SAK Stack Challenge 2026
-
Day 37
Didn’t realise I was getting a Transformer too :D

-
Didn’t realise I was getting a Transformer too :D
Looks like an Autobot to me.

<u>Day 36</u>
Mail call from SOS24. It's some file paper that I'm going to use on my SAKs. Check out her thread.

-
Day 36

The Swiss Champ and a few SAKs that I've been missing carrying. Don't worry guys, you've not been forgotten!
-
@mathmitch7 said:
Day 36
The Swiss Champ and a few SAKs that I've been missing carrying. Don't worry guys, you've not been forgotten!

I really like the grippy scales on those old 85mm Wengers and more recently Vic Evos.
I know some people hate them but i like the extra traction they give youVery nice scales on the 65mm, which model is it Mitch?

-
Day 37
In the sandpaper thread, IMR4198 mentioned Felix Immler adding a piece of emery board or something to a SAK as a sharpener. I'll have to go look for that video, to understand what he did.
But, it reminded me of something I made about 25 years ago. You know those little tubular fuses that you find in all sorts of equipment? Cars used to use them, but no more. Most of them are glass, but some are ceramic. I ran across one of the ceramic ones, and it occurred to me that it might work as a tiny knife sharpener. So I soldered a number 10 ring terminal on one end and carried it on my keyring for the next several years. Here it is, on the split ring of my Champion.
You can buy these fuses from Amazon among other places, if you have something that uses those fuses. Or, if you ever scrap any electrical appliances, you might find one. I know that microwave ovens in particular, usually have one of these ceramic fuses on the control board. Old microwave ovens contain all kinds of useful components, including a transformer that can be used to build a small welder. You've gotta know what you're doing, though. There's a capacitor in there that could have a lethal charge on it.

-
I have always found that a ceramic coffee mug is around through the day. Turn over, after it is empty of course and work the blade on the unglazed ring edged on the bottom.
Never thought about the ceramic fuses, used them back in the 70s and 80s for mostly power supplies on computer gear. Handled the heat better than glass fuses.
-
My 71 VW Camper had ceramic fuses. They were great! They were easy to see if they were snapped
If you all will have me, I'd love to see this challenge through to Day 60! I can play catch up or stay a few days longer at the end.
For Day 31

-
@Barry Rowland said:
My 71 VW Camper had ceramic fuses. They were great! They were easy to see if they were snappedIf you all will have me, I'd love to see this challenge through to Day 60! I can play catch up or stay a few days longer at the end.
For Day 31
I remember those torpedo fuses. My VWs had them, and iirc my Mercedes did as well. That was a great car btw. 1973 220D with the manual transmission. 3.92:1 gears and no overdrive, but it would (eventually) make it to 90+ mph and still get 28 mpg at that speed! It was only 66 hp when new, but mine had a half million miles on it. Those speeds and mpg numbers were GPS verified because the speedometer no longer worked.
Glad to have you onboard for the full 60, Barry!
-
The ceramic fuse is a great idea! And I tried the coffee cup idea, but I'm not sure what I did wrong....
-
In the sandpaper thread, IMR4198 mentioned Felix Immler adding a piece of emery board or something to a SAK as a sharpener. I'll have to go look for that video, to understand what he did.
https://www.youtube.com/watch?v=YQHbwTKMmys Still reading along on the challenge thread. Best wishes. G
-
Day 36
The Champion with coffee.
-
@LoopCutter said:
You keep putting up pictures like this, you may just tempt to find one just to say I
Am like ECHOTECH down under.I am sure my grandkids will go W O W !

:D you won’t be disappointed if you do LC

-
I wonder why the youtube video I posted up there is showing up as a link instead of a video window.

-
<u>Day 37</u>
I know, I know... they're not good for me. But the SC made me do it.


-
Those look delicious AC 🤤

-
Day 38
SC feels a bit smaller than it did a few days ago!

-
@IMR4198 said:
https://www.youtube.com/watch?v=YQHbwTKMmys Still reading along on the challenge thread. Best wishes. GThanks Gary!

-
Day 37
Toothpick today. Nothing special.

-
Day 6
The old Pioneer wire stripper is probably my favorite, but this one is fine.
[attach id=0 msg=2593214]
Probably my best mag shot so far.
[attach id=1 msg=2593214]
TOOL USAGE:
Outdoorsman: <u>25/25</u> ALL USED
<u>Large blade: Bread bag</u>
<u>Small blade: Open butter</u>
<u>Corkscrew: Bandana Knot</u>
<u>Can-opener: Box</u>
<u>with screwdriver: Lock</u>
<u>Cap-lifter: Mexicoke</u>
<u>with screwdriver: Scraper</u>
<u>and wire stripper/bender: Sump cord</u>
<u>Reamer/Awl: Drink lid</u>
<u>with sewing-eye: Belt scraps</u>
<u>Keyring: Pocket </u>
<u>Tweezers: Splinter</u>
<u>Toothpick: Yep</u>
<u>Scissors: Keyboard</u>
<u>Multipurpose hook: Posing</u>
<u>]Wood-saw: Ruler </u>
<u>Fish-scaler: Unstopping glue</u>
<u>with ruler: Saw </u>
<u>and hook remover: Apple</u>
<u>Fine screwdriver: Hammer screws</u>
<u>Inline Phillips screwdriver: Sink cabinet</u>
<u>Magnifying glass: Pen tip</u>
<u>Wood chisel: Salt</u>
<u>Mini screwdriver: Balance</u>
<u>Straight Pin: Balloon</u>**Champion Plus: <u>29/29</u> ALL USED **
<u>Metal-saw: Phone disassembly</u>
<u>with file: Nail file</u>
<u>and cleaner: Nails</u>
<u>Pen: Balance</u>Swisschamp: <u>32/32</u> ALL USED
<u>Pliers: Staple
Crimpers: Sorta
Wirecutter: Old sump power cable</u>Swisschamp XLT
<u>Bit-driver: Harddrive removal</u>
<u>Bit holder: Storing bits!</u>
Pruning Blade
Electrician Blade
<u>Different Wire Stripper: Different wire</u>
Spatula

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login