What Did You Use Your Multitool For Today?
-
Beam aperture: 2.8mm (dia)
Wavelength: 670nm
Power supply: 5Vdc
Operating current: <40mA
Output power: 0.7 - 0.99mWAt least that's what the spec says, I think its under performing the beam is definitely diffusing more than it should, I'll hopefully finish it this week an post a few pics of it in use
-
What's the output?
Beam aperture: 2.8mm (dia)
Wavelength: 670nm
Power supply: 5Vdc
Operating current: <40mA
Output power: 0.7 - 0.99mWAt least that's what the spec says, I think its under performing the beam is definitely diffusing more than it should, I'll hopefully finish it this week an post a few pics of it in use
Please do
<u>Everyone</u> likes lasers :D -
Been carrying the LM Supertool 200 the last couple days,try to alternate about once a week,today used the saw on some branch's,crosspoint to change some bulbs,the pliers to straiten out some weather stripping,the knife to open some letters, and the awl to start some screws,all the tools worked great.
& 
-
Juice CS4 today.
Some electrical work in the attic and then used to prepare lunch. Versatility with blue scales.
-
Used my Recaro Sideclip (TM) to mount shelfs in a closet.. :)
-
Addendum to yesterday's useage:
I used the driver on the file of my Alox Vic Classic to spin some Phillips head screws while adjusting throttle cables. Tight space there, and no other Phillips driver would do in the space.

-
Used the end of the file on an old Esquire to get the crud out of the threads of the coupling nuts on a radiator.
What an exciting life I lead ::)
-
Used my Spirit to partially dissemble my 30+ year old Masport mower & get it running :D :D :D :D.
Had help from the mad tool Dennis sent me the 'Spark Doctor' for spark plug removal & cleaning duties.
Feeling very sore though , pull cord start + cranky old mower=sore flippen arms (happy I got her running though :D) -
-
@Mr. Whippy said:
Used the end of the file on an old Esquire to get the crud out of the threads of the coupling nuts on a radiator.
What an exciting life I lead ::)
If that coupling joint isn't tight, it'll get pretty exciting, pretty quickly. :ahhh
When the water was back on I was pleased to see the joints to the radiator were good. Problem was the return valve decided it had had enough of life when I opened it up

Though I suppose it did allow me to make use of my big King Dick adjustable spanner

-
@Mr. Whippy said:
Used the end of the file on an old Esquire to get the crud out of the threads of the coupling nuts on a radiator.
What an exciting life I lead ::)
If that coupling joint isn't tight, it'll get pretty exciting, pretty quickly. :ahhh
Though I suppose it did allow me to make use of my big King Dick adjustable spanner

I REALLY hope that's not a euphemism :ahhh
-
@Flash (some know him as WAR) said:
@Mr. Whippy said:
Used the end of the file on an old Esquire to get the crud out of the threads of the coupling nuts on a radiator.
What an exciting life I lead ::)
If that coupling joint isn't tight, it'll get pretty exciting, pretty quickly. :ahhh
Though I suppose it did allow me to make use of my big King Dick adjustable spanner

I REALLY hope that's not a euphemism :ahhh
Nope. Tools for a dull afternoon :-\

-
I happen to have a King Dick myself. :D
Came with the tool kit in my Land Rover (Right Hand Drive--btw)
-
I've got some King Dick Spanners somewhere
Do they still make them ?Dunc
-
@Mr. Whippy said:
I happen to have a King Dick myself. :DCame with the tool kit in my Land Rover (Right Hand Drive--btw)
I might have a smaller one* somewhere as well but what's the fun in that ;)
** That's not a public admission OK :D*
@Dunc said:
I've got some King Dick Spanners somewhere
Do they still make them ?Dunc
Not that I'm aware. That one was 50p at a carboot sale a while back. Proper bargain :)
-
I like them.
Sort of halfway between a Crescent adjustable wrench and a pipe wrench (Monkey wrench).
-
@Mr. Whippy said:
I happen to have a King Dick myself. :DCame with the tool kit in my Land Rover (Right Hand Drive--btw)
HHHmmm
Would that possibly make them UK manufacture then ?Dunc
-
@Mr. Whippy said:
I happen to have a King Dick myself. :D
Came with the tool kit in my Land Rover (Right Hand Drive--btw)
HHHmmm
Would that possibly make them UK manufacture then ?Dunc
Mine was. In 1967. Originally delivered to a dealer in St. Albans. Not sure how it arrived in the US though...

British plates: LGV 721F Maryland plates: LGV 721F
:D
-
@Mr. Whippy said:
@Mr. Whippy said:
I happen to have a King Dick myself. :D
Came with the tool kit in my Land Rover (Right Hand Drive--btw)
HHHmmm
Would that possibly make them UK manufacture then ?Dunc
Mine was. In 1967. Originally delivered to a dealer in St. Albans. Not sure how it arrived in the US though...

British plates: LGV 721F Maryland plates: LGV 721F
:D
Cool :D Very little chance of it ever seeing home again :D
-
crunch helped me replace a broken valve


10/10

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login