Barlow Knife Challenge Sept 2026
-
Day 2
Cripple Creek again today
-
Day 03
Cigar time.

-
Day 3
Worked from home today and got some much needed catching up. Got a package from Vixino and the Barlow helped me free it's brethren. Quick look at the Baby Bronto which gets released today. This is cool to me because with a design of my own being produced by them I get a feel of what they're capable of quality wise.
![ResizedImage_2026-09-03_05-44-12_9989[1].jpg](/assets/uploads/_imported_attachments/migrated/605962_ResizedImage_2026-09-03_05-44-12_9989%5B1%5D.jpg)
![ResizedImage_2026-09-03_05-44-12_0574[2].jpg](/assets/uploads/_imported_attachments/migrated/605963_ResizedImage_2026-09-03_05-44-12_0574%5B2%5D.jpg)
-
Day 3
Barlow in front of a compooter monitor. Yawn.Best wishes. G

[attach id=0 msg=2586758]
-
Day 3
[attach id=0 msg=2586775]
BARLOW stamped on the bolster,
The Ideal U.S.A. On the tang.A pawn shop find a while ago.
This definitely was a $1 knife on display by the register.
The liners are just a tad larger than the scales and the back pin is broken on the back side, so the scale slides.Ideal reminds me of a novelty company that makes throw away stuff.
Surprising is that pull is at least a 7.5 or 8 on both blades and yet a solid seal closing.

-
Day 3
LionSteel Warhorse on cigar duty. Clip point blade has become my “clean” blade on this knife.

-
Your LIONSTEEL is a handsome knife.
-
Nothing going on today that'll require my Barlow except the need for a glamour shot.

-
@LoopCutter said:
Your LIONSTEEL is a handsome knife.
-
A DAY 3 +
[attach id=0 msg=2586792]
Looks good paired together…


-
@LoopCutter said:
Day 3[attach id=0 msg=2586775]
BARLOW stamped on the bolster,
The Ideal U.S.A. On the tang.A pawn shop find a while ago.
This definitely was a $1 knife on display by the register.
The liners are just a tad larger than the scales and the back pin is broken on the back side, so the scale slides.Ideal reminds me of a novelty company that makes throw away stuff.
Surprising is that pull is at least a 7.5 or 8 on both blades and yet a solid seal closing.
I searched for Ideal company history because I was aware of a couple of different manufacturing companies with that name; specifically Ideal electrician's tools and the Ideal reloading tool company which is now owned by Lyman. I found this about the knife company:
"The Ideal Knife Co., a pocket knife manufacturer based in Providence, Rhode Island. It was founded by Dominick & Michael Marseli with Phillip Magioni, and operated from approximately 1924 to 1986. The company made inexpensive folding pocket knives — both solid-handled and shell-handled (they switched to shell-handle construction in the late 1930s). Their knives were widely sold on counter-top displays at gas stations and convenience stores, making them a nostalgic staple for many. Popular models included the Ideal Camper and JR models, especially in the 1970s. They were a separate company from the similarly-named Imperial and Colonial knife companies, also based in Providence. "
And, here's something unrelated but very interesting concerning the Ideal reloading tool company:
"Ideal Manufacturing Company was founded in 1884 in New Haven, Connecticut, by John H. Barlow."
-
Most interesting!
I would not surprised if many of the firms operated out of the same buildings. Just changed names and listed ownership staying one step ahead of investors of banks.
-
<u>Day 3</u>
Used my Colonial Bremco Barlow to cut up a left over hot dog for the doggos.

-
Day 3
Queen Drake Well commemorative Barlow
https://www.queencutleryguide.com/wp-content/uploads/2020/11/Drake-Barlow-1972.-11-24-2020.pdf


-
@LoopCutter said:
Day 3[attach id=0 msg=2586775]
BARLOW stamped on the bolster,
The Ideal U.S.A. On the tang.A pawn shop find a while ago.
This definitely was a $1 knife on display by the register.
The liners are just a tad larger than the scales and the back pin is broken on the back side, so the scale slides.Ideal reminds me of a novelty company that makes throw away stuff.
Surprising is that pull is at least a 7.5 or 8 on both blades and yet a solid seal closing.
Does that speyish shape on the master look original, or aftermarket?
-
@ AC - a list, that is dangerous during challenge month.
Two items worth note; IDEAL is not worth the your time to buy. The one I have is of poor quality, was maybe z prize a carinval or county fair.
The QUEEN knives.
The original QUEEN CUTLERY knives are very good quality if you encounter.
Since, SMKW. Has owned the NAME. MADE THE KNIVES IN CHINA, likely same facilities as ROUGH RYDER. BUT WITH 440C steel. The are well made, my BARLOW is the only I found after I realized the build quality.
Then a few years ago, SMKW pulled the QUEEN BRAND back to the USA, and search for knife shops to produce quality Queen brand slipjoints. Prices double or tripled at that point. It now appears BEAR & Sons are making the SMKW QUEENS, and possibly are be coached on their complete product line. -
@BPRoberts said:
Does that speyish shape on the master look original, or aftermarket?Appears original, no discoloration and back edge finish same from pivot to point.
[attach id=0 msg=2586818]
[attach id=1 msg=2586818]


-
@LoopCutter said:
@ AC - a list, that is dangerous during challenge month.Two items worth note; IDEAL is not worth the your time to buy. The one I have is of poor quality, was maybe z prize a carinval or county fair.
The QUEEN knives.
The original QUEEN CUTLERY knives are very good quality if you encounter.
Since, SMKW. Has owned the NAME. MADE THE KNIVES IN CHINA, likely same facilities as ROUGH RYDER. BUT WITH 440C steel. The are well made, my BARLOW is the only I found after I realized the build quality.
Then a few years ago, SMKW pulled the QUEEN BRAND back to the USA, and search for knife shops to produce quality Queen brand slipjoints. Prices double or tripled at that point. It now appears BEAR & Sons are making the SMKW QUEENS, and possibly are be coached on their complete product line.Thanks for the good info LC, good to know. I'll have to pay attention to Bear and Sons then, though I do prefer something with a few miles on it.
-
@AzteCypher said:
Thanks for the good info LC, good to know. I'll have to pay attention to Bear and Sons then, though I do prefer something with a few miles on it.I really like the looks of the Bear & Son Large Barlow. It's available in 1095 carbon steel too, which I also like.
They have a public sale event at their factory every November. The factory is about 100 miles from me. I'm planning on trying to make it this year. Maybe I'll be able to snag one of those Barlows, in carbon steel and stag handles.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
