Modders help needed.
-
They should both be pretty easy to do.
Are you sure you don't want to just give the 1st layer removal mod a try yourself? It could be fun.

Just scrounge a combo tool from someone and you are good to go. I think there is a detailed step-by-step layer removal guide somewhere.
Honestly, it is pretty easy and a lot of fun.
At the very least, you should give the disassembly a try if you are at all interested in how SAKs work. You will never see SAKs in the same way again.

-
You could always give Bill (Scibeer) a shout. Haven't heard from him in a while though.
-
-
I would do it, but I don't have the tools.
-
You don't need many tools. You could probably do it with just a hammer, a hacksaw and a nail if you really wanted to.
You just pop off the scales, remove the bushings, take out the layers your don't want, and smack the pins back down. Simple! :D
The most common tools used are a drill, a punch, and a ball peen hammer. A small bench vise would be handy too.
I got the hammer and a set of nail punches at a large dollar store for about $10 total.
The vise is mainly used to just keep the SAK in place while drilling out the pin heads. I got a small portable one for $10 at a hardware store, but there are other ways to keep the SAK from slipping.
It only gets complicated when you are doing weird mods where you need to reshape and drill parts, etc. Layer swapping is dead simple though.
Modding sounds a lot more difficult than it is and it is really a lot of fun. But I won't bug you about it any more...
:D :D -
I do my mods with my Locksmith, a $10 Dremel knockoff and a hammer.
-
I might give it a go, I just don't want to mess it up.
-
It is really, really hard to mess up a SAK. The only parts you might mess up are the bushings and pins, which can easily be replaced. The tools, etc. are really hard to damage.
I am sure the other modders here would walk you through things and throw you a few extra pins if you mess them up. Rotokid also sells pin stock.
You will probably not run into any major problems though.
The first step is to gently pry off the scales with something very thin. I use the small blade of a SAK, but other things would work.
The scales are held on by indents that go over the bushings. So basically, you are just prying the scale holes off the bushings.
As long as you go slowly, the scales should be fine. It's better if you don't damage the attachment holes, but even if you do, you can just glue them back on.
If you just pry one scale off, you will be able to see exactly what we are talking about and what is involved in doing the mod.
Go ahead and pop one scale off right now. It will take less than a minute and you can just pop it right back on after anyways.... >:D :D :D
-
I know you can get replace pins fromm rotokid, but where do you get replacement bushings?
-
I did a Cybertool Compact once. My conclusion is that the minimal width reduction from removing the opener layer was not worth the bother and loss of several features...especially the Awl.


-
Most modders save them up when ripping apart other SAKs. I don't know if Rotokid has any for sale.
You can always buy a junker Tinker or Spartan from Tim or somewhere else if you were really stuck.
But you are right - the bushings are not readily available like the pins.
-
Well I am trading the CT lite for the regular 34 so we will see if that is any better.
-
@max6166 said:
Most modders save them up when ripping apart other SAKs. I don't know if Rotokid has any for sale.You can always buy a junker Tinker or Spartan from Tim or somewhere else if you were really stuck.
But you are right - the bushings are not readily available like the pins.
You're right, there isn't a source that I'm aware of other than from scrap SAKs or "mod fodder" as Neil calls them. :)
-
I have to admit I don't bother carefully removing bushings. I've been through enough totally beat up SAKs to have accumulated a little supply of spare bushings.
If that's all that's putting anyone off having a go I can soon drop some in a jiffy bag

As with all tasks you may not have tried before the key is just to go really slowly. It may only take someone like scibeer half an hour to put a mod together (or less) but that doesn't mean its wrong for it to take you two days :)
I'd start by taking apart a couple of cheap used knives and then building yourself a small two layer knife. A popular starting point is putting together a SAK with a couple of blades and a wood saw. Not only is it a non-commercially available SAK but it makes for a good woods knife.
As always if anyone needs a couple of beaters (and I mean beaters) to get them started just PM me. I would politely point out that if you're in the USA Tim aka FelineVet always has very cheap used SAKs in stock and offers free shipping ;)
Should you really be blessed with two left thumbs and not feel its something you can do then shoot Bill aka scibeer a line to see if he can put a knife together for you.
Yes I have been know to produce custom SAKs for cash and trades but frankly SAKs and hence parts are expensive over here.... oh and I'm not cheap >:D ;)
-
One of the simplest SAKs you can mod for yourself is a 91mm version of the Gourment.

It's just a case of taking a Spartan and removing the openers. As it's a simple layer removal than you can re-use the pins (they'll still be long enough) and so you don't even need to buy in pin stock. I also rather like it as a pocket knife myself.
-
No saw?smurf, been hanging around Mike too long :P
-
-
:D He's a bad influence ;)
I'm surprised he hasn't persuaded me to make a 74mm saw as yet :D
-
Mike, Lord of Colorful Enunciation! >:( :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

