SAK Stack Challenge 2026
-
I have the Work Champ too, and use it more than any other SAK save my lanyard Classic right now

The mods give a lot of latitude on the badges. I've hosted the SAK Stack Challenge more times than I can remember and I've never had a problem before.
Part of the issue is that, prior to Nix, I don't think (and I could be completely wrong but I've been around awhile) anyone hosted a 111 Challenge before, but they did host a Swiss Champ Challenge. The badge was made up for the specific challenge, not the other way around. When I hosted these challenges, if it looked like a Swiss Champ, it counted. That included CTs, Wenger, etc. My advice is simply to message a Mod and ask. -
@WECSOG said:
It might feel like a 4 layer, but it is still thinner and lighter than a Deluxe Tinker or Deluxe Climber.
I agree with you. If anyone wants to carry a CT-S for this challenge, I've no problem with it. But to me it would feel like cheating.I definitely agree on the CT29 but, on the other hand, CT34 (CT-M) shouldn't feel like cheating. Yes, it's 5 layers technically, but is the same width as a 7-layer (6.5 layer?) Champion C, but you would disqualify it under a new badge?

I'm not commenting to nit-pick or sway you one way or the other, especially since I'm not even participating. :P I understand the rule has to be stated somehow and I suppose it would be silly to say "any SAK wider than Xmm". The variations in widths of layers can make the discussion a bit confounding, especially considering the way the challenge was previously defined...
-
I support the "interpret" (and ask mods to rewrite the description if we really feel it neccesary) the challenge as anything 6+ theory. A new badge feels like it's splitting hairs (we already have Stack and Mad Max), and 6 layers is a clean and objective split (vs going by thickness, which can be affected by scales, etc.)
Either way, I'll actually be going for the Discontinued badge month one with some older Champs/Toolchests. Not sure about the month two plan yet, so no skin in the game.
-
I WAS looking forward to this challenge, as a chance to utilize and learn about others experiences with their same size SAK.
NOW THE TOPIC HAS TWISTED A BIT AS TO
WHAT CAN BE INCLUDED OR QUALIFIES. WHAT THE BADGE GUIDELINE AND WHAT WAS ALLOWED IN YHE PAST.Why not just state what tool you plan to utilize, by your name, and if you do use another, it is that members responsibility to include the tool’s identity and layers in that days post. If it does qualify then it will called out by the host at that time.
- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30). (SwissChamp)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
Just an idea, taken from the BARLOW Challenge.
Some contributions a member thought was a BARLOW, learned that their knife was a JACK KNIVE, or not a barlow just because it was not!IN REGARDS TO THIS SAK Challenge; Right now the inclusion models is quite confusing, as the models described are not even known by this humble member.
-
@NutSAK said:
I definitely agree on the CT29 but, on the other hand, CT34 (CT-M) shouldn't feel like cheating. Yes, it's 5 layers technically, but is the same width as a 7-layer (6.5 layer?) Champion C, but you would disqualify it under a new badge?
I'm not commenting to nit-pick or sway you one way or the other, especially since I'm not even participating. :P I understand the rule has to be stated somehow and I suppose it would be silly to say "any SAK wider than Xmm". The variations in widths of layers can make the discussion a bit confounding, especially considering the way the challenge was previously defined...
I don't feel like the CT-M would be cheating. In fact, as I stated before, I wouldn't say anyone else is cheating if they bring a CT-S to the table. The rules allow it. Perhaps "cheating" is too strong of a word, so let me rephrase it: the CT-S wouldn't be my choice because I routinely carry knives larger than the CT-S. In a way it's a good thing that it is included, because there are potential participants who work in an environment where even the CT-S is stretching it. For those folks, the CT-S (if you have or can find one) is a good way to participate in this challenge because it is more capable than any other SAK of its size.
The idea of creating another badge is not something I am advocating for; it was just an idea another member floated. What would and would not be included was pure conjecture on my part, and was based entirely on eliminating any outliers from the basic 6+ layer description.
As it is, I think this is a great challenge and I don't want to take anything out of it nor make it anything it's not. I also don't want to disqualify anything that fits the spirit of the challenge, just because it doesn't carry the right name. Wenger Monarch, for example.
@BPRoberts said:
I support the "interpret" (and ask mods to rewrite the description if we really feel it neccesary) the challenge as anything 6+ theory. A new badge feels like it's splitting hairs (we already have Stack and Mad Max), and 6 layers is a clean and objective split (vs going by thickness, which can be affected by scales, etc.)Either way, I'll actually be going for the Discontinued badge month one with some older Champs/Toolchests. Not sure about the month two plan yet, so no skin in the game.

