Classify each maker
-
Swiss = polished but more for looks that work
:ahhh
-
Leatherman is the most common.
Gerber has the most models.
Victorinox has the most functions.
SOG has the most versatility.
I certainly would challenge any claim that the SwissTools are more for looks than work, and I doubt anyone here would be able to come up with a suitable argument to convince me of that. Just about all of the main offerings from these four are tough, although there are some models that are tougher than others, and some of the smaller/cheaper models from Gerber don't have as good a reputation, but even around here they aren't seen as bad by all.
Def
-
Swisstools are pretty tough I would have to say. Dont let the good looks fool you. Leatherman tools are great, functional tools. Yeah, the fit and finish is not as refined as the swisstools but they are still of very good quality. Gerber tools are not as great as the previously mentioned tools. Dont get me wrong they still make a great tool that is functional and innovative. The SOG tools are real workhorses. They are not as flashy and sophistocated as the swisstool or leatherman but they are exceptionally tough and offer no frills performance.
-
I can't think of any tools that are on the same level of precision craftsmanship as the Swiss are. Wenger may not be as tight (crafted, not hard to open) as Victorinox, but they are close, and there's no shame in coming in second to them!
Def
-
Thanks good info the reason I ask is cause I am needing a 2nd tool (I already have the Wave) it always seams like I need a 2nd tool to hold what ever I am working on so I can do what ever to it (did that make sense) but I am not sure what other tool I should get. It seams like a safe bet to get the Victorinox Swisstool Spirit Plus Multi-Tool. But I am worried that every time I pull out the tool all the stuff is going to fall out.
-
You always need two tools, be it a couple of multis or a multi and a SAK etc. You need one tool to hold the bolt while you use the other to turn the screw. Leatherman's original design was to compliment a SAK, not replace it.
The Plus stuff in the Spirit plus is packed in pretty good, in separate pockets in the same sheath so I think you are pretty safe there.
Def
-
I'll take a stab at this, and do my best to keep it short :D
Leatherman- Good tools, good variety of design
Vic- Tough, great Fit & Finish (maybe at the expence of function sometimes :-X)
Gerber- Lots of models, less expensive way to get a "real" MT
SOG- *Just * tools (which is a compliment), customizable -
thats what i was trying to say about the vic
"Vic- Tough, great Fit & Finish (maybe at the expence of function sometimes )"
thats what i think i am going to get next. i just have to find a way for my woman not to find out i got a 2nd MT.
This is a realy great forum by the way not once have i seen the " USE THE SEARCH BUTTON " Post
-
We have a Search button? ???
What does it do? :P
Def
-
Victorinox #1 ever.... Good price , very well made , Great History !
Leatherman #2 very good tools for the money , but I can live without.
Gerber #3 Good tools for the money. Many models, good looking.
SOG #4 I said that I don't own one but I was wrong.
I have a CROSSGRIP but never used because it is small . But maybe a full size
Sog tool should be good...so ...I can't tell...That's just an rough idea

-
I own a Wave, a PowerLock, an MP600, and a Swisstool, and I can honestly say that the Gerber is best for a cheap tool, and in most cases, fast opening pliers. They are also very unique. I'd choose a Leatherman if I needed both a serrated and a straight edge blade that I could get to quickly (this doesn't apply to the Blast, Core, etc.). I'd choose a SOG if I needed heavy duty pliers, or if I needed a specific range of tools in it. The Swisstool I would pick if I knew I would need to get to any of my tools quickly, and/or if I knew my tool would be under extreme conditions.
-
@cortiz1679 said:
If you could classify each of the major 4 multi tool makers how would it go?
From what I have read this is what I am guessing
Leatherman most well rounded
Swiss = polished but more for looks that work
SOG & Gerber = tough like a truckBut I am new here so can some1 help me get it straight.
Welcome cortiz1679. Here are my opinions on each of the big four:
-Leatherman still makes a few reasonably-priced, basic, plain-jane models, such as the Kick. At one time the Leatherman multis were all about function first, with style a distant second. Nowdays many of the more expensive Leatherman models do feature style - for example, titanium scales that contribute nothing in the way of functionality or weight reduction.
-Gerber has followed a similar path. Nowdays Gerber offers a rapidly changing lineup of multitools, many of which seem to me to emphasize style over functionality. However, Gerber still makes the rugged, reliable, retractable-plier series of MP400, MP600, and Diesel models. These retractable-plier models have been around for a while and they've been gradually improved over the years. IMHO, they are hard to beat as the 'best bang for your buck' multis.
-SOG multis have a reputation for ruggedness and reliability, and seem to me to be pretty darned good in the fit and finish department. (I've examined SOG multis, but don't own one.) SOG multis also have the advantage of being easily disassembled and user customizable. And, last but not least, most models offer SOG's trademark compound leverage pliers.
-The Victorinox SwissTool and Spirit have a lot of fans on MTO. Both have amazing fit and finish, and they are supposedly very corrosion resistant and quite durable. (I've examined both Vic models in a store, but don't own either.) Once you've handled these Vic tools, it's hard to resist buying them. Eventually, I'll probably break down and buy a Spirit, even though I don't really care for its sole knife blade: a fully-serrated blade that some wag has dubbed "the peanut butter spreader."
Hope this helps.
.
-
The spirit with the sole blade is half serrated mate :)
Not a good picture I know but if you look where the saw sorta meet's the blade you'll see how the serration's stop half way.

-
@micky d said:
The spirit with the sole blade is half serrated mate :)Not a good picture I know but if you look where the saw sorta meet's the blade you'll see how the serration's stop half way.
Ooops! Thanks for the correction, micky d.
I forgot that Vic partially-serrates their blades on the front half, rather than on the back half like most everyone else.
.
-
@micky d said:
The spirit with the sole blade is half serrated mate :)
Not a good picture I know but if you look where the saw sorta meet's the blade you'll see how the serration's stop half way.
Ooops! Thanks for the correction, micky d.
I forgot that Vic partially-serrates their blades on the front half, rather than on the back half like most everyone else.
.
No problem mate, Its not often that I can be useful ;D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login