Multitool Tools
-
Hello
Following on from the Multitol Timeline i am thinking of putting together a "database" of what tools each multitool contains. It may take a while and i may not even progress much with it, but i was hoping people could add to this list of tools/features found on multi's.
Here's what i've got so far.
Plain Edge
Serrarted Edge
Combo Edge
Pliers
Sprung Loaded
Flickout Pliers
Locking Pliers
Cutters
Hard Wire Cutter
File
Metal Saw
Wood Saw
Saw Coupler
Large Bit Driver
Small Bit Driver
2mm Flat
3mm Flat
4mm Flat
5mm Flat
6mm Flat
7.5mm Flat
Philips
Hex Socket (Crunch)
Bottle Opener
Can Opener
Crate Opener
Punch Down Tool (As on paladin tools)
Wire Stipper (like on the new waves can opener)
Lanyard Ring
Scissors
Replaceable Carbide Cutters
Crimper
Awl
CorkscrewI've probably missed some really obvious ones out!
Thanks Roadie -
Another great idea :)
lifted guiltily from sosak :-[
Divot Tool
Fish Scaler:
Hoof Cleaner
Hook
Hook Disgorger:
Line Guide: fishing tool
Marlin Spike
Nail Clipper
Nail File:
Pharmacy Spoon
Shackle Opener
Spike Wrench
Stroke Counter
USB Memory (MB):
Watch Opener
Whistle
Window Breaker
Blade: Locking
Blade: One-handed Opening
Blade: any
- Belt Cutter
- Electrician
- Grafting
- Large Clip-Point
- Large Gutting
- Large Sheepsfoot
- Large Spearpoint
- Orange Peeler
- Partially-Serrated Clip-Point
- Partially-Serrated Spearpoint
- Pruning
- Rounded
- Serrated Spearpoint
- Small Clip-Point
- Small Gutting
- Small Hook/Scraper
- Small Sheepsfoot
- Small Spearpoint
- Small Wharncliffe
Phillips: any
- #0 (fine):
- #1 (small):
- #2 (medium):
- #3 (large): bit
Pozidrive: any
- #0 (small): bit
- #1 (medium): bit
Screwdriver: any
- 1.5 mm (mini):
- 2 mm (fine):
- 3 mm (small):
- 3x1: bit
- 4 mm (medium):
- 4x1: bit
- 5 mm (medium):
- 6 mm (large):
- 7.5 mm (large)
Bit Holder: any 1/4" (10+1): external 1/4" (6): internal 4mm (3+1 double-ended): internal 4mm 2x (3+1 double-ended): internal
Bit Wrench: any 1/4" ratchet: external 1/4" wrench: external 1/4" wrench: internal 4mm: internal
Hex: any
- 1.2 mm: bit
- 1.5 mm: bit
- 2.5 mm: bit
- 2 mm: bit
- 3 mm: bit
- 4 mm: bit
- 4 mm Socket
- 5 mm Socket
Torx: any
- 10: bit
- 15: bit
- 6: bit
- 8: bit
Chisel
Crate Opener
Disc Saw: removable
Metal File:
Metal Saw:
Pliers:
Reamer:
Universal Wrench
Wire Cutter
Wirestripper:
Wood Saw
Bottle Opener: a
Can Opener:
Corkscrew:
Light:
Lighter
Magnifying Glass:
Pen:
Pin
Scissors
Stylus
Toothpick
Tweezers
Blade: Locking
Blade: One-handed Opening
Blade: any
- Belt Cutter
- Electrician
- Grafting
- Large Clip-Point
- Large Gutting
- Large Sheepsfoot
- Large Spearpoint
- Orange Peeler
- Partially-Serrated Clip-Point
- Partially-Serrated Spearpoint
- Pruning
- Rounded
- Serrated Spearpoint
- Small Clip-Point
- Small Gutting
- Small Hook/Scraper
- Small Sheepsfoot
- Small Spearpoint
- Small Wharncliffe
Phillips: any
- #0 (fine):
- #1 (small):
- #2 (medium):
- #3 (large): bit
Pozidrive: any
- #0 (small): bit
- #1 (medium): bit
Screwdriver: any
- 1.5 mm (mini):
- 2 mm (fine):
- 3 mm (small):
- 3x1: bit
- 4 mm (medium):
- 4x1: bit
- 5 mm (medium):
- 6 mm (large):
- 7.5 mm (large)
Bit Holder:
Bit Wrench:
Hex: any
- 1.2 mm: bit
- 1.5 mm: bit
- 2.5 mm: bit
- 2 mm: bit
- 3 mm: bit
- 4 mm: bit
- 4 mm Socket
- 5 mm Socket
Torx: any
- 10: bit
- 15: bit
- 6: bit
- 8: bit
Chisel
Crate Opener
Disc Saw:
Metal File:
Metal Saw:
Pliers:
Reamer:
Universal Wrench
Wire Cutter
Wirestripper:
Wood Saw
Blade: Locking
Blade: One-handed Opening
Blade: any
- Belt Cutter
- Electrician
- Grafting
- Large Clip-Point
- Large Gutting
- Large Sheepsfoot
- Large Spearpoint
- Orange Peeler
- Partially-Serrated Clip-Point
- Partially-Serrated Spearpoint
- Pruning
- Rounded
- Serrated Spearpoint
- Small Clip-Point
- Small Gutting
- Small Hook/Scraper
- Small Sheepsfoot
- Small Spearpoint
- Small Wharncliffe -
If someone want's me to trim down the above list :-[ let me know :)
-
ok after a bit of work i think i've got a layout i'm happy with. The only thing i would like is if some one could measure the width of the leatherman small and medium flat screwdrivers that would be appreciated (don't have access to any tools with them on)
Anyone got any ideas about this, does it seem like a good idea etc...?
