PST maintenance tools
-
@jim guy said:
I dont know, but I want one of those tools too, some of mine need tightend up

Hey Jim :) It seems to me that maybe the right size spline socket would do the trick.
Of course, then you'd need to know the number of grooves on the screw head ( Where's my magnifying glass?)
Oh, and the size of the screw ( Where'd I put my calipers....)
GMBif you find out the size and where to get one that fits a pst let me know

-
Welcome to the forum Greenman. :)
I'm sure one of our Leatherman experts (well the best we have anyway ;)) will be along in a sec and give you an answer.
-
The Kick clip is a reasonable fit on the knurled heads and can be used as a spanner (you'll need two of them to take the bolt out). Some people use vice grips to do the same job but there is usually minor damage to the heads if you do it that way.
Benner's put a clip on a PST, take a look at this:
My first mod.
This morning I was lucky enough to receive a new plier head for my PST courtesy of our good friend Kwakster (many thanks buddy). The head needed replacing a...
Multitool.Org Forum (multitool.ninja)
Welcome to the forum by the way :tu:
-
Welcome to the forum.

Like Craig said above, I have done the same thing in that thread.

-
Yup, it's all been said.
The knurled screws are proprietary, so you're unlikely to find a set to buy. A few of us have been lucky enough to get our hands on maintenance tools, but it probably isn't worth sending your PST across the Atlantic, as you'd probably prefer to do the mod yourself, and of course, two Kick pocket clips make perfectly good spanners anyway!
Hope it all turns out the way you want

-
@Craig said:
Benner's put a clip on a PST, take a look at this:
/topic/7116I still like those pics, Benner...

Oh, and welcome Greenmanbacchus...

(Another Type O Negative Fan..?)
:D -
@DaveK said:
Yup, it's all been said.The knurled screws are proprietary, so you're unlikely to find a set to buy. A few of us have been lucky enough to get our hands on maintenance tools, but it probably isn't worth sending your PST across the Atlantic, as you'd probably prefer to do the mod yourself, and of course, two Kick pocket clips make perfectly good spanners anyway!
Hope it all turns out the way you want
Thanks Dave :) I just had a good laugh at myself..." Proprietary?
Proprietary? Why, that Leatherman guy, he's...he's.....oh...um...brilliant, now that I think of it..." ;)GMB
-
@jim guy said:
@jim guy said:
I dont know, but I want one of those tools too, some of mine need tightend up

Hey Jim :) It seems to me that maybe the right size spline socket would do the trick.
Of course, then you'd need to know the number of grooves on the screw head ( Where's my magnifying glass?)
Oh, and the size of the screw ( Where'd I put my calipers....)
GMBif you find out the size and where to get one that fits a pst let me know

Will do, Jim....first I gotta find the calipers and the magnifying glass LOL :)
GMB -
@Craig said:
The Kick clip is a reasonable fit on the knurled heads and can be used as a spanner (you'll need two of them to take the bolt out). Some people use vice grips to do the same job but there is usually minor damage to the heads if you do it that way.Benner's put a clip on a PST, take a look at this:
My first mod.
This morning I was lucky enough to receive a new plier head for my PST courtesy of our good friend Kwakster (many thanks buddy). The head needed replacing a...
Multitool.Org Forum (multitool.ninja)
Welcome to the forum by the way :tu:
Thanks for the welcome, Craig...and the link....now I know it can be done ;)
GMB -
I used two kick clips to remove the screws (add a little heat before hand) and then dremeled out the portion of the handle for the anti roation tab. Then threaded the kick clip into the knurled screw and viola instant pocket clip. add a touch of superglue to the back of the clip and a touch of blue loctite to the screw and you will be in business. I have done about 6 of these so far and all have held up nicely.
-
Benner's put a clip on a PST, take a look at this:
/topic/7116I still like those pics, Benner...

Oh, and welcome Greenmanbacchus...

(Another Type O Negative Fan..?)
:DThanks for the welcome and the Link, AHB :) Those pics are great aren't they? Oh, and while I have indeed been known to listen to Type O Negative, I'm afraid I've rather lost touch with them since 'Bloody Kisses', which, now that I think of it was quite some few years ago at this point. I've been likened to both the Greenman and Bacchus ( Roman god of wine, women, and general frolicking)for a good many years before that, hence the nick. In fact, my woman calls me Dino, as short for Dionysius, the Greek equivalent of Bacchus.
( None of which, I fear has much to do with multitools LOL) Thanks for your help :)
GMB -
@RaptorMan said:
I used two kick clips to remove the screws (add a little heat before hand) and then dremeled out the portion of the handle for the anti roation tab. Then threaded the kick clip into the knurled screw and viola instant pocket clip. add a touch of superglue to the back of the clip and a touch of blue loctite to the screw and you will be in business. I have done about 6 of these so far and all have held up nicely.Thanks, Raptorman :) Your nick (if I may ask) Are you involved with hunting hawks? I've had my share of kestrels and various buzzards in the past...great fun, if a lot of work ;) Looking at Benner's work, I see that he has removed the anti-rotation tab entirely with apparent good results. That route seems to be less work, plus it involves modifying the clip only rather than the MT itself. Dunno how precise I'd be with a dremel with such small work. Nevertheless, I'm very appreciative of your idea...duly noted and logged ;) Thanks! :)
GMB -
No hunting hawks but plenty of ducks and geese. The name comes from when I was on an ATV forum and I ride a Yamaha Raptor 660.
I liked Benners idea I just like having the tab in place to eliminate the rotation which could occur. It was fairly easy to dremel just be sure you want it in the location when you start. Here is a pic of my camo PST II with kick clip mod.

-
here is a full view of it

-
it is exactly one year from benners mod.
-
Welcome aboard mate

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login