ST 300 owners club
-
In fact, the few models I do have seem to have casting artifacts still visible, where they didn't quite grind enough off. Nothing major, but still there unlike the older heads that appeared to be flawless.
- I am not a big fan of the new clumping system in so much as the main sharp blades have a round indentation that mates with a round protrusion in the handle. On one of the 300s, the main blade is rather difficult to take out and put back in. Mind you, this will get easier with use, but the experience is rather disconcerting from a quality standpoint
I agree with this part Chako. Sounds just like my 300 plier head. Quality no where near as nice as on other LM tools. I don't really like the new clumping system either.
Ah - that answers my question - totally missed it - thanks!
-
In fact, the few models I do have seem to have casting artifacts still visible, where they didn't quite grind enough off. Nothing major, but still there unlike the older heads that appeared to be flawless.
- I am not a big fan of the new clumping system in so much as the main sharp blades have a round indentation that mates with a round protrusion in the handle. On one of the 300s, the main blade is rather difficult to take out and put back in. Mind you, this will get easier with use, but the experience is rather disconcerting from a quality standpoint
I agree with this part Chako. Sounds just like my 300 plier head. Quality no where near as nice as on other LM tools. I don't really like the new clumping system either.
Ah - that answers my question - totally missed it - thanks!
Any chance for a close-up picture of the problem..? ???
-
Here they are:
- Plier head has artifacts on them. In one case, they didn't grind enough away, so you get this slight plateau on one side that is visible. Nothing major, but it is there. On another tool, some grinding marks are present.
- One tool was so difficult to open and close, it wasn't a pleasant experience. In fact, it made the tool feel cheaper then it ought to from a first impression viewpoint.
- On two of the tools, there feels like some grinding on the pivots when some of the folding tools are deployed. Not silky smooth. It is as if there is dust down there.
- On one of the 300s, the two main blades with the round anti-clumping mechanism were very difficult to deploy and close.
- One of the 300s had very stiff folding tools, meaning they were nail breakers.
I know much of this will loosen up with time, but with 3 models, I have noted some interesting inconsistencies between them. This leads me to believe that these tools are a sort of hit and miss affair. With that said, it is a nice tool, and I know the market it is geared towards probably won't have an issue with some of the above items. Don't get me wrong, I like the 300. However, when you compare several of them, you notice the little things that add up.
-
Cheers for that. Mine will be arriving any day now (I hope) - so it'll be interesting to see if it has any or all of the above problems.
I seem to recall that there were a few issues like that with the Skeletool when they launched it, which is inexcusable really given the cost of the things. Having said that, I've never had any such issues with the tools I've had through my hands, so I might just be lucky!
-
Here you go AHB.

-
-
You wait till you see the marks on mine when I've had it a week or two :D
I see your point, but that stuff never really bothers me on any tool, unless it affects it's performance. I know it does with some people, which is cool, but not me.
The gritty problem is the one I don't like the sound of, but I've got maintenance tools to strip it down if needs be :D
Actually, a question Chako - are the screws the same size as the Core?
-
ill cross my fingers now then....but im ready to take those details

-
That is a quality control issue albeit cosmetic in nature. As for the screws, not sure. I imagine they are the same except the two closest to the pliers being shorter in lenght.
-
@Chako said:
That is a quality control issue albeit cosmetic in nature. As for the screws, not sure. I imagine they are the same except the two closest to the pliers being shorter in lenght.I meant, are the screw heads (diameter) the same as the Core? As in, will the tools I have fit them to take it apart, if you see what I mean.
-
They look the same.
-
Cool - thanks

Looks like I'll be taking it to bits then. In the name of science, obviously. It's not like I get a kick out of taking things apart or anything :D
-
Nice clear shots Chako, you are right about the pliers being a cosmetic issue. The difficulty opening the tools is something to be concerned about , that video of Junior on Utube using the instructions too work out how too close the tool, sounds like a couple ST300's are overly stiff to use
. -
I hope to get a st 300 sometime. So far I am happy with what I have now.

-
@MultiMat said:
Nice clear shots Chako, you are right about the pliers being a cosmetic issue. The difficulty opening the tools is something to be concerned about , that video of Junior on Utube using the instructions too work out how too close the tool, sounds like a couple ST300's are overly stiff to use
.Getting the knife blades out was the real downer for me. Too much pressure to get them out and I felt like I was going to cut myself everytime. I much prefer the core.
-
Nice clear shots Chako, you are right about the pliers being a cosmetic issue. The difficulty opening the tools is something to be concerned about , that video of Junior on Utube using the instructions too work out how too close the tool, sounds like a couple ST300's are overly stiff to use
.Getting the knife blades out was the real downer for me. Too much pressure to get them out and I felt like I was going to cut myself everytime. I much prefer the core.
Really, the core is better than the st300?, im glad your sending me one :D
-
Well I got mine, and besides the cosmetic "grinding" marks on the pliers it suffers from none of the above, so that's cool.
Actually the grind marks are cool, as they are consistent on each side, and look almost like a grain.
Full feedback & thoughts later, but so far, this is EXACTLY what I was hoping the ST300 would be. My Core will be retiring now as a worthy successor has been found!
I'm off to the woods later and may well cut some stuff up :D
-
cool
but if i may ask why the ALX and not the AL? :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
