SAK Stack Challenge 2026
-
Day 30 + mini challenge
Swisschamp oversees two slightly modified SAKs - I added a pen to Waiter and quattro screwdrive to Compact scales (I haven’t done any changes to my stack contenders so I use the waiter and compact as representatives for the mini challenge).
This is it for me - I do not continue for 60. It was very interesting challenge. My usual carry is a single layer 84/85mm paired with 58mm for scissors so to carry 6+ layers was really special. I learned that it is possible and especially my Wenger Motorist, Victorinox Craftsman or CT34 are not that bad to have in your pocket all day. But Swisschamp is too large for me. As well I did not need the extra tools on a daily basis so I will revert back to a lighter carry and put the Swisschamp to my backpack pouch to be ready for the unexpected.
Thanks to WECSOG for hosting and to all for interesting posts and pics! Good luck to those who continue to 60!
[attach id=0 msg=2592469] [attach id=1 msg=2592469] [attach id=2 msg=2592469]



-
@AzteCypher said:
<u>Day 27 - catsup</u>I was trying to unbend the pliers spring when I felt it go soft on me.
I'm assuming the scissor spring fits into the pliers as well? 

Scissors spring works on pliers too, i have changed spring on my SwissChamps pliers when it broked
-
The blob
This featured as background for yesterday's picture. The statue in the village of Nuland represents land and water and that's about all I know about it. The locals think it's an ugly piece of modern art but I happen to like it.
Today is my last day in the stack challenge. I think I'll finish with a brew. Good luck to those who go for 60 days!

-
Day 30
I just got the full vocal treatment from Werecoyote. There was a program in eastern NC to try to re-introduce red wolves. There was a breeding program. Their red wolves had coyote DNA in them. Some claimed they were red wolves. Others said they were hybrids. Detractors said they were just genetically altered coyotes that would only breed with the local coyotes and cause more problems. Like the already non-native coyote population. The program was a complete failure. Workers said they had recovered all the surviving red wolf population and moved them out. The Wildlife periodical that you can pick up from hunting and fishing agents had drawings and descriptions of how to differentiate red wolves from coyotes. There was an admonishment to not shoot red wolves. If the entire population was accounted for and moved, why did the NC Wildlife people put in a no shoot warning. I hear coyotes. Sometimes I see them. I catch them on night vision cameras. Probably 12 years ago or so I had a run-in with a mystery animal. Too big for a coyote. Non-typical coloration. Acted differently than a coyote. Definitely not a dog. That was on the property where the aged farm house that I call home is situated. I think it is this same animal species that has such a distinctive howl. The thing I call a Werecoyote. Can't prove it. Whatever it is runs with a coyote pack and is likely the dominant animal. Red wolf? Don't know. The original animal I saw would be rather old by now. Likely dead. Perhaps an offspring from this thing and a dog or maybe a coyote. I used to see coyote/dog hybrids. Not anymore. Evidently coyotes will breed with other coyotes once the population is great enough to make that a possibility. Otherwise they get frisky with dogs. Maybe some still do. Anyway, this critter just finished doing its horror movie vocalization. Any child carrying a bag for goodies and wearing a plastic witch's mask would run screaming with candy flying in all directions if they heard this thing in the bushes. So would I. I saw people buying a few $3.99 pumpkins at W-Mart yesterday. Looks like there will be plenty for the store to discard. Judging by the levels in the pallet boxes full of orange winter squash. Time for the last post of the challenge and a mini-challenge entry. I don't have any sort of mods on my one and only SwissChamp. I substituted a red Spartan. No key ring nub and a replaced scale on the side shown. When I bought this thing, it had one scale that was partially melted. I think it was dissolved by some sort of glue. That scale was indeed glued on. That's about it for a SAK mod. Maybe we will meet again on a future challenge. I got out my Opinels and dried the handles with a hair dryer. That loosened up the very sticky blades a little. I was tempted to throw the wood handled ones down through the bushes outside. I think I will put them on the dash of my truck and let the sun bake them a few days. The joints have been treated with beeswax and whatever else is in some lip balm. Probably petrolatum. That worked for a long time. I will discard them altogether before I soak them in oil. I have seen enough oil-soaked wood to do me.Best wishes, Gary (IMR)
[attach id=0 msg=2592479]
-
<u>DAY 30</u> Made it! I may or may not go on to 60, but I will check in to follow those who conitnue. For my maybe last pic, here is a stack sammich.
[attach id=0 msg=2592480]

-
That looks like the beginning of an XXXCVT fireman!

Another 30 days gone! It's always fun doing challenges with a good group of people like we had here! Gary, the dashboard trick sounds like a plan. I think I'm going to put my No. 8 on the dash today and see how it goes.
Best of luck to the 60 day challengers!

-
Day 30
Today, we arrived COLOGNE, docked in a unique side harbor. And later this morning a second boat docked along side ours.
I stayed on board, my daughters venture inyy to o town for walking tour, returned for lunch with dad and now returning to window shopping.
This morning took my day 30 pics of the SC, while on the top deck in sun.
[attach id=0 msg=2592492]
[attach id=1 msg=2592492]
JThese are tools most frequently used on the SC or CHAMPION.
ALSO, a couple more pictures of structures
[attach id=2 msg=2592492]
[attach id=3 msg=2592492]




-
Day 30
Friday mini challenge[attach id=0 msg=2592493]
This is my altered SWISS CHAMP.
It arrived at my address after being purchased from the auction site, as a SILVERtech with a VIC Sheath, a bargain double but for less than either separately.
[attach id=1 msg=2592493]
Then a mere mention of searching for a Sapphire model, a member’s wisdom was injected, “change scales.
[attach id=2 msg=2592493]
SilverTech scales removed and SAPPHIRE BLUE installed. Plus liners were scrubbed clean of a black residue while scales were off between fittings.



