Swiss Explorer Mod Question
-
Greetings All- this is my first post although I have enjoyed reading comments for a while. I've got multiple SAKs and like many, continue my quest for the 'ideal' model. Here's what I'd like it to look like (it's a 4 layer model) and I'm trying to find someone that can do it (since I'm not that handy, not do I have the tools at home):
-
Main blade/ sheepsfoot (perhaps from the electrician) -
Scissor -
Magnifier/ Phillips -
Combo tool / shortened metal saw (i'm figuring this can be ground down from a full-size)
This makes a 4 layer model (and perhaps a screwdriver on the back spring side in place of the hook)
What do you guys think? Doable?
Thanks,
Steve -
-
Welcome to the forum mate

I'll move this to the mod forum, where hopefully it'll get more answers :)
-
The main problem is whether the saw will work on the combo tool backspring. I really don't think such a short saw would be of much use anyway though...

I think you'll likely have to chose between:
- Just a regular saw layer and no combo tool or openers
- Both regular saw and opener layers
- Just a regular opener layer and no saw
I think you would at least want a flathead, so you will need the openers. That just leaves the question of whether to add a saw.
Unless there is something else you could put opposite the combo tool?
-
Welcome to the forum Steve.
Max6166 has covered it pretty well. The main issue would be trying to find a backspring that would accommodate your Combo tool and short saw/file. There aren't that many double ended springs: blade layer, Phillips/mag (and that certainly wouldn't work, much to thick), can opener/cap lifter. If we could find one that will hold the tools at the right height (so as you can get to them) we would also have to take into account that the metal saw and the combo tool are different thicknesses, some kind of spacer would have to go in somewhere I suspect.
As Neil likes to say; anything's possible with enough grinding. This one however is outside my workshop's capabilities ATM. :-\
Far simpler options would be to either:
A) drop the electricians blade and put the combo there (where it's intended to be) and have a full sized metal saw/file. Would still be a four layer SAK.
B) Just add the metal saw/file to a standard Explorer. While this would make a five layer SAK keep in mind that the saw is a pretty thin tool and wouldn't be adding much to the overall thickness.
Best of luck.
-
I must have been very tired last night. I thought you wanted to add a wood saw, not the metal file/saw. :-[
Anyway, Gareth is giving great advice. The metal file is a very thin layer.
You could also reprofile the main blade into a sheepsfoot. Others have done it. Personally, I am not a big fan of it though.
I guess you could also look at it as a Modeler with the opener layer removed, and the small blade swapped for the combo tool.
That would be a very cool configuration.

-
Thank you guys! I actually had some help from scibeer in making just that 5 layer model you described. The 5th layer makes it a little big, but it is a really great tool... I may just need to live with it (not such a bad thing)... I look forward to talking with you guys in the future!
-
Scibeer's the man.

If you can live with just the inline phillips on the can opener, you could drop the entire magnifier/phillips layer and carry a little keychain magnifier instead. You can even carry the actual Vic magnifier if you want.
That's what I do now after carrying an Explorer for a while.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login