I said it.
Given the choice of the two, I think I would take the Ti-Link, although given the choice of either of these or any SAK (or halfways decent multitool at half the price) I would probably take almost anything else instead.
That having been said, there is undoubtedly a market for these kinds of things, and I think this one does a much better job of doing whatever these things do than the Tread- plus it's titanium and that just makes it better by default, right?

Which just leaves me to wonder where they may have gotten these ideas from say, almost a decade ago....
Def
-
@Crunchie64 said:
Interesting!I wonder what it’s made of.
I’d be tempted, but only if it’s titanium.
They should make it in titanium.
I think you are out of luck- I mentioned that to them and they only have plans to continue the line in various types of hard cheeses.
Def
-
On a slightly more serious note, I did just check the manufacturer's website, and this is also available in aluminum. I guess I didn't get the cheapest option available. :ahhh
I got the second cheapest...
Def
-
I don't want to be that guy, but do you remember when people made cool stuff from titanium? Like the SR-71?
-
-
Tools on it looks handy to have but like you say it could need clasp, also it looks too wide for my taste but since i dont have it i could be wrong how it would look and feel on my hand
-
@lister said:
I member all the ... what was it? The guy with one piece tools priced like they were pure gold? I member that.
I assume you mean Peter Atwood?
His stuff was good- you could see the art and design that went into his stuff. But his weren't overpriced, he just followed the Beanie Baby model and offered only limited numbers of the stuff- it was the secondary market where prices really went crazy.
Everyone else that cranked out stuff they came up with off the cuff and decided to try and sell it for a fortune was the real problem with the situation.
As I recall, Peter didn't make a huge fortune off his tools, he made enough to cover production and some modest profit. Resellers and everyone who tried to copy what he was doing all made big $$, at least for a while.
Def
-
I'm not a fan of bracelet multi-tools at all. And nice shout-out to Joey and Chandler. I'd be the Chandler if I got this as a gift.
No word of a lie, after reading your first post and seeing the pics of it on your wrist I was going to comment that if I couldn't also press my palm with my two middle fingers in a "rock on!" gesture and have web fling out, then I don't want it.
About the magnifying glass: true that its more every day use is to read the fine print but even on my Vic Explorer, I expect to be able to use it to make fire if absolutely needed, and on a day with enough dry tinder, leaves, grass. And keep that fire going through the night. You know, in a true survival situation. Here that would be fine. But yes, I mainly use it for looking at small print
Not sure I like the idea of a clasp, since it can be removed easily and by accident sometimes. Then you lose all your survival mini tools. No bueno. Seems like this is not meant for whipping out for just any old reason but more of a Klingon survival multi-tool belt buckle, to get you out of a jam (or a Federation Starship brigg.
Two, no THREE pop-culture references in the same post.
You're welcome.
-
-
It seems interesting. I've owned the Tread for many years as it was a gift from my wife when they first came out. (Not sure how we afforded it then but she's a great wife. :D)
I've actually used mine a few times when I used to work out in the field as the pharmacy staff would ask me to take something apart when I didn't have all my tools with me. It came in handy in a pinch but not something I'd rely on for every day.
I think I would prefer a clasp on the Ti-Link as having to unscrew it to use it might be problematic. I'd rather see one in steel though.
-
@lister said:
Didn't say I didn like them. Just that they were a bit out of my financial reach.
Yours too huh?
I've used my Treads from time to time in the past, but never because I had to. Usually I have to find a reason to use one, or more accurately, have a thing that needs doing and I think "I wonder if the Tread would do that?"
Usually I manage to do something well enough that I could say I could do it if I have to and then switch to something better suited, which is usually pretty well anything else I have handy.
I imagine for most things, it would be a very similar situation with this thing, although I do like that it gives me a few extra options that the Tread doesn't. I wish there was also an option to carry 1/4" or 6mm bits, as I said above, but I do like that it has actual, standard (4mm), useable bits in it- that puts it ahead of the Tread IMHO. With the Tread one has to buy Leatherman specific flat bits and/or the LM adaptor to use standard bits, and honestly, I don't want to do that when I have already paid twice as much for the tool in the first place.

Given that the creator was trying to raise $5,000 to make it happen and they ended up raising over $150,000 I have to wonder if we will be hearing more from them in the future?
Def
-
That looks great!

Can we please have a picture of it upside-down? If you wear it inside-out, does it hide most functions well enough for people to dismiss it?
-
@ReamerPunch said:
That looks great!
Can we please have a picture of it upside-down? If you wear it inside-out, does it hide most functions well enough for people to dismiss it?
It does look a lot less tactical-y when viewed upside down. I'm at the camp now and will get a photo of it when I get home later today.
Of course, 90% of the reason to wear something like this is to show off how kewl you are, so I don't know how great an idea that is!

Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login