Pic to show what i've done so far.

-
Looks like a very good idea to me mate :)
-
@Roadie said:
ok after a bit of work i think i've got a layout i'm happy with. The only thing i would like is if some one could measure the width of the leatherman small and medium flat screwdrivers that would be appreciated (don't have access to any tools with them on)Anyone got any ideas about this, does it seem like a good idea etc...?
Nice work there Roadie!
Here's a few measurements on Leatherman flatheads:
PST...2,5,7mm
PSTII...2,5,7mm
SuperTool...2,5,7mm
SuperTool 200...2,5,7mm
Mini...5.5mm
Old Wave...2,3,5,7mm :P
Blast...3,7mm
Fuse...3,5mm
SideClip...3,5,7mm
Core...3,5,8mm
Juices...2,3,6mm -
Thanks a lot!
-
Here are a few more multi-tools (I used the row numbers from your worksheet):
Kershaw A100C/A100L:
4,5,8,9,11,12,20,24,26,27BuckTool 360, 360BK, 360CM
3,4,5,9,17,19(closer to 3.5mm),21,24(#1 & #2),26,27BuckTool 360FL
4,5,9,11,17,19(closer to 3.5mm),21,24(#1 & #2),26,27,30BuckTool 360WM
3,5,9,11,17,19(closer to 3.5mm),21,24(#1 & #2),30,35BuckTool 360 Harley Davidson
4,5,9,11,17,19(closer to 3.5mm),21,24(#1),26,27,30,35SOG S42 (typical configuration)
4,5,9,11,12,17,20,23,24(#1),26,27,31,35SOG S60 (old version with scissors)
4,5,9,11,12,13,17,20,22,24(#1),26,27,31,32,35 and adapterYou might break #23 (Phillips) into #1 Phillips and #2 Phillips. Some tools have a #1/#2 Phillips driver and some tools only have a #1 Phillips.
-
Cheers, that makes life nice and easy. Best get to work on it!
-
Well i've bashed a few more tools in, if any one can see any glaring errors please draw them to my attention, if people want i can make the file available to download. Any advice on how to better lay it out/make it easier to use please shout up!
And here's a pic of what i have so far
-
I like that a lot! Nice work :)
-
Yes indeed, a good project. I will try to get more info for you as time allows.
-
Thanks for all the help!
Here is a link to the Excel version should anyone want a copy (and if they feel like editing it feel free! then email it back to me and i'll upload the edited version......unless there's a way to do it on the wiki page that is?)
[LINK](http://www.highfield90.freeserve.co.uk/Tool/Tools Database Colour.xls)
Roadie
Edited to get the link right!
-
There should be a way to put it on the Wiki- in fact, this was one of the reasons we launched the Wiki now.
Of course I have no idea how to do it, but I'm certain it can be done... I'll play around and see if I can figure it out if no one else comes up with anything.
Def
-
@Defender said:
There should be a way to put it on the Wiki- in fact, this was one of the reasons we launched the Wiki now.Of course I have no idea how to do it, but I'm certain it can be done... I'll play around and see if I can figure it out if no one else comes up with anything.
Def
I'm sure there'll be a way to do it! Trouble is i can't just take a screen shot of it anymore as it's wider than my screen! (i could take multiple screen shots but that takes effort!)
-
Hmmm...putting it on the Wiki would be ideal, but I haven't seen a way to make Excel-style layouts yet. I'll look into it as well and let you know.
-
No it doesn't look like you can get excel proper on wiki, the closest i've found is basically just a table layout, which loses a lot of the formating. I tried exporting the excel file as a html file but it doesn't support the vertical text which means a very very wide document that isnt easy to compare multitools with.
-
@Roadie said:
No it doesn't look like you can get excel proper on wiki, the closest i've found is basically just a table layout, which loses a lot of the formating. I tried exporting the excel file as a html file but it doesn't support the vertical text which means a very very wide document that isnt easy to compare multitools with.That's what I was thinking, but I was too lazy to type it all! :P
PS - I'm working on a another option.
-
Hey Roadie, could you send me the Excel file please? (I wanna try something)
Email = zigzagjm@aol.com
Thanks!
Bob -
Email sent, good luck with it!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login