SuperTool 300 Knifeless
-
I've been eyeing a Knifeless Rebar for a while, but really prefer the SuperTool 300 size.
All the tool swaps come from a 300 EOD, a 300M, and the scissor from a Victorinox SwissTool X.
The marlinespike is turned down from the c4 punch and mirror polished. The scissor is drilled out with a 3/16" carbide drill bit and reamed to 4.8mm, @the rear locking surface is modified so it will lock open, and a dimple is drilled so it engages the factory detent.
I still need to round over the corner of the punch cutout. I have a custom awl with wire stripper notch and cap lifter en route. This will allow me to install one of the remaining flathead screwdriver tools again. I'm 3d printing a KVP style toothpick and tweezer hold with magnets to live under the scissor, and designing a holder for the side with the metal saw to store the wood saw.
-
-
-
-
-
-
-
@TexasAKM said:
Fine workmanship! Great looking tool.
You said the marlin spike was turned down, do you have a lathe, or access to one?I have access to one, but truth be told I was to lazy to setup the lathe for this one. I chucked it into my drill press, grabbed a big 1.5" file to do the initial shaping, then a double cut file before polishing in stages up to 10k.
-
@JonesE said:
That is a fantastic and handy looking tool. That scissors mod. 
JonesE
The scissors were the hardest part, deciding to destroy a SwissTool for the scissor is still pretty crazy, thankfully it was a TSA resale one I paid $20 for. Carbide drill bits are necessary, anything else will make you question your life choices.
This scissor has good lockup and works great, but I may pull it off drill the hole oversized and press in a bushing to resolve the tiny bit of play it has.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






Looks fantastic! I love the Supertool size and format. I really like what you did here! 
