ST 300 owners club
-
I can't believe the guy posted that on YouTube. I would have been way too embarrased to post that video.
Of course, I am a big guy, so if I had that much trouble closing it then that would have been pretty bad.
-
new ST300 video:
although it seems this is his first MT, i got the manual out before being able to close it

Not exactly a shining testimonial for Leatherman was it? :P Opening the box with a swiss army knife, can of WD40 at the ready, and bulging biceps trying to close the tool. ::)
We got Butthead, now where the heck is Beavis?

Did he seriously just cut himself...?

:D What a Jerk...
(anyone we know..) 
I don't think I really need this, having the ST 200 now and the Core.. ;)
But of course, if I stumble upon a cheap BO, I would grap it instantly.. :D -
Life is funny.
What are the odds of my getting both the two that I ordered from the local shop and the one I won from geoemt as part of the American Red Cross donation on the same day? I kid you not, I picked up the two and when I got home, I had the other in the mailbox.
-
That's pretty funny man. Hope you enjoy all of them.
Pick up two more and you've got one for every day of the work week.
-
@cliosguy said:
finally! a video!not mine tho
I just noticed this thread and was happy to see cliosguy linked my video to the forum. Now I know why my video got as many hits as it did. Thanks cliosguy,
As any of you that watched the video know, I don't claim to be an expert. I was looking for a video on the Super Tool 300 and couldn't find one. After I bought one there still wasn't a video on it so I decided to at least give someone a chance to see what it looked like compared to the Core. The same story with the Freestyle video I did. As far as the Super Tool 300 goes, I like it. Then again I like pretty much everything Leatherman makes. :ahhh Thanks again cliosguy!1Jump2Many
-
1Jump2Many, great video! Hope that you like the ST300. :ahhh
Guillermo
-
What are the odds of my getting both the two that I ordered from the local shop and the one I won from geoemt as part of the American Red Cross donation on the same day? I kid you not, I picked up the two and when I got home, I had the other in the mailbox.
PICS Chako PICS!!!

-
So,help me out here.
I was all set to purchase the ST 300,But after reading thru this thread, i'm not so sure.
Is it one to get or look at something else?
-
-
@ryan1976 said:
So,help me out here.I was all set to purchase the ST 300,But after reading thru this thread, i'm not so sure.
Is it one to get or look at something else?
It does seem to have a lot of Core in it , bar the new 8) plier head & clumping 'feature' + handle cut outs for glove wearers. The Core is a very good MT so there should be no reason why this one would not be equally good
.Me I happy too wait a little while for the price to drop & if I can get a bargain I will be tempted. I have a X2 Core's(BO +SS) , Supertool & X2 Supertool 200's(BO + SS) so my need is not great ::) ::) ::) ::) :D :D :D :D
-
"reasons"? "needs"? who the hell are you people :ahhh
i have beta tester blood and a taste for changes so usually is only the money that keeps me from buying stuff :D
dont know if that helps, wait actually im sure it doesnt so nevermind what ive write above :)
now honestly, you should wait till they get all the details fixed and maybe for a better price if you can wait IMHO