-
Day 30
I'm having a nice cold brew.

-
- Two stacks and a little buddy.

[attach id=0 msg=2592502]

- Two stacks and a little buddy.
-
Big thanks and congrats to everyone who came along on this challenge!

Great submissions on the mini challenge!
I'm looking forward to the next 30.Day 30 + mini challenge
This is my early (1985?) Swisschamp. It doesn't have a hook. It also didn't have a pin, nor the slot for one. It did have Plus scales but pre-pin. The original scales were also somewhat beat up. So I got a new set of Plus scales in translucent red. New tools, pin and lanyard. Really more of an update than a mod. I also added the micro screwdriver to the corkscrew. I don't know if it originally had one, but if so it was missing. Lastly, I added a small magnet which lives on the inside of the pliers.

-
@Antti Lammi - Perfect. Thank you for that info. I think I have a donor SAK I can pull the spring from.
@Ron Who - I was wondering what that was. It does look interesting and colorful.
@IMR4198 - We grew up with coyotes so they're normal to us but they can be a nuisance. I used to raise chickens when I was a kid. Until we built a brick wall fence around our yard, since we lived near the outskirts of the city, I had to worry about coyotes trying to get to my chickens
<u>Day 28 - catch up</u>
Just package duty, nothing of interest unfortunately.

-
Thanks for the badge. That was one badge that I wanted. How about some fall colors? Best wishes, G
[attach id=0 msg=2592515].jpg)
-
Day 30
I don't know if a lanyard fob and a home-made suspension clip count as mods or not. I purchased this Swiss Champ about 2 years ago from a pawmshop for $12. The tool was in very rough shape. It looked like it had lived in a fishing tacklebox for an extended period of time. Oxidized liners and rusted tools were nearly inoperable. Oil, some fine abrasives, some elbow-grease and some compressed-air yielded a fine tool with good snap and smooth action. I enjoy using the Swiss Champ, and it rides fairly unobtruseively in my left front pocket by the suspension clip. This was my first challenge here on MTO and it has been fun! Thanks to @IMR4198, Gary, for the pointers and encouragement! Thanks to @WECSOG for hosting this ongoing challenge! Thanks to the fine mods who volunteer so much time! Thanks to @ Mr. Grant Lamontagne for such a great forum! Thanks to Victorinox for such fine iconic knives and tools, and thanks to everyone for your kind comments and participation!
[attach id=0 msg=2592525]
-
The colors are quite vivid. The phone camera doesn't show them the way they really are. Temps are mid 70-ish today and clear skies. Perfect time for the too-tight Opinel test.
I placed two wood handled No. 8s on the truck dash. Slot sides turned up. That was just before 11AM. I went back at 3PM to check on them. The metal parts were too hot to touch. Just like a metal seat belt part or steering wheel would be during a warm day in the full sun. One hornbeam and one beech. One clear varnish finish and one painted blue Colorama.
Now both can be opened more easily than when they were new. Not a permanent fix, naturally. Humidity, etc. They wouldn't flop open, but I could easily open either by pinching the blade. Using the nail nick wasn't even necessary. Blades swung all the way open. One unexpected result. The lock rings were completely loose. The wood swelled up enough to grip the blades, but it also had expanded outward enough to make the locking rings tight as well. Complete cure. Four hours was plenty.
Finish of the knives was completely unaffected. Rings and blades cooled to the touch in 10-15 minutes inside a rather cool house and both Opinels are loose as a goose. Definitely try it if your knife blades or rings are difficult to manipulate. Naturally the heat generated inside a closed vehicle wouldn't have any effect on the blades. Best wishes. G

-
Day 30 and Mini-Challenge 5


Showing off my recent customizations.
- I mailed this scale-swapped Explorer (now, "Explorer Plus"!) to a friend today, along with backup toothpick and tweezers (in black, in case she likes the color better than stock).
- I also recently added a black toothpick and tweezers to this One-Handed Trekker, which looks very striking.
- Now that I think of it, I also recently added this little red lanyard to the Swiss Champ's keyring! I thought about swapping its T&T to red as well, but ultimately decided I liked the look of the stock T&T better.
Great mini-challenge! I'm now 50% through the 60-day SAK Stack Challenge!! Congrats to all who are finishing today :)
-
nice modsLike last challenge- I cant seem to access the icon to request the badge? Screen is landscape but still off screen ?
Any help appreciatedNever mind? Got it!!
-
Day 28
Tried to post yesterday, but got an error. Planning to use today to finish catching up to 30, and then reset for another badge (but still with a STACK-compatible knife) so I can stay in the thread with awl you fine people.
Took apart an old phone at work. Trying to get the ringer/bell off. The screw is stripped and I didn't use the metal saw yet, so...
The metal saw sucks. We already knew that.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login