powerlock owners club,
-
Thank you Juan and Barry!

JonesE
-
-
Meeee ... never!!!

(But its even better now ... and YOU have the real file, the one that works, and saw too!!!!)

-
Yeah, it is better, not that it was bad before. To tell you the truth, I don’t know how much I will use the Robertson driver. The 1/4” driver will see more use. If I don’t loose the spring.
JonesE
-
@JonesE said:
Yeah, it is better, not that it was bad before. To tell you the truth, I don’t know how much I will use the Robertson driver. The 1/4” driver will see more use. If I** don’t loose the spring**.JonesE
You could add a dab of clear epoxy or CA glue to the spring end's bend or, a small piece of shrink tubing around the base to keep it in place.
-
@Juan el Boricua said:
You could add a dab of clear epoxy or CA glue to the spring end's bend or, a small piece of shrink tubing around the base to keep it in place.Thanks for the tip. I have a couple of PowerLocks that are missing the spring. I will investigate and report back. Thanks again Juan!

JonesE
-
"Tuxedo" Powerlock, with early-type tool "wings"; I don't know why they went with the latter, longer ones, as with these you can have the socket adapter out 90 degrees without taking out the wing.
[attach id=0 msg=2588372]
-
Brought mine out today!

-
Nice combo!

-
-
Thanks guys! That 1st Gen is great!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Anyway, added in the Robertson driver and the 1/4” driver. It worked out well since that eliminated the three Delrin spacers. I did have to swap the awl for the flat driver between handles.