-
@LoopCutter said:
I WAS looking forward to this challenge, as a chance to utilize and learn about others experiences with their same size SAK.
NOW THE TOPIC HAS TWISTED A BIT AS TO
WHAT CAN BE INCLUDED OR QUALIFIES. WHAT THE BADGE GUIDELINE AND WHAT WAS ALLOWED IN YHE PAST.Why not just state what tool you plan to utilize, by your name, and if you do use another, it is that members responsibility to include the tool’s identity and layers in that days post. If it does qualify then it will called out by the host at that time.
- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30). (SwissChamp)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
Just an idea, taken from the BARLOW Challenge.
Some contributions a member thought was a BARLOW, learned that their knife was a JACK KNIVE, or not a barlow just because it was not!IN REGARDS TO THIS SAK Challenge; Right now the inclusion models is quite confusing, as the models described are not even known by this humble member.
Any Cybertool and any SAK that is 85mm or larger and six or more layers. That's as simple as I can make it. Basically if you go to SAKwiki and click on the "+" button in the layer count breakdown, it will show a list of SAKs of that particular size that probably qualify. I only see "+" layers on SAKs under the 85mm, 91mm and 111mm lengths.
Anyone who has a question about whether their SAK qualifies, feel free to ask. Or as Loopcutter says, post it by your name and if anyone has a comment about it, we can discuss it. Or, discuss it by PM.
-
That works for me.
My only problem is... I need to organize which one I'm going to use first the Cybertool or something 6 layers and larger first. Or should I go with the largest layer size back down to 6 layers and then the Cybertool.
I better hurry though because we're only 7 days away from finishing up the Barlow challenge and I'm not ready for this one.
Ahhhh!!!!

-
@AzteCypher said:
That works for me.My only problem is... I need to organize which one I'm going to use first the Cybertool or something 6 layers and larger first. Or should I go with the largest layer size back down to 6 layers and then the Cybertool.
I better hurry though because we're only 7 days away from finishing up the Barlow challenge and I'm not ready for this one.
Ahhhh!!!!

I'm sure you will think of something! 
-
So, to reiterate: if you go to SAKwiki, along the right side of the page, each basic size/family is listed from largest to smallest, by manufacturer. Out from each size is a layer list: 1, 2, 3, 4, 5, and +. Some sizes only go as high as 3 or even 2 layers. The only ones that have a "+" are Victorinox 111mm and 91mm, and Wenger 85mm. There are also some "+" layers under 85mm Delemonte collection; those are good too. They're just Wenger designs that were produced after the Victorinox takeover.
I've looked at everything listed under the "+" layers, and found only one that would probably be disqualified. That one is the Wenger SGT Shortix Plus. If you look at it, you will see why. Of course if you happen to have one in your collection and really want to use it, it might be possible to make an exception. Especially if you happen to have SGT gas chromatography equipment and plan to use it to maintain that.

After all, it is large and heavy enough.Outside of the "+" layer SAKs, any Cybertool qualifies.
-
got it.... -
I'm super duper excited for this challenge. I keep looking at the Swiss Champ on my kitchen table with longing... of course, I'll miss my Barlows when I'm on the other side of it!
-
I'll miss the Barlows as well. I'm going to have to do a month or two of no challenges just so I can carry my Barlows again.

-
I like my Swisschamp so much that I bought another, much older one.

-
Excited for this one and glad any Cybertool variant counts. I am traveling out of country in early November and th
the Cybertool 29/S will be a safer option to bring vs oneof my larger ones. But over 60 days, I will get a chance to use them all. -
@MrToolJunkie said:
Excited for this one and glad any Cybertool variant counts. I am traveling out of country in early November and th
the Cybertool 29/S will be a safer option to bring vs oneof my larger ones. But over 60 days, I will get a chance to use them all.
-
I've checked the (+) on SakWiki and I'm good to go. Mainly I'll use my SwissChamps, but I have some other cool SAK that qualify and they don't get much use. If I fail, it won't be the first time I face planted on a challenge.

- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30). (SwissChamp)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
- Fireman (30)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

