The SAK Whittling Club
-
@TazzieRob said:
That is a nice looking knife

I initially found the design somewhat off putting visually. (And I still don’t think it is ideal for general utility use.)
But when I held one in my hand, I realized it actually makes a lot of sense for what it was designed to do.
-
I have a Seahorse and I am not a fan of it at all. The main blade is way too thick. So it just sits in my collection at this point.
-
@MTSAK said:
I have a Seahorse and I am not a fan of it at all. The main blade is way too thick.I understand where you’re coming from.
The main blade is quite thick, especially at the tang and the spine near the tang. But it tapers significantly from the tang to the tip, and is flat ground, resulting in an acute point that is strong with minimal flex.

-
OOPH!
Small Congress (3 1/8") $135-$150 AUD plus shipping
Seahorse $160-$210 AUD, plus shipping.Can usually get a Vic Hiker for less than $50
Rough Rider versions roughly 1/3 price of Case
-
@TazzieRob said:
OOPH!Small Congress (3 1/8") $135-$150 AUD plus shipping
Seahorse $160-$210 AUD, plus shipping.Can usually get a Vic Hiker for less than $50
Rough Rider versions roughly 1/3 price of Case
Case was never going to be the low-priced option, though they are a bit cheaper over here (even factoring in the exchange rate; all prices in USD). Small Congress $70 - $90; Seahorse $80 - $120 (not counting things like Yellowhorse Customs, which go for a massive premium).
Vic Hiker around $36, so that’s pretty comparable given the exchange rate.
Most RRs here around $20, give or take. The higher-end Rough Ryder Reserve line is more like $50 - $60. Not sure if you have any RRs, but my opinion is that while they tend to be somewhat chunkier/heavier and less refined than Case’s designs, F&F is generally excellent, they are functional knives, and good value for the money.
-
@nate j said:
Case was never going to be the low-priced option, though they are a bit cheaper over here (even factoring in the exchange rate; all prices in USD). Small Congress $70 - $90; Seahorse $80 - $120 (not counting things like Yellowhorse Customs, which go for a massive premium).Vic Hiker around $36, so that’s pretty comparable given the exchange rate.
Most RRs here around $20, give or take. The higher-end Rough Ryder Reserve line is more like $50 - $60. Not sure if you have any RRs, but my opinion is that while they tend to be somewhat chunkier/heavier and less refined than Case’s designs, F&F is generally excellent, they are functional knives, and good value for the money.
Yeah, with import duties and all that we pay about double for American stuff, like Leatherman etc, not just a direct exchange rate comparison.
Given our English Colonial heritage, i'd say Sheffield cutlery brands would possibly be more prevalent here.
I have asked my Dad what old pocket knives he might have lying around. I remember on the farm he always had a Barlow style, bone scale 2 blade pocket knife. I also remember one stormy night he was in the shed trying to free up an old stuck knife and somehow it slipped, and we had to drive the 18km into town in lightening and thunder for him to get it stitched up.
My fist pocket knife was a SAK, maybe an Angler or Fisherman, I can't really remember, but it had a fish scaler and didn't have pliers. My Great Grandparents bought it for me for my 6th birthday, 1989. Unfortunately I lost it out of the sheath on my belt whilst chasing cattle up some rough bushy back paddock on the quad, so i bought a Vic Huntsman to replace it, which I still have ~30+ years later. I've had SAKs therefore, a majority of my life.
-
This is one of my Dad's old pocket knives, a Joseph Rogers Barlow with clip point and pen blades.
The clip point needs some of the blade stop grinding down to get the tip back into the frame, and an edge straighten. Then it all needs a good clean and sharpen. The scales are some sort of plastic and appear to have shrink, could potentially replace with some nice Tassie hardwood.[attach id=0 msg=2569260]

-
How's everyone been?
I had an idea to turn the Phillips driver on my whittling Hiker into a V-gouge, in order to try and maximise the number of tools that were capable of doing a cutting task.
A while back I left a comment on a Felix Immler YT video and he replied, saying he has tried it, and it worked, but it worked better on the in-line phillips, which makes sense as it will have better reach. Never the less, I finally pulled my finger out and took it to the bench grinder and diamond stones. Still some tweaks to do, but it currently has an edge of about 1mm.[attach id=0 msg=2593006]

-
[attach id=0 msg=2593007]
[attach id=1 msg=2593007]
[attach id=2 msg=2593007]
Little Huon Pine Hedgehog



-
@TazzieRob said:
[attach id=0 msg=2593007][attach id=1 msg=2593007]
[attach id=2 msg=2593007]
Little Huon Pine Hedgehog
Nice work! I would never have thought to turn a Philips driver into a v-gouge, but it looks like it works great! Love the hedgehog as well!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login