Flick out plier's
-
Ok, then are there any real life downside's to the flick out plier's ???
Niggely little thing's like a rattle I can probably live with, but are there any more glaring fault's :-\
-
When I need them, it's convenient to flick the pliers out. When I need a knife, or a file, or a driver, or any other tool, it's annoying that you MUST flick the pliers out. :(
-
The handles don't feel like they can take the same kind of squeezing pressure as butterfly opening tools can. I am certain they will, but they simply don't feel as sturdy as other types. They also don't open very wide compared to others, which can be a pain when trying to get at or use certain tools. The MP600 bottle opener is completely useless for opening stubby bottles because it simply cannot reach the cap.

The handle, when closed impacts the shoulder of the bottle and won't allow the bottom part of the cap lifter to slip under the lip of the cap. When you open the handles, they come in contact with the bottle lower down, and again keeping the bottom part of the cap lifter from getting at the cap.
As with anything, there s a certain amount of give and take- since the handles are a "U" shape with the rounded part of the "U" being on the outside, they are generally quite comfortable to use.
Def
-
The 'rattle' of the plier head never concerned me as being faulty or weak...it's a part of the design. They need some slack so they can be easily extended and retracted.
-
Everything in life (and multitools!) is a trade-off. With a Gerber you get faster pliers :)............but slower knives and tools :(
-
It's not actually that awkward as the pliers tend to flick open with even a fairly gentle wrist action- not like some other multis where you have to actually open the pliers manually. It's even less effort than it takes to flip open a butterfly type tool. I know it sounds odd, but it's actually a pretty decent system.
Def
-
Hmm, I'm definately going to get one, one day ::)
-
There was a customer who had his Ducati Monster for sale...$2,500.
It ran fine, but apparently his kid tipped it over, and there was some dents and scratches on one side. Apparently the price plummets if there's some cosmetic damage.
-
@Corrugated said:
There was a customer who had his Ducati Monster for sale...$2,500.It ran fine, but apparently his kid tipped it over, and there was some dents and scratches on one side. Apparently the price plummets if there's some cosmetic damage.
The prise for cosmetic part's is nothing short of horrifiying :o :o
I don't no about the newer monster's but the older pre S4 model's if they fell on there exausts they'd bend the frame as well >:(
Duke's are one of those bike that will NEVER be cheap to put back on the road, but when they are working perfectly, they really are beautiful motorcycle's :)
-
@micky d said:
Ok, then are there any real life downside's to the flick out plier's ???Niggely little thing's like a rattle I can probably live with, but are there any more glaring fault's :-\
My first multi was a gerber...I used it a LOT..Then I got a super tool. The only thing I missed was the flick out pliers. I never was a true fan of the gerber, even though I used it so much..but it was all I had. The screwdrivers were too short, the bottle opener was non-existent, and the file didn't have a 3rd side metal saw. However, I still wish I could transplant the serrated blade from that gerber to my current LM. IMHO, the only good thing about the gerber was the fact that it had one handed pliers...everything else was kinda crappy. :(
-
@micky d said:
Ok, then are there any real life downside's to the flick out plier's ???
Niggely little thing's like a rattle I can probably live with, but are there any more glaring fault's :-\
. IMHO, the only good thing about the gerber was the fact that it had one handed pliers...everything else was kinda crappy. :(
Maybe that explain's there lack of popularity then ???
-
I don't find the tools on any of my gerbers crappy, yes they may not be as good as some other makes, but they are quite servicable, and for the most part the tools are a lot cheaper than the other brands, which isn't a bad thing! The pliers are so handy you'll miss them on any other tool you use, and they have even got tools with one handed blades (is it the freehand?) so you get the best of both worlds there. The screwdrivers may be stubby but they work very well as long as the screw isn't too far recessed. In my opinion Gerbers are fantastic tools at a great price and are very creative with what they do, what innovations have leatherman come up with? apart from a replaceable bit driver? most of their tools follow a pretty basic formula with just a different set of tools or materials. Gerber have replaceable wire cutters, a saw coupler and one handed pliers.
ermmm yeah....buy a gerber! :D
-
@Roadie said:
I don't find the tools on any of my gerbers crappy, yes they may not be as good as some other makes, but they are quite servicable, and for the most part the tools are a lot cheaper than the other brands, which isn't a bad thing! The pliers are so handy you'll miss them on any other tool you use, and they have even got tools with one handed blades (is it the freehand?) so you get the best of both worlds there. The screwdrivers may be stubby but they work very well as long as the screw isn't too far recessed. In my opinion Gerbers are fantastic tools at a great price and are very creative with what they do, what innovations have leatherman come up with? apart from a replaceable bit driver? most of their tools follow a pretty basic formula with just a different set of tools or materials. Gerber have replaceable wire cutters, a saw coupler and one handed pliers.ermmm yeah....buy a gerber! :D
Are you on commistion ;) ;D
-
Oh i wish! I only have 3 gerbers, although that may be 4 by the end of today......
-
Well i'm after a mp400, and i have the precurser to the mp600, mp600 and the Legend 800. There's one on ebay that i have my eye on so lets hope the price doesn't get too high!
-
@Roadie said:
Well i'm after a mp400, and i have the precurser to the mp600, mp600 and the Legend 800. There's one on ebay that i have my eye on so lets hope the price doesn't get too high!Ebay's a fickle thing, sometime's you get lucky, other time's something goes for a stupid amount ::)
Anyway best off luck with the bid mate, and let us know how you get on :)
-
Flick out pliers are what make this tool the multitool. If you loosen the axle screw 1/4 turn one you have flicked the plier head out, hold one of the handles and pull back the Saf T Lock the handle tools will drop half open so by useing your finger you can select the tool you need forward while moving the others back. The friction of the lock plate helps while selecting the tool. Turn the tool round and draw back the plier head and this makes sure it is impossible for any tool in use to shut on you even if you catch the Saf T Lock. This means the whole tool can be operated one handed. Try that with any of the butterflies.
Gerber screw driver do the job but a simple bit adapter opens up the world of 1/4 hex bit in just about every screw design ever made.
As I have said before no sliding mech/ no multi tools for me.Dave
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