-
Well I now have 3 of them. Two Stainless and one BO.
My impressions are as follows...
- For some reason, the boxed two do not seem to be as stiff as the blister pack one. The one is so stiff, it isn't a pleasure to use.
- Not as comfortable to use as the older Core. My reasoning is due to the locking levers and the shape of the handles. The two levers are badly placed for me as it is located exactly where I use a finger to open the plier handles for use. The core, the levers do not stick out as much, nore do they seem to have so many sharp corners. I dislike the 300s spring loaded locking lever in both shape and how much they stick out from the handle.
- The Super Tool 300 should be a tougher tool as they eliminated that Zytel linner that is found in the core. However, that liner does make deploying the pliers and the tools somewhat smoother then the all metal 300.
- The plier head does have the removable cutters on the 300, but, unlike Gerber, do not supply the Allen key. Bo, hiss. On top of that, nobody can accuse the new head to be elegant. In fact, the few models I do have seem to have casting artifacts still visible, where they didn't quite grind enough off. Nothing major, but still there unlike the older heads that appeared to be flawless.
- I am not a big fan of the new clumping system in so much as the main sharp blades have a round indentation that mates with a round protrusion in the handle. On one of the 300s, the main blade is rather difficult to take out and put back in. Mind you, this will get easier with use, but the experience is rather disconcerting from a quality standpoint.
- They made the 300 easier to use with gloves on. Very commendable. However, I found that the large rectangular cutouts in the handle to accommodate gloves becomes a very uncomfortable tool to hold when you have one of the sharp blades out for use. This causes a major unevenness between the two handles resulting in the wider handle to dig uncomfortably into the finger. This only happens if you have to use a folding tool and keep the pliers open for quick use.
My opinion, based upon the above is that the 300 is a nice tool that could have been made better. There appears to be some quality issues at the moment. To the market segment that this tool is geared towards (construction/Industrial/etc…), the negatives I stated may not be that much of a factor seeing that the 300 has a tougher more durable build compared to the Core with its plastic liner. The locking mechanism on the 300 has also been beefed up compared to the Core. Overall, the 300 is a very capable and tough tool with some quality control issues, and questionable ergonomic decisions. Is it the right tool for you…only you can answer that.
-
Thanks Chako

-
Thanks for sharing, Chako..

-
@Chako said:
My opinion, based upon the above is that the 300 is a nice tool that could have been made better. **There appears to be some quality issues at the moment. **To the market segment that this tool is geared towards (construction/Industrial/etc…), the negatives I stated may not be that much of a factor seeing that the 300 has a tougher more durable build compared to the Core with its plastic liner. The locking mechanism on the 300 has also been beefed up compared to the Core. Overall, the 300 is a very capable and tough tool with some quality control issues, and questionable ergonomic decisions. Is it the right tool for you…only you can answer that.Cheers for that Chako. What do you consider to be the Quality control issues - or did I miss it?
-
In fact, the few models I do have seem to have casting artifacts still visible, where they didn't quite grind enough off. Nothing major, but still there unlike the older heads that appeared to be flawless.
5. I am not a big fan of the new clumping system in so much as the main sharp blades have a round indentation that mates with a round protrusion in the handle. On one of the 300s, the main blade is rather difficult to take out and put back in. Mind you, this will get easier with use, but the experience is rather disconcerting from a quality standpointI agree with this part Chako. Sounds just like my 300 plier head. Quality no where near as nice as on other LM tools. I don't really like the new clumping system either.
-
In fact, the few models I do have seem to have casting artifacts still visible, where they didn't quite grind enough off. Nothing major, but still there unlike the older heads that appeared to be flawless.
- I am not a big fan of the new clumping system in so much as the main sharp blades have a round indentation that mates with a round protrusion in the handle. On one of the 300s, the main blade is rather difficult to take out and put back in. Mind you, this will get easier with use, but the experience is rather disconcerting from a quality standpoint
I agree with this part Chako. Sounds just like my 300 plier head. Quality no where near as nice as on other LM tools. I don't really like the new clumping system either.
Ah - that answers my question - totally missed it - thanks!
-
In fact, the few models I do have seem to have casting artifacts still visible, where they didn't quite grind enough off. Nothing major, but still there unlike the older heads that appeared to be flawless.
- I am not a big fan of the new clumping system in so much as the main sharp blades have a round indentation that mates with a round protrusion in the handle. On one of the 300s, the main blade is rather difficult to take out and put back in. Mind you, this will get easier with use, but the experience is rather disconcerting from a quality standpoint
I agree with this part Chako. Sounds just like my 300 plier head. Quality no where near as nice as on other LM tools. I don't really like the new clumping system either.
Ah - that answers my question - totally missed it - thanks!
Any chance for a close-up picture of the problem..? ???
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login